[linux-yocto] [PATCH 0000/1228] xilinx-zynqmp: add sdk patches
qwang2
quanyang.wang at windriver.com
Mon Jul 8 19:23:54 PDT 2019
On 7/8/19 9:14 PM, Bruce Ashfield wrote:
> On Thu, Jul 4, 2019 at 5:59 AM <quanyang.wang at windriver.com> wrote:
>> From: Quanyang Wang <quanyang.wang at windriver.com>
>>
>> Hi Bruce,
>>
>> I am working on BSP xilinx-zynqmp.
>>
>> Could you please help to merge these patches to:
>>
>> linux-yocto-dev standard/xilinx-zynqmp
>>
>> These patches are picked from:
>>
>> https://github.com/Xilinx/linux-xlnx.git xlnx_rebase_v4.19
> We already have a 4.19 branch based on Michal's tree, which was
> curated and selected for the soc support.
> Did you you look at the one in linux-yocto 4.19 ? Since it is a
> specifically selected set of patches and might be a better starting
> point.
Hi Bruce,
I checked sdk patches in linux-yocto v4.19/standard/xlnx-soc*, *and they
are same
as the ones which I picked from the
https://github.com/Xilinx/linux-xlnx.git xlnx_rebase_v4.19.
And about 20 new patches in linux-xlnx.git but not in linux-yocto.
Thanks,
Quanyang
>
> Before I introduce a 5.x branch, I'd want to hear his opinion on the
> branch and the selections that you made, versus what he would have
> done.
>
> I've added Michal to the thread.
>
> Bruce
>
>> I verify these patches on the board Xilinx ZYNQMP ZCU102 REV 1.0, and it now
>> can boot the board successfully. But most of bsp features haven't been checked and tested.
>>
>> ------here is the boot log-----
>> Booting Linux on physical CPU 0x0000000000 [0x410fd034]
>> Linux version 5.2.0-rc7-yoctodev-standard (oe-user at oe-host) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Thu Jul 4 08:14:53 UTC 2019
>> Machine model: ZynqMP ZCU102 Rev1.0
>> earlycon: cdns0 at MMIO 0x00000000ff000000 (options '')
>> printk: bootconsole [cdns0] enabled
>> efi: Getting EFI parameters from FDT:
>> efi: UEFI not found.
>> cma: Reserved 16 MiB at 0x000000007ec00000
>> psci: probing for conduit method from DT.
>> psci: PSCIv1.1 detected in firmware.
>> psci: Using standard PSCI v0.2 function IDs
>> psci: MIGRATE_INFO_TYPE not supported.
>> psci: SMC Calling Convention v1.1
>> percpu: Embedded 30 pages/cpu s85208 r8192 d29480 u122880
>> Detected VIPT I-cache on CPU0
>> CPU features: detected: ARM erratum 845719
>> Speculative Store Bypass Disable mitigation not required
>> Built 1 zonelists, mobility grouping on. Total pages: 1031940
>> Kernel command line: console=ttyPS0,115200n8 earlycon=cdns,0xFF000000 clk_ignore_unused root=/dev/nfs rw nfsroot=128.224.162.137:/home/wrsadmin/debug/nfsroot-xlinx,v3,tcp ip=dhcp
>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> software IO TLB: mapped [mem 0x7ac00000-0x7ec00000] (64MB)
>> Memory: 4013180K/4193280K available (10876K kernel code, 1218K rwdata, 2836K rodata, 1216K init, 757K bss, 163716K reserved, 16384K cma-reserved)
>> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> ftrace: allocating 36834 entries in 144 pages
>> rcu: Preemptible hierarchical RCU implementation.
>> rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
>> Tasks RCU enabled.
>> rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
>> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>> NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
>> GIC: Adjusting CPU interface base to 0x00000000f902f000
>> GIC: Using split EOI/Deactivate mode
>> random: get_random_bytes called from start_kernel+0x324/0x4c0 with crng_init=0
>> arch_timer: cp15 timer(s) running at 99.99MHz (phys).
>> clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x170f8de2d3, max_idle_ns: 440795206112 ns
>> sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
>> Console: colour dummy device 80x25
>> Calibrating delay loop (skipped), value calculated using timer frequency.. 199.98 BogoMIPS (lpj=399960)
>> pid_max: default: 32768 minimum: 301
>> LSM: Security Framework initializing
>> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>> Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>> *** VALIDATE proc ***
>> *** VALIDATE cgroup1 ***
>> *** VALIDATE cgroup2 ***
>> ASID allocator initialised with 32768 entries
>> rcu: Hierarchical SRCU implementation.
>> EFI services will not be available.
>> smp: Bringing up secondary CPUs ...
>> Detected VIPT I-cache on CPU1
>> CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
>> Detected VIPT I-cache on CPU2
>> CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
>> Detected VIPT I-cache on CPU3
>> CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
>> smp: Brought up 1 node, 4 CPUs
>> SMP: Total of 4 processors activated.
>> CPU features: detected: 32-bit EL0 Support
>> CPU features: detected: CRC32 instructions
>> CPU: All CPU(s) started at EL2
>> alternatives: patching kernel code
>> devtmpfs: initialized
>> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>> futex hash table entries: 1024 (order: 4, 65536 bytes)
>> xor: measuring software checksum speed
>> 8regs : 2360.000 MB/sec
>> 32regs : 2706.000 MB/sec
>> arm64_neon: 2018.000 MB/sec
>> xor: using function: 32regs (2706.000 MB/sec)
>> pinctrl core: initialized pinctrl subsystem
>> DMI not present or invalid.
>> NET: Registered protocol family 16
>> cpuidle: using governor ladder
>> hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
>> DMA: preallocated 256 KiB pool for atomic allocations
>> HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>> HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
>> HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>> HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
>> raid6: neonx8 gen() 1521 MB/s
>> raid6: neonx8 xor() 1442 MB/s
>> raid6: neonx4 gen() 1474 MB/s
>> raid6: neonx4 xor() 1409 MB/s
>> raid6: neonx2 gen() 1128 MB/s
>> raid6: neonx2 xor() 1175 MB/s
>> raid6: neonx1 gen() 737 MB/s
>> raid6: neonx1 xor() 886 MB/s
>> raid6: int64x8 gen() 1166 MB/s
>> raid6: int64x8 xor() 763 MB/s
>> raid6: int64x4 gen() 983 MB/s
>> raid6: int64x4 xor() 736 MB/s
>> raid6: int64x2 gen() 683 MB/s
>> raid6: int64x2 xor() 600 MB/s
>> raid6: int64x1 gen() 451 MB/s
>> raid6: int64x1 xor() 463 MB/s
>> raid6: using algorithm neonx8 gen() 1521 MB/s
>> raid6: .... xor() 1442 MB/s, rmw enabled
>> raid6: using neon recovery algorithm
>> vgaarb: loaded
>> SCSI subsystem initialized
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> media: Linux media interface: v0.10
>> videodev: Linux video capture interface: v2.00
>> pps_core: LinuxPPS API ver. 1 registered
>> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
>> PTP clock support registered
>> EDAC MC: Ver: 3.0.0
>> zynqmp-ipi-mbox mailbox at ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
>> FPGA manager framework
>> clocksource: Switched to clocksource arch_sys_counter
>> *** VALIDATE hugetlbfs ***
>> NET: Registered protocol family 2
>> tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
>> TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>> TCP: Hash tables configured (established 32768 bind 32768)
>> UDP hash table entries: 2048 (order: 4, 65536 bytes)
>> UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>> NET: Registered protocol family 1
>> RPC: Registered named UNIX socket transport module.
>> RPC: Registered udp transport module.
>> RPC: Registered tcp transport module.
>> RPC: Registered tcp NFSv4.1 backchannel transport module.
>> PCI: CLS 0 bytes, default 64
>> hw perfevents: no interrupt-affinity property for /pmu, guessing.
>> hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
>> kprobes: failed to populate blacklist: -22
>> Please take care of using kprobes.
>> workingset: timestamp_bits=46 max_order=20 bucket_order=0
>> NFS: Registering the id_resolver key type
>> Key type id_resolver registered
>> Key type id_legacy registered
>> jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>> io scheduler mq-deadline registered
>> io scheduler kyber registered
>> cacheinfo: Unable to detect cache hierarchy for CPU 0
>> brd: module loaded
>> loop: module loaded
>> libphy: Fixed MDIO Bus: probed
>> CAN device driver interface
>> usbcore: registered new interface driver usb-storage
>> rtc_zynqmp ffa60000.rtc: registered as rtc0
>> device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel at redhat.com
>> EDAC MC: ECC not enabled
>> EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
>> sdhci: Secure Digital Host Controller Interface driver
>> sdhci: Copyright(c) Pierre Ossman
>> sdhci-pltfm: SDHCI platform and OF driver helper
>> zynqmp_firmware_probe Platform Management API v1.1
>> zynqmp_firmware_probe Trustzone version v1.0
>> zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl initialized
>> zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt, ret = -22
>> usbcore: registered new interface driver usbhid
>> usbhid: USB HID core driver
>> fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
>> u32 classifier
>> Actions configured
>> NET: Registered protocol family 10
>> Segment Routing with IPv6
>> sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>> NET: Registered protocol family 17
>> can: controller area network core (rev 20170425 abi 9)
>> NET: Registered protocol family 29
>> can: raw protocol (rev 20170425)
>> can: broadcast manager protocol (rev 20170425 t)
>> can: netlink gateway (rev 20170425) max_hops=1
>> Key type dns_resolver registered
>> registered taskstats version 1
>> Btrfs loaded, crc32c=crc32c-generic
>> Key type encrypted registered
>> ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 39, base_baud = 6249999) is a xuartps É¥¹Ñ console [ttyPS0] enabled
>> printk: console [ttyPS0] enabled
>> printk: bootconsole [cdns0] disabled
>> printk: bootconsole [cdns0] disabled
>> ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 40, base_baud = 6249999) is a xuartps
>> xilinx-psgtr fd400000.zynqmp_phy: failed to get sata_rst reset signal
>> xilinx-psgtr fd400000.zynqmp_phy: failed to get resets: -524
>> xilinx-psgtr: probe of fd400000.zynqmp_phy failed with error -524
>> nwl-pcie fd0e0000.pcie: Link is DOWN
>> nwl-pcie fd0e0000.pcie: host bridge /amba/pcie at fd0e0000 ranges:
>> nwl-pcie fd0e0000.pcie: MEM 0xe0000000..0xefffffff -> 0xe0000000
>> nwl-pcie fd0e0000.pcie: MEM 0x600000000..0x7ffffffff -> 0x600000000
>> nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
>> pci_bus 0000:00: root bus resource [bus 00-ff]
>> pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
>> pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
>> pci 0000:00:00.0: [10ee:d021] type 01 class 0x060400
>> pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
>> pci 0000:00:00.0: PCI bridge to [bus 01-0c]
>> pcieport 0000:00:00.0: PME: Signaling with IRQ 45
>> xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
>> xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
>> ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
>> m25p80 spi0.0: found n25q512a, expected m25p80
>> m25p80 spi0.0: n25q512a (131072 Kbytes)
>> 4 fixed-partitions partitions found on MTD device spi0.0
>> Creating 4 MTD partitions on "spi0.0":
>> 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
>> 0x000000100000-0x000000600000 : "qspi-linux"
>> 0x000000600000-0x000000620000 : "qspi-device-tree"
>> 0x000000620000-0x000000c00000 : "qspi-rootfs"
>> macb ff0e0000.ethernet: Not enabling partial store and forward
>> libphy: MACB_mii_bus: probed
>> Generic PHY ff0e0000.ethernet-ffffffff:0c: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:0c, irq=POLL)
>> macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 22 (00:0a:35:04:9a:86)
>> dwc3-of-simple ff9d0000.usb0: dwc3_simple_set_phydata: Can't find usb3-phy
>> dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
>> pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator
>> GPIO line 496 (sel0) hogged as output/low
>> GPIO line 497 (sel1) hogged as output/high
>> GPIO line 498 (sel2) hogged as output/high
>> GPIO line 499 (sel3) hogged as output/high
>> zynqmp_pll_disable() clock disable failed for apll_int, ret = -13
>> pca953x 0-0021: 0-0021 supply vcc not found, using dummy regulator
>> ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
>> i2c i2c-0: Added multiplexed i2c bus 2
>> ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
>> ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
>> ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
>> i2c i2c-0: Added multiplexed i2c bus 3
>> i2c i2c-0: Added multiplexed i2c bus 4
>> i2c i2c-0: Added multiplexed i2c bus 5
>> pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
>> cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 24
>> at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
>> i2c i2c-1: Added multiplexed i2c bus 6
>> i2c i2c-1: Added multiplexed i2c bus 7
>> si570 8-005d: registered, current frequency 300000000 Hz
>> i2c i2c-1: Added multiplexed i2c bus 8
>> si570 9-005d: registered, current frequency 148500000 Hz
>> i2c i2c-1: Added multiplexed i2c bus 9
>> i2c i2c-1: Added multiplexed i2c bus 10
>> i2c i2c-1: Added multiplexed i2c bus 11
>> i2c i2c-1: Added multiplexed i2c bus 12
>> i2c i2c-1: Added multiplexed i2c bus 13
>> pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
>> i2c i2c-1: Added multiplexed i2c bus 14
>> i2c i2c-1: Added multiplexed i2c bus 15
>> i2c i2c-1: Added multiplexed i2c bus 16
>> i2c i2c-1: Added multiplexed i2c bus 17
>> i2c i2c-1: Added multiplexed i2c bus 18
>> i2c i2c-1: Added multiplexed i2c bus 19
>> i2c i2c-1: Added multiplexed i2c bus 20
>> i2c i2c-1: Added multiplexed i2c bus 21
>> pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
>> cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 25
>> cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at (____ptrval____) with timeout 60s
>> mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
>> ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
>> dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
>> ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
>> dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
>> printk: console [netcon0] enabled
>> netconsole: network logging started
>> rtc_zynqmp ffa60000.rtc: setting system clock to 2019-07-04T08:16:49 UTC (1562228209)
>> macb ff0e0000.ethernet eth0: link up (1000/Full)
>> mmc0: new high speed SDHC card at address 0007
>> pps pps0: new PPS source ptp0
>> mmcblk0: mmc0:0007 SD8GB 7.44 GiB
>> macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered.
