[linux-yocto] [PATCH 14/52] ARM: axxia: Remove unused files
Daniel Dragomir
daniel.dragomir at windriver.com
Wed Jan 28 09:18:28 PST 2015
From: Anders Berg <anders.berg at avagotech.com>
Signed-off-by: Anders Berg <anders.berg at avagotech.com>
---
arch/arm/mach-axxia/Makefile | 1 -
arch/arm/mach-axxia/axxia.c | 1 -
arch/arm/mach-axxia/i2c.c | 210 -------------------------------------------
arch/arm/mach-axxia/i2c.h | 35 --------
4 files changed, 247 deletions(-)
delete mode 100644 arch/arm/mach-axxia/i2c.c
delete mode 100644 arch/arm/mach-axxia/i2c.h
diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile
index 720857b..0d550e4 100644
--- a/arch/arm/mach-axxia/Makefile
+++ b/arch/arm/mach-axxia/Makefile
@@ -9,7 +9,6 @@ obj-y += ncr.o
obj-y += timers.o
obj-y += pci.o
obj-y += ddr_retention.o ddr_shutdown.o
-obj-$(CONFIG_I2C) += i2c.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_ARCH_AXXIA_GIC) += axxia-gic.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o lsi_power_management.o
diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c
index 7777579..768b3ba 100644
--- a/arch/arm/mach-axxia/axxia.c
+++ b/arch/arm/mach-axxia/axxia.c
@@ -53,7 +53,6 @@
#include <mach/ncr.h>
#include "axxia.h"
#include "pci.h"
-#include "i2c.h"
#ifdef CONFIG_AXXIA_RIO
#include <mach/rio.h>
#endif
diff --git a/arch/arm/mach-axxia/i2c.c b/arch/arm/mach-axxia/i2c.c
deleted file mode 100644
index 2fd8f78..0000000
--- a/arch/arm/mach-axxia/i2c.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * linux/arch/arm/mach-axxia/i2c.c
- *
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2013 LSI Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/i2c.h>
-#include <linux/i2c-axxia.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/interrupt.h>
-
-#include <mach/irqs.h>
-
-#include "i2c.h"
-
-/*****************************************************************************
-* Local Definitions & State
-*****************************************************************************/
-
-static const char name[] = "axxia_ai2c";
-
-
-static struct axxia_i2c_bus_platform_data *axxia_i2cx_ports;
-static unsigned int axxia_i2cx_port_count;
-static struct platform_device *axxia_i2cx_devices;
-static struct platform_device **axxia_i2cx_device_ptrs;
-
-
-static inline
-int
-axxia_add_i2c_bus(
- struct device_node *np,
- struct platform_device *pdev,
- int ndx,
- int bus_id)
-{
- struct axxia_i2c_bus_platform_data *pdata;
- const u32 pval;
- const char *val;
- int portno;
-
- /* Get the port number from the device-tree */
- if (!of_property_read_u32(np, "port", (u32 *)&pval)) {
- portno = pval;
- } else {
- pr_err("I2C: Can't find port number for %s\n",
- np->full_name);
- return -ENXIO;
- }
- if (portno > axxia_i2cx_port_count) {
- pr_err("I2C: port number out of range for %s\n",
- np->full_name);
- return -ENXIO;
- }
-
- pdata = &axxia_i2cx_ports[ndx];
- pdata->node = of_node_get(np);
-
- pdata->index = portno;
-
- /* Verify device type */
- val = of_get_property(np, "device_type", NULL);
- if (strcmp(val, "i2c")) {
- pr_err("I2C%d: missing or incorrect device_type for %s\n",
- portno, np->full_name);
- return -ENXIO;
- }
-
- /* Get or insert bus name */
- val = of_get_property(np, "bus_name", NULL);
- if (val)
- strncpy(pdata->name, val, MAX_AXXIA_I2C_HWMOD_NAME_LEN);
- else
- sprintf(pdata->name, "i2c%d", portno);
-
- pdata->rev = AXXIA_I2C_IP_VERSION_2; /* AXM55xx */
-
- pdata->flags = AXXIA_I2C_FLAGS_NONE;
-
