[linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
Chang, Rebecca Swee Fun
rebecca.swee.fun.chang at intel.com
Wed Apr 9 17:47:55 PDT 2014
Thanks Nitin. I will work with the dev team to make our feature branch in better shape.
Rebecca
> -----Original Message-----
> From: Kamble, Nitin A
> Sent: 10 April, 2014 8:41 AM
> To: Chang, Rebecca Swee Fun; linux-yocto at yoctoproject.org
> Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for
> Valley Island BSP
>
>
> On 4/7/2014 8:17 AM, rebecca.swee.fun.chang at intel.com wrote:
> > From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
> >
> > Hi all,
> >
> > Here is a request to create feature branch to host Valley Island PCI
> > enumerated LPSS I/O device drivers. We expect the patch series to be
> > removed over time. This will give us time to stage a working code
> > while we are working on up-stream commits to mainline and eventually
> > back-port them into LTS/LTSI. As per previous internal discussion, we
> > think that feature branch is a right approach for ISG.
> >
> > This new branch is named: isg-1.0 with -1.0 suffix as the initial
> > version of this feature branch. This feature branch was branched out
> > from linux-yocto-3.10 standard/base at the commit:
> >
> > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee
> > minnowboard-keys: Bind MinnowBoard buttons to arrow keys
> >
> > This branch was built tested to ensure no merge issues during build time.
> > The PCI enumerated I/O drivers are sanity tested by checking "dmesg",
> > "lspci -k" and "lsmod".
> >
> > Please help to create a new branch named isg-1.0 in linux-yocto-3.10
> > and pull the entire patch series into the feature branch.
> >
> > Thanks.
> >
> > Rebecca
> Hi Rebecca,
> I have sent my review feedback by email to many of the commits. The
> commits which did not get feedback from me, are already in good shape.
>
> Thanks,
> Nitin
>
> > The following changes since commit
> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:
> >
> > minnowboard-keys: Bind MinnowBoard buttons to arrow keys
> > (2014-02-12 00:08:25 -0500)
> >
> > are available in the git repository at:
> >
> > git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0
> >
> > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc
> > as/isg-1.0
> >
> > Alan Stern (1):
> > usb: gadget: don't fail when DMA isn't present
> >
> > Chang, Rebecca Swee Fun (1):
> > i2c: i801: Enable BYT SMBUS support
> >
> > Chew, Chiau Ee (14):
> > x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
> > x86/byt: enable board file for BYT LPSS PCI mode
> > dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading
> > sequence
> > dma: dw: Implement suspend/resume callbacks
> > serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
> > i2c: designware-pci: Add support for Intel BayTrail LPSS I2C
> > i2c: designware-pcidrv: Add 10-bit addressing mode functionality
> > i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value
> > spi/pxa2xx-pci: Add support for Intel BYT SPI
> > spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
> > sdhc: acpi: Fix SDCARD card detection failure
> > pwm: lpss: Enable BYT PCI mode PWM
> > pwm: lpss: Fix base_unit calculation
> > ACPI / LPSS: Add BYT ACPI mode PWM
> >
> > Chew, Kean Ho (5):
> > mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode
> > pinctrl-baytrail: add function mux checking in gpio pin request
> > pinctrl-baytrail: unmap interrupt when free the gpio pin
> > pinctrl-baytrail: enable platform device in the absent of ACPI
> > enumeration
> > pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on
> > non-ACPI system
> >
> > Felipe Balbi (1):
> > usb: gadget: udc-core: move sysfs_notify() to a workqueue
> >
> > H Hartley Sweeten (1):
> > pwm: Add sysfs interface
> >
> > Heikki Krogerus (2):
> > serial: 8250: don't change the fifo trigger level when using dma
> > serial: 8250_pci: add support for Intel BayTrail
> >
> > Maurice Petallo (3):
> > usb: dwc3: pci: Enable/disable ulpi phy refclk
> > x86/byt: Fix device name string for clkdev registration
> > mmc: sdhci: Fix continuous warning prints in ISR if shared
> > interrupt
> >
> > Mika Westerberg (1):
> > pwm: add support for Intel Low Power Subsystem PWM
> >
> > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++
> > Documentation/pwm.txt | 37 +++
> > arch/x86/Kconfig | 11 +-
> > arch/x86/platform/Makefile | 3 +
> > arch/x86/platform/byt/Makefile | 1 +
> > arch/x86/platform/byt/byt-board.c | 84 +++++++
> > drivers/acpi/acpi_lpss.c | 11 +
> > drivers/dma/Makefile | 2 +-
> > drivers/dma/dw/pci.c | 36 +++
> > drivers/i2c/busses/Makefile | 2 +-
> > drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +++++++++-
> > drivers/i2c/busses/i2c-i801.c | 2 +
> > drivers/mmc/host/sdhci-acpi.c | 7 +-
> > drivers/mmc/host/sdhci-pci.c | 3 +-
> > drivers/mmc/host/sdhci.c | 17 +-
> > drivers/pinctrl/Kconfig | 19 +-
> > drivers/pinctrl/Makefile | 1 +
> > drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++
> > drivers/pinctrl/pinctrl-baytrail.c | 76 +++++-
> > drivers/pwm/Kconfig | 21 ++
> > drivers/pwm/Makefile | 3 +
> > drivers/pwm/core.c | 25 +-
> > drivers/pwm/pwm-lpss-pci.c | 118 ++++++++++
> > drivers/pwm/pwm-lpss.c | 186 +++++++++++++++
> > drivers/pwm/pwm-lpss.h | 19 ++
> > drivers/pwm/sysfs.c | 352
> ++++++++++++++++++++++++++++
> > drivers/spi/Kconfig | 5 +-
> > drivers/spi/spi-pxa2xx-dma.c | 2 +-
> > drivers/spi/spi-pxa2xx-pci.c | 85 +++++--
> > drivers/tty/serial/8250/8250_core.c | 2 +-
> > drivers/tty/serial/8250/8250_dw.c | 43 ++++
> > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++
> > drivers/usb/dwc3/dwc3-pci.c | 23 ++
> > drivers/usb/gadget/udc-core.c | 18 +-
> > include/linux/mmc/sdhci.h | 2 +
> > include/linux/pinctrl/pinctrl-byt.h | 16 ++
> > include/linux/pwm.h | 29 ++-
> > include/linux/usb/gadget.h | 4 +
> > 38 files changed, 1731 insertions(+), 43 deletions(-)
> > create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
> > create mode 100644 arch/x86/platform/byt/Makefile
> > create mode 100644 arch/x86/platform/byt/byt-board.c
> > create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
> > create mode 100644 drivers/pwm/pwm-lpss-pci.c
> > create mode 100644 drivers/pwm/pwm-lpss.c
> > create mode 100644 drivers/pwm/pwm-lpss.h
> > create mode 100644 drivers/pwm/sysfs.c
> > create mode 100644 include/linux/pinctrl/pinctrl-byt.h
> >
More information about the linux-yocto
mailing list