>> mmcblk0: p1 p2
>> ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
>> dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
>> Sending DHCP requests ., OK
>> IP-Config: Got DHCP answer from 128.224.162.1, my address is 128.224.162.220
>> IP-Config: Complete:
>> device=eth0, hwaddr=00:0a:35:04:9a:86, ipaddr=128.224.162.220, mask=255.255.254.0, gw=128.224.162.1
>> host=128.224.162.220, domain=corp.ad.wrs.com, nis-domain=swamp
>> bootserver=0.0.0.0, rootserver=128.224.162.137, rootpath=
>> nameserver0=128.224.160.11, nameserver1=128.224.160.12, nameserver2=147.11.57.128
>> ntpserver0=147.11.100.50, ntpserver1=147.11.1.11, ntpserver2=147.11.49.4
>> clk: Not disabling unused clocks
>> md: Waiting for all devices to be available before autodetect
>> md: If you don't use raid, use raid=noautodetect
>> md: Autodetecting RAID arrays.
>> md: autorun ...
>> md: ... autorun DONE.
>> random: fast init done
>> VFS: Mounted root (nfs filesystem) on device 0:18.
>> devtmpfs: mounted
>> Freeing unused kernel memory: 1216K
>> Run /sbin/init as init process
>> IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> systemd[1]: systemd 242-19-gdb2e367+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
>> systemd[1]: Detected architecture arm64.
>>
>> Welcome to Wind River Linux development_userspace-next_toolchain-next_linux-yocto-dev 19.27!
>>
>> systemd[1]: Set hostname to <xilinx-zynqmp>.
>> random: systemd: uninitialized urandom read (16 bytes read)
>> systemd[1]: Initializing machine ID from random generator.
>> systemd[1]: Installed transient /etc/machine-id file.
>> systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
>> systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
>> systemd[1]: /lib/systemd/system/rpcbind.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly.
>> random: systemd: uninitialized urandom read (16 bytes read)
>> systemd[1]: Listening on initctl Compatibility Named Pipe.
>> [ OK ] Listening on initctl Compatibility Named Pipe.
>> random: systemd: uninitialized urandom read (16 bytes read)
>> systemd[1]: Listening on udev Control Socket.
>> [ OK ] Listening on udev Control Socket.
>> [ OK ] Listening on Syslog Socket.
>> [ OK ] Created slice system-getty.slice.
>> urandom_read: 2 callbacks suppressed
>> random: systemd: uninitialized urandom read (16 bytes read)
>> [ OK ] Listening on Journal Socket (/dev/log).
>> random: systemd: uninitialized urandom read (16 bytes read)
>> [ OK ] Created slice User and Session Slice.
>> random: systemd: uninitialized urandom read (16 bytes read)
>> [ OK ] Listening on udev Kernel Socket.
>> [ OK ] Started Dispatch Password …ts to Console Directory Watch.
>> [ OK ] Listening on Journal Socket.
>> Starting Load Kernel Modules...
>> Mounting Huge Pages File System...
>> Starting udev Coldplug all Devices...
>> [ OK ] Started Hardware RNG Entropy Gatherer Daemon.
>> [ OK ] Reached target Remote File Systems.
>> Starting Create list of re…odes for the current kernel...
>> Starting Remount Root and Kernel File Systems...
>> [ OK ] Reached target Slices.
>> [ OK ] Listening on Network Service Netlink Socket.
>> [ OK ] Reached target Swap.
>> Mounting Temporary Directory (/tmp)...
>> [ OK ] Created slice system-serial\x2dgetty.slice.
>> Mounting Kernel Debug File System...
>> [ OK ] Started Forward Password R…uests to Wall Directory Watch.
>> [ OK ] Reached target Paths.
>> Mounting POSIX Message Queue File System...
>> openvswitch: Open vSwitch switching datapath
>> Starting Journal Service...
>> [ OK ] Started Load Kernel Modules.
>> [ OK ] Mounted Huge Pages File System.
>> [ OK ] Started Create list of req… nodes for the current kernel.
>> [ OK ] Started Remount Root and Kernel File Systems.
>> [ OK ] Mounted Temporary Directory (/tmp).
>> [ OK ] Mounted Kernel Debug File System.
>> [ OK ] Mounted POSIX Message Queue File System.
>> Starting Create System Users...
>> Starting Rebuild Hardware Database...
>> Starting Apply Kernel Variables...
>> [FAILED] Failed to start Create System Users.
>> See 'systemctl status systemd-sysusers.service' for details.
>> [ OK ] Started Apply Kernel Variables.
>> Starting Create Static Device Nodes in /dev...
>> [ OK ] Started Journal Service.
>> Starting Flush Journal to Persistent Storage...
>> [ OK ] Started udev Coldplug all Devices.
>> systemd-journald[163]: Received request to flush runtime journal from PID 1
>> [ OK ] Started Flush Journal to Persistent Storage.
>> [ OK ] Started Create Static Device Nodes in /dev.
>> [ OK ] Reached target Local File Systems (Pre).
>> Mounting /var/volatile...
>> [ OK ] Mounted /var/volatile.
>> Starting Load/Save Random Seed...
>> [ OK ] Reached target Local File Systems.
>> Starting Commit a transient machine-id on disk...
>> Starting Create Volatile Files and Directories...
>> [ OK ] Started Load/Save Random Seed.
>> [FAILED] Failed to start Commit a transient machine-id on disk.
>> See 'systemctl status systemd-machine-id-commit.service' for details.
>> [ OK ] Started Create Volatile Files and Directories.
>> Starting Network Time Synchronization...
>> Starting Update UTMP about System Boot/Shutdown...
>> Starting Rebuild Journal Catalog...
>> Starting Run pending postinsts...
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Stopped Network Time Synchronization.
>> Starting Network Time Synchronization...
>> [ OK ] Started Update UTMP about System Boot/Shutdown.
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Stopped Network Time Synchronization.
>> Starting Network Time Synchronization...
>> [FAILED] Failed to start Rebuild Journal Catalog.
>> See 'systemctl status systemd-journal-catalog-update.service' for details.
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Stopped Network Time Synchronization.
>> Starting Network Time Synchronization...
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Stopped Network Time Synchronization.
>> Starting Network Time Synchronization...
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Stopped Network Time Synchronization.
>> [FAILED] Failed to start Network Time Synchronization.
>> See 'systemctl status systemd-timesyncd.service' for details.
>> [ OK ] Reached target System Time Set.
>> [ OK ] Reached target System Time Synchronized.
>> random: crng init done
>> random: 2 urandom warning(s) missed due to ratelimiting
>> [FAILED] Failed to start Run pending postinsts.
>> See 'systemctl status run-postinsts.service' for details.
>> [FAILED] Failed to start Rebuild Hardware Database.
>> See 'systemctl status systemd-hwdb-update.service' for details.
>> Starting Update is Completed...
>> Starting udev Kernel Device Manager...
>> [ OK ] Started Update is Completed.
>> [ OK ] Started udev Kernel Device Manager.
>> [ OK ] Reached target System Initialization.
>> [ OK ] Started Daily rotation of log files.
>> Starting Reboot and dump vmcore via kexec...
>> [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
>> [ OK ] Started Daily Cleanup of Temporary Directories.
>> [ OK ] Reached target Timers.
>> Starting sshd.socket.
>> [ OK ] Listening on RPCbind Server Activation Socket.
>> [ OK ] Listening on D-Bus System Message Bus Socket.
>> Starting Network Service...
>> [ OK ] Listening on sshd.socket.
>> [ OK ] Started Reboot and dump vmcore via kexec.
>> [ OK ] Found device /dev/ttyPS0.
>> [ OK ] Started Network Service.
>> [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
>> Starting Network Name Resolution...
>> [ OK ] Reached target Sockets.
>> [ OK ] Reached target Basic System.
>> Starting Login Service...
>> [ OK ] Started Periodic Command Scheduler.
>> [ OK ] Started Job spooling tools.
>> Starting Telephony service...
>> [ OK ] Started D-Bus System Message Bus.
>> Starting RPC Bind Service...
>> [ OK ] Started Dynamic Host Configuration Protocol (DHCP).
>> Starting System Logging Service...
>> [ OK ] Started Login Service.
>> [ OK ] Started Network Name Resolution.
>> [ OK ] Started System Logging Service.
>> [ OK ] Started RPC Bind Service.
