[linux-yocto] ERROR: Failed to allocate 0x3dbd bytes below 0x800000.

Ravi Rao Ravi.Rao at us.fujitsu.com
Wed Dec 18 20:50:47 PST 2013


Hi All,
We have a custom Board which is based on mpc8349EMDS which is based on e300.
I got the Toolchain downloaded using poky-dora-10.0.0 project which 
supports e300 core
Now when I cross compile Linux kernel ver 2.6.32 the system boots up and 
works fine.
But when I cross compile Linux kernel ver 3.X the target reboots just 
after uncompressing the kernel with the error
ERROR: Failed to allocate 0x3dbd bytes below 0x800000.
device tree - allocation error
I am using the same device tree for both kernel versions !!!
Any Idea what may be causing this ??
Regards,
Ravi..

********** Console Dump ************
=> run nfsboot
Speed: 100, full duplex
Using TSEC1 device
TFTP from server 167.254.232.11; our IP address is 167.254.213.35; 
sending through gateway 167.254.213.254
Filename 'hd12_images/uImage4hd12'.
Load address: 0x1000000
Loading: #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################
done
Bytes transferred = 4054972 (3ddfbc hex)
Speed: 100, full duplex
Using TSEC1 device
TFTP from server 167.254.232.11; our IP address is 167.254.213.35; 
sending through gateway 167.254.213.254
Filename 'hd12_images/dtb4hd12.dtb'.
Load address: 0xc00000
Loading: #
done
Bytes transferred = 3517 (dbd hex)
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
    Image Name:   Linux-3.4.36-yocto-standard
    Created:      2013-12-18  19:26:38 UTC
    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
    Data Size:    4054908 Bytes =  3.9 MB
    Load Address: 00000000
    Entry Point:  00000000
    Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
    Booting using the fdt blob at 0xc00000
    Uncompressing Kernel Image ... OK
ERROR: Failed to allocate 0x3dbd bytes below 0x800000.
device tree - allocation error
Resetting the board?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/linux-yocto/attachments/20131218/6e6c631b/attachment.html>


More information about the linux-yocto mailing list