[linux-yocto] [PATCH 00/21] [PATCH] valleyisland feature branch rebase

[Bruce Ashfield]

On 2014-06-12, 2:32 AM, rebecca.swee.fun.chang at intel.com wrote:
> From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
>
> Hi Bruce and all,
>

Sorry for the slow reply. I'm getting to the backlog of patches now.

> This patchset is for rebasing the valleyisland-io-1.0 feature branch.
> I recently received a notification from Greg that the Baytrail SMBUS
> back-porting commits were successfully got merged into linux-stable
> tree on branch linux-3.10.y. I foresee that you might as well merging
> in the latest 3.10 LTS commits into linux-yocto-3.10.
>
> What is the changes I've made in this patchset is, remove two commits
> related to SMBUS. These two commits had been merge in to the 3.10 LTS.
> 8567f56 i2c: i801: enable Intel BayTrail SMBUS
> 1b796c0 i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH

Confirmed. I see these in 3.10.42+, which I'll be merging to the 3.10
linux-yocto tree shortly.

>
> For other patches in this feature branch, some are still staging in queue
> to merge into 3.10 LTSI. If you have plan to merge in 3.10 LTS commits
> into linux-yocto-3.10, please help to rebase valleyisland-io-1.0 feature
> branch to this new branch.

I'll do that merge shortly, leaving all but the two changes you've 
identified
on the feature branch.

>
> After rebasing, valleyisland feature branch should have a new rev. branch
> name called: valleyisland-io-2.0.

Confirmed. I can do that as well.

Just waiting for Darren's ack on the series/strategy and I'll get
the merge started.

Bruce

>
> Thanks in advance.
>
> Regards
> Rebecca
>
> The following changes since commit ca510b5192c3b3814f1d1a19403d8847ba5db12b:
>
>    Merge tag 'v3.10.41' into standard/ltsi (2014-06-04 10:15:38 -0400)
>
> are available in the git repository at:
>
>
>    git://git.yoctoproject.org/linux-yocto-contrib rebeccas/feature-branch-rebase
>    http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/feature-branch-rebase
>
> Adrian Hunter (1):
>    mmc: sdhci: Allow for irq being shared
>
> Alan Stern (1):
>    usb: gadget: don't fail when DMA isn't present
>
> Chang Rebecca Swee Fun (1):
>    x86/byt: enable board file for Baytrail LPSS PCI mode
>
> Chew, Chiau Ee (8):
>    x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
>    serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
>    spi/pxa2xx-pci: Add support for Intel BYT SPI
>    spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
>    dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
>    i2c: designware-pci: add 10-bit addressing mode functionality for BYT
>      I2C
>    i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value
>    ACPI / LPSS: Add Intel BayTrail ACPI mode PWM
>
> Chew, Kean Ho (4):
>    pinctrl-baytrail: add function mux checking in gpio pin request
>    pinctrl-baytrail: unmap interrupt when free the gpio pin
>    pinctrl-baytrail: enable platform device in the absent of ACPI
>      enumeration
>    pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
>      system
>
> Felipe Balbi (1):
>    usb: gadget: udc-core: move sysfs_notify() to a workqueue
>
> H Hartley Sweeten (1):
>    pwm: Add sysfs interface
>
> Heikki Krogerus (2):
>    serial: 8250: don't change the fifo trigger level when using dma
>    serial: 8250_pci: add support for Intel BayTrail
>
> Mika Westerberg (2):
>    i2c: designware-pci: Add Baytrail PCI IDs
>    pwm: add support for Intel Low Power Subsystem PWM
>
>   Documentation/ABI/testing/sysfs-class-pwm  |  79 +++++++
>   Documentation/pwm.txt                      |  37 +++
>   arch/x86/Kconfig                           |  11 +-
>   arch/x86/platform/Makefile                 |   3 +
>   arch/x86/platform/byt/Makefile             |   1 +
>   arch/x86/platform/byt/byt-board.c          |  84 +++++++
>   drivers/acpi/acpi_lpss.c                   |  11 +
>   drivers/dma/dw/pci.c                       |  33 +++
>   drivers/i2c/busses/i2c-designware-pcidrv.c |  66 +++++-
>   drivers/mmc/host/sdhci.c                   |   4 +-
>   drivers/pinctrl/Kconfig                    |  19 +-
>   drivers/pinctrl/Makefile                   |   1 +
>   drivers/pinctrl/pinctrl-baytrail-dev.c     | 159 +++++++++++++
>   drivers/pinctrl/pinctrl-baytrail.c         | 101 ++++++++-
>   drivers/pwm/Kconfig                        |  14 ++
>   drivers/pwm/Makefile                       |   2 +
>   drivers/pwm/core.c                         |  25 +-
>   drivers/pwm/pwm-lpss.c                     | 183 +++++++++++++++
>   drivers/pwm/sysfs.c                        | 352 +++++++++++++++++++++++++++++
>   drivers/spi/Kconfig                        |   5 +-
>   drivers/spi/spi-pxa2xx-dma.c               |   2 +-
>   drivers/spi/spi-pxa2xx-pci.c               |  85 +++++--
>   drivers/tty/serial/8250/8250_core.c        |   2 +-
>   drivers/tty/serial/8250/8250_dw.c          |  43 ++++
>   drivers/tty/serial/8250/8250_pci.c         | 145 ++++++++++++
>   drivers/usb/gadget/udc-core.c              |  18 +-
>   include/linux/pinctrl/pinctrl-byt.h        |  16 ++
>   include/linux/pwm.h                        |  29 ++-
>   include/linux/usb/gadget.h                 |   4 +
>   29 files changed, 1491 insertions(+), 43 deletions(-)
>   create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
>   create mode 100644 arch/x86/platform/byt/Makefile
>   create mode 100644 arch/x86/platform/byt/byt-board.c
>   create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
>   create mode 100644 drivers/pwm/pwm-lpss.c
>   create mode 100644 drivers/pwm/sysfs.c
>   create mode 100644 include/linux/pinctrl/pinctrl-byt.h
>