>> [ OK ] Started Telephony service.
>> [ OK ] Reached target Network.
>> Starting Berkeley Internet Name Domain (DNS)...
>> Starting Postfix Mail Transport Agent...
>> Starting /etc/rc.local Compatibility...
>> Starting Permit User Sessions...
>> Starting Target Communication Framework agent...
>> Starting Avahi mDNS/DNS-SD Stack...
>> [ OK ] Started /etc/rc.local Compatibility.
>> [ OK ] Started Permit User Sessions.
>> [ OK ] Started Serial Getty on ttyPS0.
>> [ OK ] Started Getty on tty1.
>> [ OK ] Started Avahi mDNS/DNS-SD Stack.
>> [ OK ] Started Target Communication Framework agent.
>> [FAILED] Failed to start Berkeley Internet Name Domain (DNS).
>> See 'systemctl status named.service' for details.
>> [ OK ] Reached target Host and Network Name Lookups.
>> [ OK ] Started NFS status monitor for NFSv2/3 locking..
>>
>> Wind River Linux development_userspace-next_toolchain-next_linux-yocto-dev 19.27 xilinx-zynqmp ttyPS0
>>
>> xilinx-zynqmp login: root
>> root at xilinx-zynqmp:~# uname -a
>> Linux xilinx-zynqmp 5.2.0-rc7-yoctodev-standard #1 SMP PREEMPT Thu Jul 4 08:14:53 UTC 2019 aarch64 aarch64 aarch64 GNU/Linux
>> root at xilinx-zynqmp:~#
>> --------------log end--------------
>>
>>
>>
>> The following changes since commit be98cd236330422f8e42b2be16644b269b85e022:
>>
>> Merge tag 'v5.2-rc7' into standard/xilinx-zynqmp (2019-07-04 16:02:09 +0800)
>>
>> are available in the Git repository at:
>>
>> https://github.com/wqyoung/linux-yocto-dev.git standard/xilinx-zynqmp
>>
>> for you to fetch changes up to 164beaf46b4472cac1b1bffb77284ac51ba9102f:
>>
>> spi: spi-xilinx: Fixed kernel booting issue when startup block is enabled (2019-07-04 16:34:55 +0800)
>>
>> ----------------------------------------------------------------
>> Alexandru Ardelean (1):
>> serial: uartlite: fix null dereference on probe error path
>>
>> Alexey Brodkin (1):
>> xilinx: Documentation/devicetree - add description for "port-number" property
>>
>> Amit Kumar Mahapatra (5):
>> spi: Fix failures in Zynq and ZynqMP qspi drivers
>> spi: zynqmp-gqspi: Set recommended clock and data tap delay values
>> spi-nor: Added support for ISSI serial NOR Flash Devices
>> mtd: spi-nor: Added support for ISSI Serial NOR Flash
>> spi: spi-xilinx: Fixed kernel booting issue when startup block is enabled
>>
>> Anand Ashok Dumbre (2):
>> documentation: dt: add bindings documentation for Scene Change Detection
>> v4l: xilinx: scd: New Scene Change Detection driver
>>
>> Andrei Simion (1):
>> Xilinx: ARM: Devcfg and SLCR drivers updated to support reconfiguration.
>>
>> Andrey Kartashev (2):
>> net: xilinx: axiethernet: Fix memory leak in axienet bd_free()
>> net: xilinx: axiethernet: Add error output on DMA allocation failed
>>
>> Anurag Kumar Vulisha (75):
>> drivers: ata: Add CCI support for SATA if CCI is enabled
>> devicetree: bindings: Added documentation for xilinx axi Uartlite
>> phy: zynqmp: Add dt bindings for ZynqMP PHY
>> phy: zynqmp: Add phy driver for xilinx zynqmp phy core
>> phy: zynqmp: Clean the logic for fetching usb control registers
>> phy: zynqmp: Export functions for asserting/de-asserting core reset
>> phy: Add Display port and SGMII type PHYs
>> usb: xhci: Add workaround for fixing ep stream ring hang issue
>> usb: uas: Add workaround for DATA IN urb's returned with status -EAGAIN
>> drivers: dwc3: Add U3 suspend disable quirk for silicon versions less than v4
>> drivers: dwc3: Fix cleaning of soc_rev for failure conditions
>> dwc3: dwc3-of-simple: Move ioremap calls into probe
>> dwc3: Add support for setting USB control registers as phy platform data
>> dwc3: core: Enable GUCTL1 chicken bit 10 for fixing crc error after resume bug
>> dwc3: core: Enable GUCTL1 chicken bit 9 for correcting Inter Packet Delay(IPD)
>> usb: dwc3: Correct dwc3 host init code for making SMMU work in HOST Mode
>> usb: Add quirk for enabling workaround for BULK IN streams
>> dwc3: Add support for clock disabling during suspend
>> dwc3: Add support for removing vbus when suspended
>> dwc3: Correct errors when dwc3 loaded as module
>> dwc3: Fix the logic used to get data from parent node
>> usb: dwc3: implement stream transfer timout
>> dwc3: fix the logic for finding parent node
>> dt-bindings: usb: Document snps,refclk_fladj DT property
>> dwc3: Add code for supporting entering into D3 state during suspend
>> usb: xhci-plat: Add remote wakeup support
>> usb: function: f_tcm: Add support for getting alt interface number
>> usb: dwc3: Put usb core in reset after entering D3 state
>> usb: dwc3: don't setup event buffers when operating in device mode
>> usb: dwc3: Fix the logic for allocating and setting scratchpad buffers
>> usb: dwc3: Add hibernation support when operating as gadget
>> usb: dwc3: set susphy bit before entering D3 state
>> usb: dwc3: use udelay instead of usleep to avoid crash when serving wakeup event
>> usb: dwc3: avoid calling usb regs when controller in D3 state
>> usb: dwc3: add support for enabling/disabling hibernation dynamically
>> usb: dwc3: don't return error when phy is not found
>> dt-bindings: usb: dwc3: Add flag for supporting hibernation
>> usb: dwc3: fix the logic for setting GBLHIBERNATIONEN in GCTL
>> usb: xhci: don't clean shared_hcd when otg is enabled
>> usb: gadget: configfs: Add support for setting maximum supported speed
>> usb: dwc3: Fix missing peripheral irq error message
>> usb: dwc3: Fix the broken suspend/resume functionality in dwc3
>> usb: gadget: uvc_video: unlock before submitting a request to ep
>> usb: dwc3: Correct usb dma mask for making SMMU work in device mode
>> usb: xhci: wait for atleast 1ms after exiting U3
>> usb: dwc3: gadget: ISOC transfers should be stopped before starting a transfer
>> usb: storage: uas: Remove unused variable from uas.c
>> dwc3: otg: fix broken OTG HNP feature
>> dwc3: otg: cancel the hnp_polling work before stopping host
>> usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields
>> usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
>> usb: dwc3: gadget: Don't kick transfer if LST or SHORT bits are set
>> usb: dwc3: Add DRD support for versal
>> usb: dwc3: Fix broken CCI feature with dwc3 usb controller
>> usb: dwc3: otg: make otg driver work along with drd driver
>> usb: dwc3: otg: mask host/device soft reset from affecting the phy
>> dt-bindings: usb: Add description for interrupt-names property used
>> usb: dwc3: route lpd usb traffic through CCI path for making SMMU work
>> usb: dwc3: replace arguments in __dwc3_gadget_ep_enable with DWC3_DEPCFG_ACTION_INIT
>> usb: dwc3: otg: Add support for ending HNP session
>> usb: dwc3: otg: Pass dummy address instead of value
>> usb: dwc3: gadget: remove redundant otg checks from dwc3_gadget_init()
>> usb: dwc3: otg: Add dependencies required by otg.c and drd.c files
>> usb: host: xhci: Replace 0/1 values with boolean
>> usb: dwc3: gadget: Add new platform_data.h file
>> usb: dwc3: otg: Update Kconfig and Makefile for enabling OTG
>> usb: dwc3: core: use first_trb_index instead of start_slot
>> usb: host: xhci: Add xhci_hcd to xhci_ring for use in stream_timeout_function
>> usb: dwc3: gadget: get irq number for hibernation interrupts
>> usb: dwc3: gadget: export functions which are needed for hibernation
>> usb: dwc3: simple: remove redundant code in dwc3-of-simple.c
>> usb: dwc3: simple: add runtime suspend/resume support
>> usb: dwc3: gadget: clear DWC3_EP_PENDING_REQUEST flag
>> usb: dwc3: gadget: check for empty started_list after cleaning completed requests
>> usb: dwc3: gadget: do not issue END_TRANSFER if request list is empty
>>
>> Appana Durga Kedareswara rao (15):
>> gpio: gpio-xilinx: Fix unbalanced clock reference count
>> net: can: xilinx_can: Fix flags field initialization for canps
>> net: can: xilinx_can: Fix style issues
>> net: can: xilinx_can: Fix flags field initialization for axi can
>> net: can: xilinx_can: Add cantype parameter in xcan_devtype_data struct
>> net: can: xilinx_can: Add support for CANFD FD frames
>> net: can: xilinx_can: Fix kernel doc warnings
>> net: can: xilinx_can: fix chip_start failure with invalid bus
>> fpga: fpga-mgr: Add readback support
>> firmware: xilinx: Add pm api function for PL readback
>> fpga: fpga-mgr: Add debugfs entry for loading fpga image from user space
>> dt-bindings: fpga: Add binding doc for versal fpga manager
>> fpga: versal-fpga: Add versal fpga manager driver
>> net: can: xilinx_can: Fix FSR register handling in the rx path
>> net: can: xilinx_can: Fix the data updation logic for CANFD FD frames
>>
>> Bharat Kumar Gogada (15):
>> microblaze: pci: Support generic Xilinx AXI PCIe Host Bridge IP driver
>> PCI: XDMA PL PCIe: Adding device tree binding for XDMA PL PCIe
>> PCI: XDMA PL PCIe: Adding XDMA PL PCIe Root Port
>> PCI: XDMA PL PCIe: Request host bridge window resources
>> PCI: XDMA PL PCIe: Convert PCI scan API to pci_scan_root_bus_bridge()
>> PCI: XDMA PL PCIe: Move to struct pci_host_bridge IRQ mapping functions
>> PCI: XDMA PL PCIe: Remove unused platform data
>> PCI: XDMA PL PCIe: Translate INTx range to hwirqs 0-3
>> PCI: XDMA PL PCIe: Fix 64-bit MSI address programming
>> PCI: XDMA PL PCIe: Program hwirq to MSI data
>> PCI: XDMA PL PCIe: Fix number of MSI interrupts supported
>> PCI: XDMA PL PCIe: Fix Multi MSI data programming
>> PCI: XDMA PL PCIe: Add documentation for MSI DECODE mode.
>> PCI: XDMA PL PCIe: Add support MSI DECODE mode
>> PCI: XDMA PL PCIe: Fixing legacy interrupt handling bug
>>
>> Brijesh Singh (1):
>> EDAC: Add ARM64 EDAC
>>
>> Chirag Parekh (5):
>> i2c: cadence: Recover bus after controller reset
>> i2c: cadence: Added slave support
>> staging: clocking-wizard: Add support for dynamic reconfiguration
>> dt-bindings: pinctrl: Add DT binding doc for new pin control driver
>> pinctrl: zynqmp: Add pin controller driver
>>
>> Claus H. Stovgaard (3):
>> net: ethernet: xilinx: Fix xxv mac padding issue - only pad last element.
