[linux-yocto] [PATCH 09/10] features/usb/serial-vendors: Add new set of configs for USB_SERIAL devices

[Darren Hart]

On 7/1/15 9:57 AM, Saul Wold wrote:
> This config fragment will enable the various vendor module code
> for different USB serial devices to enable serial over usb.

> Signed-off-by: Saul Wold <sgw at linux.intel.com>
> ---
>  meta/cfg/kernel-cache/features/usb/serial-vendor.cfg | 17 +++++++++++++++++
>  meta/cfg/kernel-cache/features/usb/serial-vendor.scc |  4 ++++
>  2 files changed, 21 insertions(+)
>  create mode 100644 meta/cfg/kernel-cache/features/usb/serial-vendor.cfg
>  create mode 100644 meta/cfg/kernel-cache/features/usb/serial-vendor.scc
> 
> diff --git a/meta/cfg/kernel-cache/features/usb/serial-vendor.cfg b/meta/cfg/kernel-cache/features/usb/serial-vendor.cfg
> new file mode 100644
> index 0000000..be74467
> --- /dev/null
> +++ b/meta/cfg/kernel-cache/features/usb/serial-vendor.cfg
> @@ -0,0 +1,17 @@
> +CONFIG_USB_SERIAL=y
> +CONFIG_USB_SERIAL_GENERIC=y
> +CONFIG_USB_SERIAL_ARK3116=m
> +CONFIG_USB_SERIAL_BELKIN=m
> +CONFIG_USB_SERIAL_CH341=m
> +CONFIG_USB_SERIAL_CP210X=m
> +CONFIG_USB_SERIAL_FTDI_SIO=m
> +CONFIG_USB_SERIAL_F81232=m
> +CONFIG_USB_SERIAL_IPW=m
> +CONFIG_USB_SERIAL_PL2303=m
> +CONFIG_USB_SERIAL_OTI6858=m
> +CONFIG_USB_SERIAL_QUALCOMM=m
> +CONFIG_USB_SERIAL_SPCP8X5=m
> +CONFIG_USB_SERIAL_SIERRAWIRELESS=m
> +CONFIG_USB_SERIAL_TI=m
> +CONFIG_USB_SERIAL_WWAN=m
> +CONFIG_USB_SERIAL_OPTION=m
> diff --git a/meta/cfg/kernel-cache/features/usb/serial-vendor.scc b/meta/cfg/kernel-cache/features/usb/serial-vendor.scc

Suggest serial-all.scc instead of serial-vendor, just to keep it
consistent with things like media-all.scc.

> new file mode 100644
> index 0000000..3b06793
> --- /dev/null
> +++ b/meta/cfg/kernel-cache/features/usb/serial-vendor.scc
> @@ -0,0 +1,4 @@
> +define KFEATURE_DESCRIPTION "Enable USB serial support for all vendors"
> +define KFEATURE_COMPATIBILITY board
> +
> +kconf hardware serial_vendor.cfg
> 

-- 
Darren Hart
Intel Open Source Technology Center