[linux-yocto] [kernel-cache] [yocto-4.9] [PATCH] bsp/axxiaarm*: Enable some Axxia specific drivers

[Dragomir Daniel]

On 18.01.2018 17:28, Bruce Ashfield wrote:
> merged to the 4.9 branch. Let me know if it is also required
> on any newer kernels.
>
> Bruce

I'll send soon the initial fragments for 4.12 which include this patch.

Thanks,
Daniel

>
> On 01/16/2018 12:47 PM, Daniel Dragomir wrote:
>> AXXIA_FAULT: Axxia Fault Handlers
>> GPIO_AXXIA: PrimeCell PL061 GPIO support for Axxia
>> EDAC_AXXIA_L3_5500: AXXIA EDAC L3 Controller for 5500
>> EDAC_AXXIA_L3_5600: AXXIA EDAC L3 Controller for 5600
>>
>> Signed-off-by: Daniel Dragomir <daniel.dragomir at windriver.com>
>> ---
>>   bsp/axxiaarm/axxiaarm.cfg     | 3 ++-
>>   bsp/axxiaarm/edac.cfg         | 1 +
>>   bsp/axxiaarm64/axxiaarm64.cfg | 4 +++-
>>   bsp/axxiaarm64/edac.cfg       | 3 ++-
>>   4 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/bsp/axxiaarm/axxiaarm.cfg b/bsp/axxiaarm/axxiaarm.cfg
>> index 82f753c..038b30a 100644
>> --- a/bsp/axxiaarm/axxiaarm.cfg
>> +++ b/bsp/axxiaarm/axxiaarm.cfg
>> @@ -145,6 +145,7 @@ CONFIG_BLK_DEV_LOOP=y
>>   CONFIG_LSI_MTC=y
>>   CONFIG_LSI_NCR=y
>>   CONFIG_ATA=y
>> +CONFIG_AXXIA_FAULT=y
>>   CONFIG_AXXIA_MDIO=y
>>     #
>> @@ -192,7 +193,7 @@ CONFIG_NETWORK_PHY_TIMESTAMPING=y
>>   #
>>   CONFIG_GPIOLIB=y
>>   CONFIG_GPIO_SYSFS=y
>> -CONFIG_GPIO_PL061=y
>> +CONFIG_GPIO_AXXIA=y
>>   CONFIG_GPIO_GENERIC_PLATFORM=y
>>     CONFIG_WATCHDOG=y
>> diff --git a/bsp/axxiaarm/edac.cfg b/bsp/axxiaarm/edac.cfg
>> index 23da7ad..fac2726 100644
>> --- a/bsp/axxiaarm/edac.cfg
>> +++ b/bsp/axxiaarm/edac.cfg
>> @@ -15,6 +15,7 @@ CONFIG_EDAC=y
>>   CONFIG_EDAC_MM_EDAC=y
>>   CONFIG_EDAC_AXXIA_SYSMEM_5500=y
>>   CONFIG_EDAC_AXXIA_L3=y
>> +CONFIG_EDAC_AXXIA_L3_5500=y
>>   CONFIG_EDAC_AXXIA_L2_CPU_5500=y
>>     # CONFIG_LSI_SMMON is not set
>> diff --git a/bsp/axxiaarm64/axxiaarm64.cfg 
>> b/bsp/axxiaarm64/axxiaarm64.cfg
>> index 73096a3..d68ef7d 100644
>> --- a/bsp/axxiaarm64/axxiaarm64.cfg
>> +++ b/bsp/axxiaarm64/axxiaarm64.cfg
>> @@ -106,6 +106,7 @@ CONFIG_LSI_NCR=y
>>   CONFIG_ARCH_AXXIA_NCR_RESET_CHECK=y
>>   CONFIG_AXXIA_OEM=y
>>   CONFIG_AXXIA_PEI=y
>> +CONFIG_AXXIA_FAULT=y
>>   CONFIG_AXXIA_MDIO=y
>>     #
>> @@ -166,7 +167,7 @@ CONFIG_SPI_SPIDEV=y
>>   #
>>   CONFIG_GPIOLIB=y
>>   CONFIG_GPIO_SYSFS=y
>> -CONFIG_GPIO_PL061=y
>> +CONFIG_GPIO_AXXIA=y
>>   CONFIG_GPIO_GENERIC_PLATFORM=y
>>   CONFIG_GPIO_XGENE=y
>>   @@ -206,6 +207,7 @@ CONFIG_LEGACY_PTY_COUNT=16
>>   # USB GPIO expanders
>>   #
>>   CONFIG_POWER_RESET_AXXIA=y
>> +CONFIG_POWER_RESET_AXXIA_DDR_RETENTION=y
>>   # CONFIG_HWMON is not set
>>   # CONFIG_WATCHDOG is not set
>>   diff --git a/bsp/axxiaarm64/edac.cfg b/bsp/axxiaarm64/edac.cfg
>> index d9fc4f3..b5e25b0 100644
>> --- a/bsp/axxiaarm64/edac.cfg
>> +++ b/bsp/axxiaarm64/edac.cfg
>> @@ -12,10 +12,11 @@
>> #.........................................................................
>>     CONFIG_EDAC=y
>> +# CONFIG_EDAC_DEBUG is not set
>>   CONFIG_EDAC_MM_EDAC=y
>>   CONFIG_EDAC_AXXIA_SYSMEM_5600=y
>>   CONFIG_EDAC_AXXIA_CMEM_5600=y
>> -# CONFIG_EDAC_AXXIA_L3 is not set
>> +CONFIG_EDAC_AXXIA_L3_5600=y
>>   CONFIG_EDAC_AXXIA_L2_CPU_5600=y
>>     # CONFIG_LSI_SMMON is not set
>>
>