>> net: ethernet: xilinx: axienet cleanup of tx with no dre
>> net: ethernet: xilinx: only teardown mdio when available
>>
>> Daniel Steger (5):
>> media: xilinx: tpg: Add pixel per clock dt support
>> dt: bindings: media: xilinx: tpg: Add ppc dt bindings.
>> media: xilinx: tpg: v4l subdevice controls to set fps
>> media: xilinx: vtc: Dynamically calculate pixel clock
>> media: xilinx: tpg: dt pixel per clock validate.
>>
>> David Cater (3):
>> dt-bindings: Add binding for IDT 8T49N24x UFT
>> clk: Add ccf driver for IDT 8T49N24x UFT
>> clk: idt: fix ns1_q0 div calc, debugfs i2c func, make structures static
>>
>> Derek Kiernan (2):
>> misc: xilinx-sdfec: Add new version DT binding file
>> misc: xilinx-sdfec: Add overview for SD-FEC driver
>>
>> Devarsh Thakkar (8):
>> dmaengine: xilinx_frmbuf: Add support for XV15 and XV20 contiguous formats
>> dmaengine: xilinx_frmbuf: Mark previous active decriptor as complete in irq handler
>> dmaengine: xilinx_frmbuf: Add API to set framebuffer IP mode
>> v4l: xilinx: dma: Fix v4l2 enumeration callback for multiplanar
>> v4l: xilinx: dma: Add XV15 and XV20 contiguous format support
>> v4l2-core: Update entries for XV15 and XV20 contiguous formats
>> xilinx: v4l: m2m: Terminate the dma engine before releasing buffers
>> xilinx: v4l: m2m: Set default mode for framebuffer IP
>>
>> Dhaval Shah (6):
>> soc: xilinx: vcu: Provided API to get core clock
>> soc: xilinx: vcu: Provided API to get number of cores
>> soc: xilinx: vcu: Divisor calculation for MCU clock is updated.
>> soc: xilinx: vcu: Optimize the VCU PLL calculation.
>> dt-bindings: soc: xilinx: Update VCU bindings for vcu reset pin
>> soc: xilinx: vcu: Update vcu init/reset sequence
>>
>> Durga Challa (3):
>> zynqmp: firmware: provides support to access efuse
>> dt-bindings: nvmem: Added efuse nodes
>> nvmem: zynqmp: Added support to access efuse
>>
>> Fengguang Wu (1):
>> drm: xlnx: pl_disp: fix odd_ptr_err.cocci warnings
>>
>> Filip Drazic (1):
>> usb: dwc3: of-simple: Add missing platform_set_drvdata
>>
>> Glenn Langedock (1):
>> gpio: zynq: protect direction in/out with a spinlock
>>
>> Harini Katakam (19):
>> phy: dp83867: Add support for SGMII
>> phy: dp83867: macb: SW workaround for link instability
>> Documentation: DT: Add bindings documentation for Xilinx PCS/PMA PHY
>> devicetree: Update documentation for USXGMII
>> net: xilinx: axiethernet: Add USXGMII support
>> net: macb: Add PCS caps mask and enable autoneg
>> net: macb: Add support for fixed link
>> net: macb: Reorder probe
>> dt-bindings: net: macb: Add optional property tsu-clk
>> net: macb: TSU clock and PTP fixes
>> net: macb: Add provision for queue tie off
>> net: macb: Add PM support
>> net: macb: Clean up empty lines/spacing
>> net: macb: Increment rx bd head after allocating skb and buffer
>> net: macb: Process tx timestamp only on ptp packets
>> net: macb: Disable macb pad and fcs for fragmented packets
>> net: macb: Add separate definition for PPM fraction
>> net: macb: Fix SUBNS increment and increase resolution
>> net: macb: Optimize reading HW timestamp
>>
>> Holden Sandlar (1):
>> spi: zynqmp-gqspi direct read made word aligned.
>>
>> Hyun Kwon (103):
>> mm: page_alloc: Demote the PFNs busy message to debug
>> uio: Add dma-buf import ioctls
>> dt-bindings: soc: xilinx: Add the dt binding for AI engine
>> uio: Add the UIO driver for AI engine
>> uio: xilinx_ai_engine: Map the dynamic memory as write-combine
>> dt: bindings: sound: Add DT bindings for Xilinx ZynqMP DP audio
>> sound: soc: xilinx: Add ZynqMP DP subsystem audio drivers
>> sound: xilinx: pcm: Set the shorter device name
>> dt-bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA
>> dma: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver
>> dma: xilinx: dpdma: Implement the synchronize callback
>> drm: fourcc: Add drm_format_plane_width_bytes()
>> drm: platform encoder driver support
>> drm: drm_fourcc: Introduce macro-pixel info to drm_format_info
>> drm: drm_fourcc: Add new formats for Xilinx IPs
>> drm: fourcc: Add new formats needed by Xilinx IP
>> uapi: drm: Add AVUY fourcc
>> PCI: Xilinx NWL PCIe: Add a clock specifier in the device tree
>> PCI: xilinx-nwl: Enable the clock through CCF
>> v4l: Add VUY8 24 bits bus format
>> drm: xilinx: Add a Xilinx DRM KMS common header file
>> drm: xilinx: Add a Chroma Resampler driver
>> drm: xilinx: Add an On Screen Display(OSD) Driver
>> drm: xilinx: Add a RGB to YCrCb(RGB2YUV) converter driver
>> drm: xilinx: Add a Video Timing Controller(VTC) driver
>> drm: xilinx: Add a plane support
>> drm: xilinx: Add a connector support
>> drm: xilinx: Add an encoder support
>> drm: xilinx: Add a crtc support
>> drm: xilinx: gem: Add the Xilinx GEM helper
>> drm: xilinx: fb: Add the Xilinx framebuffer helper
>> drm: xilinx: Add a Xilinx DRM KMS driver
>> Documentation: devicetree: drm: xilinx: DisplayPort(dp)
>> drm: xilinx: dp: Add the DisplayPort driver
>> dt: bindings: drm: xilinx: dp_sub: ZynqMP DP subsystem DT bindings
>> drm: xilinx: dp_sub: Add the DP subsystem driver
>> drm: xilinx: Add a Xilinx DRM KMS driver to Makefile/Kconfig
>> media: xilinx: Add Color Filter Array (CFA) driver
>> media: xilinx: Add Chroma Resampler (CRESAMPLE) driver
>> media: xilinx: Add RGB to YUV (RGB2YUV) driver
>> media: xilinx: Add Scaler driver (SCALER) driver
>> media: xilinx: tpg: Block comments
>> media: xilinx: vip: Add the pixel format for RGB24
>> v4l: xilinx: dma: Terminate DMA when stream on fails
>> drm: xilinx: dp: Skip the aux communication when there's no sink
>> drm: xilinx: drv: unref drm device in error path
>> drm: xilinx: drv: Unset the master flag in release wrapper
>> dt: bindings: drm: xilinx: Add SDI phandle
>> drm: xilinx: sdi: Get an SDI instance using phandle
>> drm: xilinx: drv: Make fbdev as optional
>> drm: xlnx: Xilinx DRM KMS driver
>> dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings
>> drm: xlnx: DRM KMS driver for Xilinx ZynqMP DP subsystem display
>> drm: xlnx: DRM KMS driver for Xilinx ZynqMP DisplayPort
>> drm: xlnx: ZynqMP DP subsystem DRM KMS driver
>> drm: xlnx: zynqmp_disp: Add drm properties
>> drm: xlnx: zynqmp_dp: Add drm properties
>> dt-bindings: display: xlnx: Add bridge bindings
>> drm: xlnx: drv: Add Xilinx bridge support
>> drm: xlnx: zynqmp: Add Xlnx bridge support
>> drm: xlnx: zynqmp: Use ZynqMP phy API
>> drm: xlnx: Kconfig: Select dpdma for ZynqMP DP
>> drm: xlnx: bridge: Fix the multiple definition error
>> drm: xlnx: xlnx_drv: Remove the dt binding
>> drm: xlnx: zynqmp: Use xlnx pipeline calls
>> dt-bindings: display: xlnx: zynqmp-dpsub: Update the documentation
>> drm: xlnx: zynqmp: disp: Use the device node for layers
>> drm: xlnx: xlnx_drv: Move xlnx bridge helper initialization
>> dt-bindings: display: xlnx: zynqmp-dpsub: Make layers as child node
>> Revert "drm: xlnx: zynqmp: disp: Use the device node for layers"
>> drm: xlnx: pl_disp: Fix error handling
>> drm: xlnx: pl_disp: Use xlnx pipeline calls
>> drm: xlnx: mixer: Use xlnx pipeline call
>> drm: xlnx: zynqmp: Add XV15 and XV20 formats
>> drm: xlnx: drv: Allow multiple masters on a drm device
>> drm: xilinx: plane: Use drm_format_plane_width_bytes
>> drm: xlnx: zynqmp_dp: Use the correct number of lanes
>> drm: xlnx: drv: Shutdown the drm device properly
>> drm: xlnx: zynqmp: Disable a plane when the fb format changes
>> drm: xlnx: fb: Prefer the current format depth over depth from fb helper
>> drm: xlnx: zynqmp: Update planes asynchronously in the legacy entry
>> drm: xlnx: zynqmp: Don't update the plane for the same fb
>> drm: xlnx: zynqmp_dp: Initialize dpsub without phy
>> drm: xilinx: Add a Video Timing Controller(VTC) driver
>> drm: xilinx: vtc: Remove xilinx_vtc_remove()
>> drm: xilinx: vtc: Fix the kernel-doc warnings
>> drm: xilinx: vtc: Use of_match_node()
>> drm: xilinx: vtc: Return IRQ_NONE for no interrupt
>> drm: xilinx: vtc: Block comments using a trailing */ on a separate line
>> drm: xlnx: zynqmp_dpsub: Support reserved memory
>> drm: xlnx: zynqmp_disp: Modul param for initial format of gfx layer
>> drm: xlnx: zynqmp_disp: Configure the coefficients for TPG
>> drm: xlnx: zynqmp_disp: Add Y only formats support
>> drm: xlnx: zynqmp: Handle the event when there's no fb
>> drm: xlnx: zynqmp: Remove unused variable
>> drm: xlnx: zynqmp_disp: Skip the modeset for same fb
>> uio: xilinx_ai_engine: Set the uio device as pdev driver data
>> uio: xilinx_ai_engine: Unreference correct pdev
>> dt-bindings: soc: xilinx: ai_engine: Add interrupts
>> uio: xilinx_ai_engine: Enable the irq
>> uio: xilinx_ai_engine: Simulate the irq if no hw irq is available
>> dt-bindings: soc: xilinx: ai-engine-npi: Add the binding for AIE NPI
>> uio: xilinx_ai_engine: Enable platform genirq driver
>>
>> Jason Wu (2):
>> dts: Documentation: Add documentation for ZynqMP R5 rproc bindings
>> remoteproc: Add initial zynqmp R5 remoteproc driver
>>
>> Jeffrey Mouroux (7):
>> uapi: media: New fourcc codes needed by Xilinx Video IP
>> dt-bindings: dmaengine: xilinx_frmbuf: Video Framebuffer IP
>> dmaengine: xilinx_frmbuf: New driver for Video Framebuffer IP
>> dmaengine: xilinx_frmbuf: Update Framebuffer Driver with support for new 8-bit/10-bit formats
>> media: xilinx: Ensure Video Framebuffer selected by Kconfig
>> media: xilinx: dma: Enable use of Framebuffer Write IP in V4L2 Driver
>> media: v4l2-core: Update V4L2 framework with new fourcc codes
>>
>> John Linn (3):
>> i2c: cadence: Fixed repeated start not holding the bus long enough
>> irqchip: Add Xilinx Interrupt Controller bindings
>> Xilinx: ARM: MTD: fixing CFI for Numonyx CFI bug
>>
>> Jolly Shah (2):
>> drivers: firmware: xilinx: Add sysfs interface
>> drivers: firmware: Add Pdi load API support
>>
>> Jordan Anderson (1):
>> arm: zynq: pl310_edac_l2: Update header file
>>
>> Joseph Zavodny (1):
>> dt-bindings: dmaengine: xilinx_dma: Fix typo in device tree bindings examples
>>
>> Kalyani Akula (8):
>> crypto: Adds user space interface for ALG_SET_KEY_TYPE
>> zynqmp: firmware: Adds zynqmp-aes support
>> dt-bindings: crypto: zynqmp-aes documentation
>> crypto: zynqmp-aes: Adds zynqmp-aes driver
>> zynqmp: firmware: Adds a driver for loading secure partition from Linux
>> firmware: zynqmp: Modify zynqmp_pm_secure_load to return only dst.
