[linux-yocto] [PATCH 00/17] [linux-yocto-3.10] standard/base: Backport Baytrail bug fixes patches from mainline kernel into Yocto Project linux kernel v3.10

Bruce Ashfield bruce.ashfield at gmail.com
Thu Aug 13 21:36:10 PDT 2015


On Tue, Aug 11, 2015 at 2:57 AM,  <wei.tee.ng at intel.com> wrote:
> From: "Ng, Wei Tee" <wei.tee.ng at intel.com>
>
> Hi all,
>
> This patch is to backport Baytrail bug fixes patches that are
> available in the upstream kernel into Yocto Project linux
> kernel v3.10. These bug fixes patches are related to I/O
> driver such as GPIO, USB and DMA.
>
> This configuration was buit and tested working on Minnowboard
> Max platform. Please review and provide feedback if any.
>
> This patch is target for linux-yocto-3.10 on standard/base
> branch.
>
> Thanks,
>
> Regards,
> Wei Tee
> The following changes since commit e94c994f434ecf4f6e2c5398388f4fb733e93fc8:
>
>   ALSA: hda - add codec ID for Valleyview2 display codec (2015-07-08 10:25:39 -0400)
>
> are available in the git repository at:
>
>   git://git.yoctoproject.org/linux-yocto-contrib ngweitee/standard-base-dev
>   http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=ngweitee/standard-base-dev

merged.

Bruce

>
> Al Cooper (1):
>   usb: Add Device Tree support to XHCI Platform driver
>
> Andy Shevchenko (1):
>   dmaengine: dw: move dw_dmac.h to where it belongs to
>
> David Cohen (1):
>   pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
>
> Oliver Neukum (1):
>   xhci: quirk for extra long delay for S4
>
> Sarah Sharp (1):
>   xhci: Don't enable/disable RWE on bus suspend/resume.
>
> Takashi Iwai (1):
>   xhci: Fix spurious wakeups after S5 on Haswell
>
> Vikas Sajjan (1):
>   usb: xhci: add the suspend/resume functionality
>
> Xenia Ragiadakou (10):
>   xhci: add traces for debug messages in xhci_address_device()
>   xhci: add trace for debug messages related to changing contexts
>   xhci: add trace for debug messages related to quirks
>   xhci: add trace for debug messages related to endpoint reset
>   xhci: add xhci_address_ctx trace event
>   xhci: add xhci_cmd_completion trace event
>   xhci: trace debug statements for urb cancellation
>   xhci: trace debug messages related to driver initialization and
>     unload
>   xhci: fix dma mask setup in xhci.c
>   xhci: replace xhci_readl() with readl()
>
>  Documentation/devicetree/bindings/usb/usb-xhci.txt |   14
>  MAINTAINERS                                        |    2 +-
>  arch/avr32/mach-at32ap/at32ap700x.c                |    2 +-
>  arch/avr32/mach-at32ap/include/mach/atmel-mci.h    |    2 +-
>  drivers/dma/dw/internal.h                          |    2 +-
>  drivers/dma/dw/regs.h                              |    6 +-
>  drivers/pinctrl/pinctrl-baytrail.c                 |    2 +-
>  drivers/usb/host/Makefile                          |    4
>  drivers/usb/host/xhci-dbg.c                        |   50 +--
>  drivers/usb/host/xhci-hub.c                        |  104 +++---
>  drivers/usb/host/xhci-mem.c                        |  134 +++++---
>  drivers/usb/host/xhci-pci.c                        |   39 ++-
>  drivers/usb/host/xhci-plat.c                       |   46 +++
>  drivers/usb/host/xhci-ring.c                       |   97 ++++--
>  drivers/usb/host/xhci-trace.c                      |   15
>  drivers/usb/host/xhci-trace.h                      |  146 +++++++++
>  drivers/usb/host/xhci.c                            |  339 ++++++++++++--------
>  drivers/usb/host/xhci.h                            |    9 +-
>  .../linux/{dw_dmac.h => platform_data/dma-dw.h}    |    0
>  include/sound/atmel-abdac.h                        |    2 +-
>  include/sound/atmel-ac97c.h                        |    2 +-
>  sound/atmel/abdac.c                                |    2 +-
>  sound/atmel/ac97c.c                                |    2 +-
>  23 files changed, 693 insertions(+), 328 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/usb-xhci.txt
>  create mode 100644 drivers/usb/host/xhci-trace.c
>  create mode 100644 drivers/usb/host/xhci-trace.h
>  rename include/linux/{dw_dmac.h => platform_data/dma-dw.h} (100%)
>
> --
> 1.7.9.5
>
> --
> _______________________________________________
> linux-yocto mailing list
> linux-yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/linux-yocto



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


More information about the linux-yocto mailing list