- /* Get the bus number from the device-tree */
- if (!of_property_read_u32(np, "bus", (u32 *)&pval))
- pdata->bus_nr = pval;
- else
- pdata->bus_nr = ~0;
-
- /* Fetch config space registers address */
- if (of_address_to_resource(np, 0, &pdata->dev_space)) {
- pr_err("%s: Can't get I2C device space !",
- np->full_name);
- return -ENXIO;
- }
- pdata->dev_space.flags = IORESOURCE_MEM;
-
- /* Hookup an interrupt handler -- TBD, maybe later */
- pdata->int_space.start = irq_of_parse_and_map(np, 0);
- pdata->int_space.flags = IORESOURCE_IRQ;
-
- if (pdata->bus_nr == ~0) {
- pr_info("I2C Port %d found; bus#=<auto> '%s'\n",
- portno, pdata->name);
- } else {
- pr_info("I2C Port %d found; bus#=i%d '%s'\n",
- portno, pdata->bus_nr, pdata->name);
- }
- pr_info(" dev_space start = 0x%012llx, end = 0x%012llx\n",
- pdata->dev_space.start, pdata->dev_space.end);
- pr_info(" mappedIrq#=%x\n", (unsigned int)pdata->int_space.start);
-
- /* Fill in the device */
- pdev->id = ndx;
- pdev->name = name;
- pdev->num_resources = 2;
- pdev->resource = &pdata->dev_space;
- pdev->dev.platform_data = pdata;
-
- return 0;
-}
-
-
-/**
- * axxia_register_i2c_busses - register I2C busses with device descriptors
- *
- * Returns 0 on success or an error code.
- */
-int __init
-axxia_register_i2c_busses(
- void)
-{
- int i;
- int err;
- struct device_node *np;
-
- /* How many of these devices will be needed? */
- axxia_i2cx_port_count = 0;
- for_each_compatible_node(np, NULL, "lsi,api2c")
- axxia_i2cx_port_count++;
-
- if (axxia_i2cx_port_count == 0)
- return -ENXIO;
-
- /* Allocate memory */
- axxia_i2cx_ports = kzalloc(axxia_i2cx_port_count*
- sizeof(struct axxia_i2c_bus_platform_data),
- GFP_KERNEL);
- if (!axxia_i2cx_ports) {
- pr_warn("I2C: failed to allocate ports array\n");
- return -ENOMEM;
- }
- memset(axxia_i2cx_ports, 0,
- axxia_i2cx_port_count*
- sizeof(struct axxia_i2c_bus_platform_data));
-
- axxia_i2cx_devices = kzalloc(axxia_i2cx_port_count*
- sizeof(struct platform_device),
- GFP_KERNEL);
- if (!axxia_i2cx_devices) {
- pr_warn("I2C: failed to allocate devices array\n");
- return -ENOMEM;
- }
- memset(axxia_i2cx_devices, 0,
- axxia_i2cx_port_count*sizeof(struct platform_device));
-
- axxia_i2cx_device_ptrs = kzalloc(axxia_i2cx_port_count*
- sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!axxia_i2cx_device_ptrs) {
- pr_warn("I2C: failed to allocate device ptrs array\n");
- return -ENOMEM;
- }
- memset(axxia_i2cx_device_ptrs, 0,
- axxia_i2cx_port_count*sizeof(struct platform_device *));
-
- /* Now parse and fill in the device entries */
- i = 0;
- for_each_compatible_node(np, NULL, "lsi,api2c")
- {
- axxia_i2cx_device_ptrs[i] = &axxia_i2cx_devices[i];
-
- err = axxia_add_i2c_bus(np, axxia_i2cx_device_ptrs[i],
- i, i+ARCH_AXXIA_MAX_I2C_BUS_NR);
- if (err == 0)
- i++;
- }
-
- return platform_add_devices(axxia_i2cx_device_ptrs, i);
-}
diff --git a/arch/arm/mach-axxia/i2c.h b/arch/arm/mach-axxia/i2c.h
deleted file mode 100644
index 8e31379..0000000
--- a/arch/arm/mach-axxia/i2c.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2013 LSI Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#ifndef __ASM__ARCH_AXXIA_I2C_H
-#define __ASM__ARCH_AXXIA_I2C_H
-
-
-/*
- * Default bus id to expect for an AXXIA platform.
- */
-#define ARCH_AXXIA_MAX_I2C_BUSSES 1
-#define ARCH_AXXIA_MAX_I2C_BUS_NR 2
-
-
-extern int axxia_register_i2c_busses(void);
-
-
-#endif /* __ASM__ARCH_AXXIA_I2C_H */
--
1.8.1.4
More information about the linux-yocto
mailing list