>> firmware: zynqmp-secure: Correct error handling for secure_load
>> zynqmp-secure: Fix for crash seen with secure image loading
>>
>> Kedareswara rao Appana (51):
>> net: emaclite: Fix kernel doc warnings
>> net: emaclite: Fix coding style violations
>> net: ethernet: xilinx: Add support for SGMII and 1000BASE-X phys
>> trafgen: Document sysfs entries
>> dt-bindings: dmaengine: xilinx_dma: Correct binding doc for single dma channel
>> dmaengine: xilinx_dma: Fix dma_get_slave_caps gaps
>> dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor
>> dmaengine: xilinx_dma: Fix issues with vdma mulit fstore configuration
>> dmaengine: xilinx_dma: Add support for memory sg transactions for cdma
>> dma: xilinx: axidmatest: Fix race conditions in the test client
>> Documentation: DT: Add binding documentation for axi emaclite
>> net: ethernet: xilinx: Add Xilinx AXI Ethernet DT Binding Documentation
>> Documentation: DT: Update binding doc for 10G/25G MAC
>> Documentation: DT: Update binding doc for 10G/25G MAC 1588
>> Documentation: DT: Update binding doc for 2.5G MAC
>> ethernet: xilinx: Add NAPI support
>> net: ethernet: xilinx: Convert the driver to use of_get_phy_mode
>> net: ethernet: xilinx: Add support for SGMII and 1000BASE-X phys
>> net: ethernet: xilinx: Use barriers at relevant places
>> net: ethernet: xilinx: Fix lost wake-up scenario in xmit
>> net: ethernet: xilinx: Add support for non-processor mode
>> net: ethernet: xilinx: Add support for config structure
>> net: ethernet: xilinx: Add support for 2.5G MAC
>> ethernet: xilinx: Add support for 10G MAC
>> net: ethernet: xilinx: Add support for 10G/25G MAC
>> net: ethernet: xilinx: Add support for 1588
>> net: ethernet: xilinx: Add support for ZynqMP
>> ethernet: xilinx: Improve Rx error handling
>> net: ethernet: xilinx: Adding highmem support
>> net: ethernet: xilinx: Remove unnecessary phy defines
>> net: ethernet: xilinx: Update link state change properly in the driver
>> net: ethernet: xilinx: Fix issues with the optional phy_type property
>> ethernet: xilinx: Allow unaligned transfers
>> net: ethernet: Use ether_addr_copy()
>> net: ethernet: xilinx: Fix issues with the phy-node
>> net: ethernet: xilinx: Fix coding style issues
>> net: ethernet: Fix issues in the driver when DRE is not enabled in the h/w
>> Documentation: devicetree: axienet: Add clock support
>> net: ethernet: axienet: Add clock support
>> net: ethernet: axienet: Fix bug in the rxreject interrupt handling
>> net: axienet: Fix kernel doc warnings
>> net: axienet: Fix coding style violations
>> net: ethernet: xilinx: Fix ping not working after ifdown and ifup
>> Documentation: DT: Add support for mcdma
>> net: ethernet: xilinx: Add support for mcdma
>> net: ethernet: xilinx: Add support for 1588 in buffered mode
>> net: ethernet: xilinx: Fix race condition in the tx path
>> net: ethernet: xilinx: Fix race in the random queue selection
>> net: ethernet: xilinx: Fix issue tx queues statistics are not getting updated with ethtool
>> net: ethernet: xilinx: update interrupt-names property with ip interupt naming convention
>> net: macb: add support for mdio phy nodes
>>
>> Kieran Bingham (2):
>> uvcvideo: Xilinx: Bump up URBS and MAX_PACKETS
>> uvcvideo: Prevent new URBs being processed at stream stop
>>
>> Kuldeep Dave (2):
>> PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for Microblaze
>> PCI: XDMA PL PCIe: Enable XDMA PL PCIe for Microblaze
>>
>> Laurent Pinchart (28):
>> media: entity: Add has_route entity operation
>> media: entity: Add media_entity_has_route() function
>> v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
>> v4l: Add RGB 8:8:8 media bus format on 24 and 32 bit busses
>> v4l: xilinx: Add Video Remapper driver
>> media: xilinx: Add AXI4 stream switch driver
>> media: xilinx: Add HLS core driver
>> v4l: xilinx: scd: Consolidate register definitions
>> v4l: xilinx: scd: Consolidate structure definitions
>> v4l: xilinx: scd: Make local functions static
>> v4l: xilinx: scd: Reorder structure definitions
>> v4l: xilinx: scd: Merge the V4L2 support in the main SCD driver
>> v4l: xilinx: scd: Merge the main and V4L2 IRQ handlers
>> v4l: xilinx: scd: Merge the DMA support in the main SCD driver
>> v4l: xilinx: scd: Cleanup the DMA engine at remove() time
>> v4l: xilinx: scd: Merge the main and DMA IRQ handlers
>> v4l: xilinx: scd: Compile all SCD source files in a single module
>> v4l: xilinx: scd: Refactor the xscd_device structure
>> v4l: xilinx: scd: Allocate pads array statically
>> v4l: xilinx: scd: Store channel registers address in iomem field
>> v4l: xilinx: scd: Request IRQ after completing initialization
>> v4l: xilinx: scd: Initialize DMA channels in xilinx-scenechange-dma.c
>> v4l: xilinx: scd: Allocate all channels in one go
>> v4l: xilinx: scd: Inline the xscd_dma_alloc_tx_descriptor() function
>> v4l: xilinx: scd: Clean up #include statements
>> v4l: xilinx: scd: Cleanup the xscd_dma_chan structure
>> v4l: xilinx: scd: Rewrite core start/stop and interrupt handling
>> v4l: xilinx: scd: Don't mark channel as disabled in .s_stream(0)
>>
>> Manish Narani (26):
>> edac: zynqmp: Fix incompatible parameter error
>> iio: adc: xilinx: Use devm_ functions while requesting irq
>> sdhci: add support for switching to UHS-I modes on ZynqMP Platform
>> documentation: dt: modify bindings documentation for arasan sdhci
>> zynqmp: sdhci: set host quirk2 for no 1.8V support for 1.0 silicon
>> dt: bindings: Add SD tap value properties details
>> zynqmp: sdhci: Prevent SD driver deferred probe after host init
>> sdhci: arasan: Add runtime PM support
>> sdhci: arasan: Remove quirk for broken base clock
>> sdhci: arasan: Add support to read Tap Delay values from DT
>> dt-bindings: mmc: Document versal-8.9a compatible string
>> sdhci: arasan: Add support to set tap delays for Versal
>> usb: gadget: udc: udc-xilinx: Add identifier to read_fn function arg
>> usb: gadget: udc: udc-xilinx: Resolve compilation warnings
>> usb: gadget: udc-xilinx: Resolve kernel-doc warnings
>> usb: host: ehci-xilinx: modified driver to resolve formatting warnings
>> usb: host: ehci-xilinx: Resolve kernel-doc Warnings
>> usb: host: xhci: plat: add support for otg_set_host() call
>> usb: host: xhci: add support for Light Reset for DWC3 DRD
>> usb: xhci: Set XHCI Light Reset for DWC3_OTG mode
>> usb: dwc3: gadget: add support for OTG in gadget framework
>> usb: dwc3: host: add support for OTG in DWC3 host driver
>> usb: dwc3: host: Assign dwc3 dev archdata to xhci dev
>> usb: dwc3: of-simple: Enable CCI support in dwc3 driver
>> usb: dwc3: core: Enable CCI support in dwc3 core driver
>> dt-bindings: usb: dwc3: update for CCI support for USB
>>
>> Manjukumar Matha (1):
>> mmu_defconfig: Enable devtmps and tmpfs
>>
>> Maruthi Srinivas Bayyavarapu (38):
>> AsoC: xlnx: add platform driver to support SDI audio
>> ASoC: xlnx: add capture component DAI
>> ASoC: xlnx: add playback component DAI
>> ASoC: xlnx: Enable SDI audio build
>> ASoC: xlnx: add PL sound card device creation
>> ASoC: xlnx: add PL sound card support
>> ASoC: xlnx: update SDI audio driver to v2.0
>> ASoC: xlnx: Use graph API instead of phandle
>> ASoC: xlnx: remove SDI Rx AES parsing
>> ASoC: xlnx: Move audio interface node names to driver data
>> ASoC: xlnx: Reset S2MM for next channel status update
>> ASoC: xlnx: support multiple sampling rates for HDMI
>> ASoC: xlnx: support multiple sampling rates for SDI
>> ASoC: xlnx: Disable clock wizard usage in audio driver
>> ASoC: xlnx: add SPDIF sound card support
>> ASoC: xlnx: enable SPDIF build
>> ASoC: xlnx: support multiple instances of sound card
>> ASoC: xlnx: enable multi sample rate support for I2S sound card
>> ASoC: xlnx: enable multi sample rate support for HDMI sound card
>> ASoC: xlnx: enable multi sample rate support for SPDIF sound card
>> dt-bindings: ASoC: xlnx-v-uhdsdi-audio: document sdi audio bindings
>> ASoC: xlnx,i2s: dt-bindings: add reference to audio formatter
>> ASoC: xlnx: add audio support in 4k mode
>> ASoC: xlnx: add multi sample rate support for SDI audio
>> ASoC: xlnx: clear bits before assigning desired value
>> drm: xlnx: sdi: enable audio
>> drm: xlnx: sdi: add video mode hdisplay, flags to the shared data
>> ASoC: xlnx: move mm2s/s2mm configuration to functions
>> dt-bindings: ASoC: xlnx,audio-formatter.txt: update clocks
>> ASoC: xlnx: use clock framework for clocks to audio formatter
>> ASoC: xlnx: change I2S driver data
>> ASoC: xlnx,i2s: dt-bindings: update with I2S clocks
>> ASoC: xlnx: use clock framework for clocks to I2S
>> dt-bindings: ASoC: xlnx,v-uhdsdi-audio.txt: update input clocks
>> ASoC: xlnx: use clock framework for clocks to SDI audio
>> dt-bindings: ASoC: xlnx,spdif: update input clocks
>> ASoC: xlnx: change HDMI audio mclk
>> ASoC: xlnx: revert HDMI audio mclk mutliplier
>>
>> Matthieu CASTET (1):
>> mtd: nand: onfi don't WARN if we are in 16 bits mode
>>
>> Maulik Jodhani (2):
>> dt-bindings: net: macb: update for partial store and forward
>> net: macb: Add support for partial store and forward
>>
>> Michal Simek (79):
>> tty: serial: of_serial: Do not allocate greater space than required
>> serial: uartlite: Fix compilation issue on !OF platforms
>> serial: uartlite: Remove additional empty line
>> microblaze: Enable SPARSE_IRQ
>> microblaze: Permit pcibios_set_master override
>> hvc: dcc: Add earlycon support
>> watchdog: cadence: Do not show error in case of deferred probe
>> devicetree: ARM: zynq: Add DT binding for eFuse controller
>> ARM: zynq: Add support for Zynq-7000S devices
>> zynq: slcr: Introduce new get_ocm_config()
>> zynq: Add OCM driver
>> arm: zynq: Suspend support
>> zynq: SMP crashkernel support
>> Bluetooth: hci_ll: Extend timeout between start and communication
>> gpio: xilinx: Use xilinx tested gpio driver
>> i2c: cadence: Fix wording in i2c-cadence driver
>> staging: dt-bindings: Add doc about APF
>> net: ll_temac: Move frag loading to frag loop
>> net: xilinx: Show csum in bootlog
>> net: ll_temac: Fix mdio initialization
>> net: emaclite: Fix arm64 compilation warnings
>> net: phy: dp83867: Enable automatic crossover mode
>> sound: soc: xilinx: Remove empty xilinx_dp_remove()
>> sound: soc: xilinx: Remove empty xilinx_dp_pcm_dev_remove()
>> devicetree: udc-xilinx: Fix coding style in binding doc
>> iio: adc: Enable XADC driver for ZynqMP
>> Revert "dmaengine: remove DMA_SG as it is dead code in kernel"
>> dt-bindings: dmaengine: xilinx_dma: Use generic register description
>> dma: xilinx: Add axidmatest test client code
>> dt-binding: Add binding for axi-dma
>> dt-binding: Add binding for vdmatest client
>> dma: xilinx: Add vdmatest test client code
>> dt-binding: Add binding for axi-cdma
>> dma: xilinx: Add cdmatest test client code
>> net: xilinx: Enable emaclite and axi emac for ZynqMP
>> net: xilinx: Init mdio_mcreg variable
>> net: macb: Initialize bool to false instead of zero
>> reset: Remove additional empty line from Makefile
>> firmware: zynqmp: Fix chip-id kerneldoc format
>> soc: xilinx: vcu: Add exported functions
>> dt-bindings: soc: xilinx: Update vcu compatible string in example
>> clk: zynqmp: Use tab for indentation as is used for others
>> irqchip: gic: Add remoteproc changes to the driver
>> arm: Add support for dynamic IPI allocation
>> firmware: zynqmp: Add pinctrl interface
>> firmware: zynqmp: Add sysfs interface
>> firmware: zynqmp: Add pm_config_reg_access firmware call
>> firmware: zynqmp: Fix macro indentation
>> firmware: zynqmp: Add MMIO read/write api ID
>> firmware: zynqmp: Add comments about ioctls and api_ids
>> firmware: zynqmp: Add missing debug firmware interfaces
>> fpga: fpga-bridge: Add manual set option via sysfs
>> fpga: fpga-mgr: Add firmware store function
>> firmware: zynqmp: Add AFI ioctrl support
>> firmware: zynqmp: Add support for secure_image
>> firmware: zynqmp: Add ULPI reset support
>> firmware: zynqmp: Add zynqmp SGMII firmware support
>> spi: zynq-qspi: Add driver for zynq qspi
>> spi: zynqmp-gqspi: Read num-cs from DT
>> mtd: spi-nor: Added dual parallel and stacked support
>> firmware: zynqmp: Add qspi firmware interface
>> remoteproc: Add support for AMP on Zynq platform
>> firmware: zynqmp: Add firmware support for remoteproc
>> mtd: rawnand: pl353: Add basic driver for arm pl353 smc nand interface
>> devicetree: Update binding for pinctrl in arasan SD driver
>> mmc: arasan: Add pinctrl support to the driver
>> dt-bindings: zynqmp-power: Add optional mbox support
>> media: xilinx: Improve pipeline management code
>> v4l: xilinx: sdirxss: Remove useless semicolon
>> media: platform: xilinx: Fix Kconfig indentation
>> xilinx: v4l: xilinx: Fix order in Makefile
>> hwmon: pmbus: Add DT wiring for ti,tps544b25
>> MAINTAINERS: Updates entries to cover Xilinx drivers
>> ARM: zynq: Add/Update/Sync DTs for xilinx platforms
>> arm64: zynqmp: Add/Update/Sync DTs for xilinx platforms
>> microblaze: Sync defconfigs
>> arm64: xilinx: Add defconfig fragments
>> ARM: xilinx: Add zynq defconfig
>> arm64: zynqmp: Rename zc1285 to zcu1285
>>
>> Mubin Sayyed (1):
>> irqchip: xilinx: Add support for multiple instances
>>
>> Murali Karicheri (1):
>> net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
>>
>> Naga Sureshkumar Relli (25):
>> edac: zynqmp: Add device tree bindings for ZynqMP OCM Controller
>> edac: zynqmp: Add EDAC support for ZynqMP OCM Controller
>> edac: Update device tree bindings for cortex_arm64
>> edac: Add documentation for cortexa53 edac sysfs
>> edac: Add sysfs entries for cortex arm64
>> arm64: zynqmp: Change Kconfig dependency for cortexa53 edac
>> Documentation: Add device tree bindings for xilinx axi tft
>> mtd: spi-nor: Disable 4-Byte addressing for axi_quad_spi
>> mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
>> devicetree: bindings: spi: update device tree for IO mode support
>> devicetree: spi: update zynqmp qspi configuration modes
>> spi: zynqmp: Add support for 44-bit address space on AXI in DMA mode
>> spi: zynqmp: Don't change spi clock frequency for every transfer
>> spi: zynqmp: Add tapdelay support
>> spi: zynqmp: Update driver to support both IO and dma modes
>> spi: zynqmp: Fix kerneldoc warnings
>> spi: zynqmp: fix style issues from checkpatch
>> spi: zynqmp: Fix sparse warning in driver
>> spi: xilinx: fix style issues from checkpatch
>> spi: zynqmp: Fix for qspi dma when accessing address space beyond 32-bit
>> mtd: rawnand: arasan: Add support for writes with out WAITRDY instruction
>> mtd: rawnand: Add an option to get sdr timing mode number
>> dt-bindings: mtd: arasan: Add device tree binding documentation
>> ARM: dts: zynq: update smcc properties
>> mtd: rawnand: pl353: Allow raw read/write only for on-die ecc flash parts
>>
>> Nava kishore Manne (17):
>> serial: xilinx_uartps: Fix warnings in the driver
>> gpio: gpio-zynq: shift zynq_gpio_init() to subsys_initcall level
>> gpio: Fix the Dual Channel gpio driver removal issue
>> i2c: cadence: Handling Slave monitor mode
>> i2c: Re-order the interrupt enable sequence in the i2c send and raceive paths
>> nvmem: zynqmp: Added zynqmp nvmem get_silicon_version()
>> soc: zynqmp: Added pm api functions for RSA and SHA
>> dt-bindings: crypto: Added binding docs for Xilinx ZynqMP SHA3 H/W accelerator
>> crypto: zynqmp-sha: Adopted SHA3 support for ZynqMP Soc
>> dt-bindings: crypto: Added binding docs for Xilinx ZynqMP RSA H/W accelerator
>> crypto: zynqmp-rsa: Adopted RSA support for ZynqMP SoC
>> fpga: fpga-mgr: Adopted Encrypted BitStream loading support for Xilinx zynqmp.
>> dt-bindings: fpga: Extend zynqmp binding with clock support
>> fpga: zynqmp: Extend Xilinx zynqmp manager
>> dt-bindindgs: fpga: Add doc for the zynq afi config driver
>> fpga: zynq: Add AFI config driver
>> fpga: zynqmp-fpga: Fix broken secure bitstream loading use cases
>>
>> Naveen Mamindlapalli (1):
>> dmatest: Fixed alignment issue with PL330 DMA driver for Zynq.
>>
>> P L Sai Krishna (7):
>> mtd: Added dummy entry in the spi_transfer structure
>> spi: zynqmp: gqspi: Added separate dummy entry.
>> mmc: host: Added DT support to use SDIO in standard speed.
>> mmc: Modified the SD standard speed to 19MHz
>> mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
>> mmc: sdhci-of-arasan: Added support for ZynqMP
>> Documentation: mmc: Updated the binding doc for Arasan SDHCI.
>>
>> Pantelis Antoniou (2):
>> of: changesets: Introduce changeset helper methods
>> OF: DT-Overlay configfs interface (v7)
>>
>> Priyadarshini Babu (24):
>> drivers: net: ethernet: TSN QBV- Map ST Gate State value
>> drivers: net: ethernet: TSN - Add new module Frame Preemption
>> drivers: net: ethernet: TSN - Add ioctl support for Frame Preemption
>> drivers: net: ethernet: TSN - Clear QBV ACLL bits before write.
>> drivers: net: ethernet: TSN - Removed num_q variable used for TSN
>> drivers: net: ethernet: TSN - Corrected default num queue value
>> drivers: net: ethernet: TSN - ptp4l hogs CPU time
>> drivers: net: ethernet: TSN - Add QBV get schedule support
>> drivers: net: ethernet: TSN - Handle qbv get schedule when qbv is disabled
>> drivers: net: ethernet: TSN - Add module header file
>> drivers: net: ethernet: TSN - Add copy-to-user size fix
>> drivers: net: ethernet: TSN - Add qbv 256 entries support
>> drivers: net: ethernet: TSN - Add support in tsn ptp to count tx and rx packets
>> net: xilinx: axiethernet: Correct dma name buffer size
>> net: xilinx: axiethernet: Correct skb free function
>> net: xilinx: axiethernet: Split AXIDMA implementation in separate file
>> net: xilinx: axiethernet: Split AXIMCDMA implementation in separate file
>> net: xilinx: axiethernet: In axienet_skb_tstsmp() correct return NETDEV_TX_BUSY on failure
>> dt-bindings: net: TSN: Add num-tc property for TSN Traffic classes
>> net: ethernet: TSN: Add num_tc variable to denote TSN Traffic class
>> net: xilinx: axiethernet: Have separate num_queues for tx and rx queues
>> net: xilinx: axiethernet: Reordered ethtool status to print all Tx & Rx stats
>> net: xilinx: axiethernet: Refactor mcdma_tx/rx_probes
>> net: xilinx: axiethernet: Move axienet_bd_free() to xilinx_axienet_dma.c
>>
>> Punnaiah Choudary Kalluri (2):
>> edac: add support for ARM PL310 L2 cache parity
>> mtd: rawnand: Fix oob write operation failures in ddr mode
>>
>> Radhey Shyam Pandey (46):
>> net: emaclite: Fix line over 80 characters
>> net: emaclite: Balance braces in else statement
>> net: emaclite: Add 'maxlen' description
>> dt-bindings: dmaengine: xilinx_dma: Add axi-dma buffer length property
>> dt-bindings: dmaengine: xilinx_dma: In axidma add support for 64MB data transfer
>> dmaengine: xilinx_dma: Program hardware supported buffer length
>> dmaengine: xilinx_dma: Minor refactoring
>> dmaengine: xilinx_dma: Reset DMA channel in dma_terminate_all
>> dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
>> net: xilinx: axiethernet: Fix compiler warning
>> net: xilinx: axiethernet: Fix compiler warnings
>> net: xilinx: axiethernet: Format XXV MAC error output
>> dt-bindings: net: xilinx_axienet: Sync DT bindings
>> net: xilinx: Sync kconfig description
>> net: xilinx: axiethernet: Fix netconsole implementation
>> net: xilinx: axiethernet: use channel-id for mcdma interrupt names
>> net: xilinx: axiethernet: Fix kernel crash on MII ioctl
>> dt-bindings: net: xilinx_axienet: Align clock-names with IP naming
>> net: xilinx: axiethernet: Extend clocking support
>> dt-bindings: net: xilinx_axienet: Add DMA address width property
>> net: xilinx: axiethernet: Add 64-bit support
>> net: xilinx: axiethernet: Use %pa format specifier for phys_addr_t type
>> dt-bindings: net: xilinx_axienet: Correct "xlnx,include-dre" binding description
>> net: xilinx: axiethernet: Fix code checker warnings
>> net: xilinx: axiethernet: Check for queue full in transmit path
>> net: xilinx: axiethernet: Increase TX and RX BD count
>> net: xilinx: axiethernet: Fix axiethernet register description
>> media: xilinx: Integrate TPG v7 support
>> media: xilinx: Use xvip_write to update background pattern
>> media: xilinx: Add "Pseudorandom" pattern support
>> media: xilinx: Make use of MEDIA_BUS_FMT definitions
>> media: xilinx: Skip checking bayer phase
>> media: xilinx: Use GPIO to assert TPG reset
>> media: xilinx: Fix TPG incorrect pattern on resolution switch
>> media: xilinx: Fix "maybe used uninitialized" warning
>> media: xilinx: Refactor VTC configuration code
>> v4l: xilinx: dma: Remove colorspace check in xvip_dma_verify_format
>> drivers: media: Customized adv7511 for Xylon LogiCVC (deprecated)
>> dt: bindings: media: xilinx: Remove unimplemented TPG compatible string
>> dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
>> dt-bindings: dmaengine: xilinx_dma: Remove axidma multichannel support
>> dmaengine: xilinx_dma: Remove axidma multichannel mode support
>> dt-bindings: phy: dp83867: Add documentation for SGMII 6-wire mode
>> net: phy: dp83867: Add support for 6-wire mode in SGMII configuration
>> net: xilinx: axiethernet: Fix crash in ifconfig down
>> Revert "net: xilinx: axiethernet: Increase TX and RX BD count"
>>
>> Rajan Vaja (18):
>> clk: clk-fixed-factor: Use new macro CLK_OF_DECLARE_DRIVER
>> clk: zynqmp: Extend driver for versal
>> clk: zynqmp: Add support for custom type flags
>> clk: zynqmp: Correct bit index for divider flag
>> dt-bindings: soc: xilinx: Update VCU bindings
>> soc: xilinx: vcu: Move structure definition to header file
>> soc: xilinx: vcu: Add VCU MFD core driver
>> soc: xilinx: vcu: Use CCF to use clocks
>> dt-bindings: firmware: xilinx: Add versal compatible
>> dt-bindings: clock: Add bindings for versal clock driver
>> dt-bindings: power: Add versal power domain bindings
>> drivers: soc: xilinx: Add support to use IPI mailbox
>> firmware: zynqmp: Add sysfs to set shutdown scope
>> firmware: zynqmp: Add sysfs and IOCTL to set boot health status
>> firmware: zynqmp: Extend driver for versal
>> clk: zynqmp: Fix divider calculation
>> clk: zynqmp: Warn user if clock user are more than allowed
>> dt-bindings: power: Add versal power domain bindings
>>
>> Rajnikant Bhojani (11):
>> devicetree: Add Xilinx AMS binding documentation
>> iio: adc: Add Xilinx AMS driver
>> uas: Add US_FL_NO_ATA_1X for linux tcm_usb_gadget
>> usb: gadget: f_tcm: remove code duplication
>> usb: gadget: f_tcm: adjust write length with max packet size
>> usb: gadget: f_tcm: comp_descriptor workaround during SS gadget
>> usb: gadget: f_tcm: queue multiple commands request
>> usb: gadget: f_tcm: add TARGET_SCF_ACK_KREF flag in BOT
>> usb: gadget: f_tcm: support to set maxburst through configfs
>> usb: dwc3: write stream id in depcmd
>> usb: dwc3: enable transfer complete event for stream endpoint
>>
>> Ranjit Waghmode (4):
>> DT: iio: xadc: Add bindings for ultrascale sysmon
>> iio: xadc: add support for ultrascale sysmon
>> iio: xadc: fix for extended name remains same issue
>> mtd: spi-nor: reset EAR to 0 on reboot/shutdown
>>
>> Ravali Potineni (5):
>> net: ethernet: TSN: Add PTP onestep mode support
>> net: ethernet: TSN: Remove XILINX_AXI_EMAC_HWTSTAMP config dependency from XILINX_TSN_PTP
>> dt-bindings: net: TSN: Add TSN device-tree properties in ep and switch
>> dt-bindings: net: TSN: Bind TSN IP with new compatible property
>> net: ethernet: TSN: Change PTP timer interrupt name
>>
>> Ravi Patel (1):
>> drivers: firmware: xilinx: Add support for feature check
>>
>> Ravi Shankar Jonnalagadda (6):
>> PCI: ZYNQMP EP driver: Adding support for ZynqMP ep driver
>> PCI: ZYNQMP EP client driver: Adding support for ZynqMP dma test client
>> PCI: ZYNQMP PS PCIe Driver: Root DMA dt bindings
>> PCI: ZYNQMP EP driver: Adding Root DMA support
>> PCI: Xilinx NWL: Enabling Root DMA
>> PCI: Xilinx NWL: Correcting styling errors
>>
>> Rohit Athavale (25):
>> misc: xilinx-sdfec: initial driver support for xilinx sdfec
>> v4l: xilinx-dma: Update xvip_dma_init routine to allow for probe defer
>> documentation: dt: add bindings documentation for xilinx video demosaic driver
>> v4l: xilinx-demosaic: driver support for xilinx video demosaic
>> documentation: dt: add bindings documentation for vpss scaler
>> v4l: xilinx-vpss-scaler: driver support for xilinx vpss scaler
>> documentation: dt: add bindings documentation for gamma lut ip
>> v4l: xilinx-gamma: initial driver support for xilinx video gamma lut ip
>> Documentation: DT: Add bindings documentation for VPSS CSC
>> v4l: xilinx-vpss-csc: driver support for xilinx vpss csc
>> media: xilinx-vpss-scaler: Zero out H-phase array before changing resolution
>> media: Add new dt-bindings/vf_codes for supported formats
>> media-bus: uapi: Add YCrCb 420 media bus format
>> v4l: xilinx: dma: Update video format descriptor
>> v4l: xilinx-vpss-scaler: Add YUV 420 to VPSS Scaler Driver
>> v4l: xilinx-demosaic: Remove Output Video format register
>> v4l: xilinx-gamma: Add 10-bit IP support for Video Gammma IP.
>> v4l: xilinx-gamma: Add kernel-doc for xgamma_dev struct
>> v4l: xilinx-gamma: Fix compile error in debug mode
>> Documentation: media: Correct dt-bindings doc for Gamma LUT IP
>> Documentation: media: Update dt-bindings doc for 10-bit color depth in vpss-csc
>> v4l: xilinx-vpss-csc: Support for any-to-any color space converison
>> v4l: xilinx-tpg: Add YUV 420 media bus format support to TPG driver
>> dt-bindings: display: xlnx: mixer: Add supported formats table
>> dt-bindings: display: xlnx: mixer: Update example to fix format strings
>>
>> Rohit Visavalia (1):
>> drm: xlnx: zynqmp_dp: Fix DP aux related issues
>>
>> S Mohan (1):
>> apf: Add kernel modules to the kernel
>>
>> Sai Krishna Potthuri (6):
>> iio: adc: Fix checkpatch warning
>> soc: zynqmp: Add mmc tap delay programming
>> dt-binding: mmc: sdhci-of-arasan: Add compatible string for ZynqMP SoC
>> mmc: sdhci-of-arasan: Added workaround for auto tuning.
>> dt-bindings: Added optional property xlnx,startup-block
>> spi: spi-xilinx: Added workaround when startup block is enabled
>>
>> Sai Pavan Boddu (1):
>> gpio: gpio-xilinx: consider -ve return values from of_irq_to_resource
>>
>> Sam Bobrowicz (7):
>> xilinx: v4l: dma: Invoke s_power function of subdevice
>> media: ov5640: calculate PLL settings for modes
>> media: ov5640: set DPHY timing registers
>> media: ov5640: fix get_light_freq on auto
>> media: ov5640: Don't access ctrl regs when off
>> media: ov5640: Add additional media bus formats
>> media: xilinx: csi2rxss: store format size
>>
>> Sandeep Dhanvada (8):
>> staging: xlnx_ernic: Add MAINTAINERS file
>> staging: dt: bindings: ernic: Add initial bindings
>> staging: xlnx_ernic: Add ernic header files
>> staging: xlnx_ernic: Add communication management support
>> staging: xlnx_ernic: Add memory registration APIs for ernic driver.
>> staging: xlnx_ernic: Add queue pair implementation
>> staging: xlnx_ernic: Add ernic configuration driver
>> staging: xlnx_ernic: Add example driver which works with ernic driver.
>>
>> Satish Kumar Nagireddy (58):
>> drm: Add new flags for interlaced alternate fields
>> media: Add documentation for YUV420 bus format
>> drm: xilinx: drv: Use correct format specifier for size_t
>> v4l: xilinx: dma: Add multi-planar support
>> v4l: xilinx: dma: Add scaling and padding factor functions
>> v4l: xilinx: dma: Get scaling and padding factor to calculate DMA params
>> v4l: xilinx: dma: Fix sizeimage calculation
>> v4l: xilinx: dma: Handle 10 bit format calucations for XV20
>> v4l: xilinx: dma: Fix bytes per line calculation
>> drm: xilinx: dp_sub: Add 10 bit YUV formats
>> v4l: xilinx: dma: Return from mplane handling for enum formats
>> xilinx: v4l2: dma: Bug fix in single plane support
>> xilinx: v4l2: dma: Add multiple output support
>> xilinx: v4l: dma: Multi-threading issue
>> drm: xlnx: mixer: Fix bug in programming 64-bit address
>> xilinx: v4l: dma: Fix bug in calculating interlaced height
>> xilinx: v4l: dma: Add ioctl operations for v4l2 output device
>> xilinx: v4l: dma: Add DMA input direction support
>> xilinx: v4l: dma: Add format enumeration for output
>> v4l: xilinx: scd: Add v4l2 custom events
>> dt: bindings: media: xilinx: Documentation for mem2mem driver
>> xilinx: v4l: mem2mem: Initial version of driver
>> v4l: dma: Use media graph traversal to stream on/off subdevs
>> drm: fb: Modify check to ensure correctness of flags
>> drm: xlnx: pl_disp: Pass interlaced field info to frmbuf DMA
>> xilinx: v4l: dma: Remove unused function definition
>> xilinx: v4l: vipp: Avoid decrementing refcount of a node twice
>> documentation: dt: Add bindings documentation for Streaming SCD
>> xilinx: v4l: scd: Initial version of streaming based driver
>> xilinx: v4l: scd: Validate interrupt number
>> xilinx: v4l: scd: Implement generic event notification
>> dma: xilinx: Define early callback modes
>> dma: xilinx: Support early callback modes
>> drm: xlnx: pl_disp: Pass early callback mode
>> dma: xilinx: Release buffers before DMA transfer
>> v4l: xilinx: dma: Add control for low latency
>> v4l: xilinx: dma: Add s_ctrl ioctl for low latency capture
>> media: v4l: Add YUV 12bit and 16bit media bus formats
>> media: v4l2-ioctl: Add YUV 12bit and 16bit pixel formats
>> v4l: xilinx: dma: Add YUV 12bit and 16bit format support
>> v4l: xilinx: scd: Fix video format configuration for YUV420
>> media: v4l: Add YUV 10bit media bus format
>> v4l: xilinx: vip: Add YUV 10bit media bus formats
>> v4l: xilinx: vip: Add scaling and padding factor for XY10
>> v4l: xilinx: vip: Use correct media bus code for RGB 10bit format
>> v4l: xilinx: vpss-scaler: Use 10bit media bus codes
>> v4l: xilinx: tpg: Use 10bit media bus codes
>> v4l: xilinx: vpss-csc: Use 10bit media bus codes
>> v4l: xilinx: scd: Enable 10 bit formats support for memory based IP
>> v4l: xilinx: scd: Use correct threshold value
>> v4l: xilinx: m2m: Add S_SELECTION and G_SELECTION ioctls
>> v4l: xilinx: m2m: Use crop parameters set on output port
>> media: v4l2-ioctl: Use correct fourcc for YUV444 10bit format
>> v4l: xilinx: vip: Fix stride calculation
>> media: v4l: Add YUV444 12bit and 16bit media bus format
>> media: v4l2-ioctl: Add YUV444 12bit and 16bit pixel formats
>> v4l: xilinx: vip: Add YUV444 12bit and 16bit formats
>> v4l: xilinx: m2m: Fix buftype for s_selection ioctl
>>
>> Saurabh Sengar (77):
>> staging: xlnx_ctrl_driver: xilinx framebuffer control driver
>> staging: xlnx_ctrl_driver: Xilinx vpss control driver
>> staging: xlnx_ctrl_driver: Add MAINTAINERS
>> dmaengine: xilinx_dma: making dma state as idle on terminating all
>> drivers: net: ethernet: axienet: fix compilation error
>> drivers: net: ethernet: axienet: added multique DMA support
>> Documentation: devicetree: TSN-switch: TSN Switch device tree documentation
>> drivers: net: ethernet: TSN-switch driver initial check-in
>> drivers: net: ethernet: TSN-switch: QCI module
>> drivers: net: ethernet: TSN PTP module
>> drivers: net: ethernet: TSN QBV module
>> Documentation: devicetree: TSN IP core driver devicetree binding
>> drivers: net: ethernet: axienet: TSN IP driver: Initial Check-In
>> drivers: net: ethernet: TSN: Kconfig and Makefile
>> drivers: net: ethernet: TSN: Modifing CB offsets
>> drivers: net: ethernet: TSN: Adding TSN switch CB APIs
>> drivers: net: ethernet: TSN: Kconfig and Makefile
>> drivers: net: ethernet: axienet: correcting the parsing of device tree for axienet
>> net: ethernet: xilinx: Disabling TEMAC2 data path
>> net: ethernet: Correcting the offset for EP register in tsn shaper
>> Documentation: devicetree: TSN Endpoint device tree documentation
>> drivers: net: ethernet: TSN End point driver
>> drivers: net: ethernet: TSN endpoint addition in Makefile
>> Documentation: devicetree: net: Modify compatible string for TSN switch
>> drivers: net: ethernet: Modify compatible string for TSN switch
>> Documentation: devicetree: Adding num-queue parameter for TSN IP
>> drivers: net: ethernet: xilinx: Adding num queue support for TSN IP
>> dt: bindings: drm: xilinx: Help for Xilinx UHDSDI Tx driver
>> drm: xilinx: sdi: DRM driver for UHDSDI Tx subsystem
>> drm: xilinx: Kconfig: Correcting the SDi flag description
>> drm: xilinx: sdi: correcting st352 value for 3GB
>> drm: xilinx: sdi: Adding 3G-B support in drm SDI driver
>> drm: xilinx: vtc: adding interlaced support
>> drm: xilinx: crtc: Passing signal polarity values to vtc
>> drm: xilinx: sdi: Passing signal polarity values to vtc
>> drm: xilinx: vtc: removing hard coded values for signal polarity
>> drm: xilinx: sdi: omnitek box modes
>> drm: xilinx: sdi: adding psf mode support
>> drm: xilinx: vtc: exporting interrupt APIs
>> drm: xilinx: sdi: adding vblank support
>> drm: xilinx: crtc: Adding sdi vblank support in xlnx crtc
>> dt-bindings: display: xlnx: Adding dsi bindings
>> drm: xlnx: dsi: Adding dsi driver to new framework
>> drm: xlnx: adding cursor width / height support
>> dt-bindings: display: xlnx: Adding mixer bindings
>> drm: xlnx: mixer: Initial video mixer driver
>> dt-bindings: display: xlnx: Adding sdi bindings
>> drm: xlnx: sdi: Adding sdi-tx driver
>> dt-bindings: display: xlnx: Adding pl_disp bindings
>> drm: xlnx: DRM KMS driver for xilinx display pipeline
>> drm: xlnx: pl_disp: Adding multiple color format in single plane
>> drm: xlnx: pl_disp: Removing XLNX_DMA_MAX_CHAN macro
>> drm: xlnx: mixer: logo layer fix
>> drm: xlnx: mixer: Removing dead code
>> drm: xlnx: mixer: Correcting the cursor width and height
>> drm: xlnx: correcting data type for cursor with and height
>> drm: xlnx: pl_disp: Adding semi planar support
>> dt-bindings: display: xlnx: Modifing mixer compatible string
>> drm: xlnx: mixer: Adding mixer 3.0 IP support
>> drm: xlnx: mixer: Adding 10 bit color support
>> drm: xlnx: mixer: Adding more colors in supported list
>> drm: xlnx: mixer: Correcting loop termination condition
>> drm: xlnx: mixer: Fixing wrong stride alignment
>> drm: xlnx: sdi: Adding yuv 420 support
>> drm: xlnx: mixer: remove deprecated dmaengine_terminate_all
>> drm: xlnx: mixer: reset the mixer IP before programming
>> bindings: display: xlnx: Fixing device tree documentation
>> dt-bindings: display: xlnx: mixer: Added xlnx,num-layers description
>> drm: xlnx: mixer: making logo layer optional
>> drm: xlnx: mixer: Added the atomic check for invalid coordinates
>> dt-bindings: display: xlnx: mixer: Adding xlnx,layer-primary property
>> drm: xilinx: vtc: adding interlaced support
>> drm: xilinx: vtc: removing hard coded values for signal polarity
>> drm: xilinx: vtc: exporting interrupt APIs
>> drm: xlnx: zynqmp_disp: Fixing potential segmentation fault
>> xilinx: v4l: dma: In case of error xvip_pipeline_start_stop should return gracefully
>> dt-bindings: display: xlnx: Add device tree binding for xlnx control drivers
>>
>> Shakti Bhatnagar (2):
>> mtd: Expand the ecc placement locations to 1260
>> mtd: rawnand: Add driver for Arasan Nand Controller
>>
>> Shikhar Mishra (1):
>> clk: si5324: Correct SI5324_OUT_REGS macro value
>>
>> Shubhrajyoti Datta (41):
>> serial-uartlite: Change logic how console_port is setup
>> serial-uartlite: Use allocated structure instead of static ones
>> serial-uartlite: Remove ULITE_NR_PORTS macro
>> serial-uartlite: Remove SERIAL_UARTLITE_NR_UARTS
>> serial: uartps: Fix the ignore_status
>> uio: apm: Add device tree bindings
>> dt-bindings: gpio: Add binding for Versal gpio
>> gpio: zynq: Add Versal support
>> dt-bindings: gpio: xilinx: Update binding to reflect changes
>> gpio: xilinx: Add support for no initialisation at probe
>> gpio: zynq: Fix the check for rising edge
>> gpio: xilinx: Add clock handling in remove code
>> i2c: xiic: Fix the clocking across bind unbind
>> i2c: xiic: Fix kerneldoc warnings
>> i2c: xiic: Add timeout to the rx fifo wait loop
>> i2c: cadence: Implement save restore
>> i2c: cadence: Fix the driver in interrupt flurry case
>> tty: uartlite: Update the clock name
>> Documentation: bindings: Add bindings for xilinx fclk
>> staging: fclk: Enable pl clock
>> staging: clocking-wizard: Update the dt binding documentation
>> staging: clocking wizard: Fix kernel-doc warning
>> staging: clocking-wizard: Add support for fractional support
>> staging: Fix the documentation for clocking wizard
>> Documentation: binding: Add documentation for jesd204b
>> misc: jesd204b: Add driver for Xilinx jesd204b
>> Documentation: bindings: Add bindings for JESD phy
>> misc: jesd204b driver support
>> doc: binding: Add clock support
>> usb: gadget: udc-xilinx: Add clock support
>> usb: xilinx: Add suspend resume support
>> clk: zynqmp: Add check for no of users for vpll
>> fpga: region: Add reset support to the fpga region
>> dt-bindings: fpga: Add doc for the xilinx afi config driver
>> fpga: Add xilinx AFI config driver
>> spi: zynqmp: Add support for context loss
>> spi: zynqmp: Add runtime support
>> spi: zynqmp: Cut the clocks after restore
>> spi: zynqmp: Add support for runtime idle
>> staging: fclk: Add sysfs entry for set_rate
>> gpio: zynq: Disable the irq if it is not a wakeup source
>>
>> Siva Durga Prasad Paladugu (1):
>> microblaze: Increase max dtb size to 64K from 32K
>>
>> Siva Rajesh (4):
>> drm: panel: Added timing for AUO B101UAN01 display panel
>> dt: bindings: drm: xilinx: Help for Xilinx MIPI DSI2 Tx subsystem drivers
>> drm: mipi: Bring DT format description closer to the hardware
>> drm: xilinx: mipi: DRM/KMS driver for MIPI DSI2 Tx subsystem
>>
>> Soren Brinkmann (1):
>> ARM: zynq: Fix prefetch option
>>
>> Srikanth Thokala (1):
>> trafgen: xilinx: add axi traffic generator driver
>>
>> Srinivas Goud (9):
>> rtc: xilinx: Fix calibval variable type
>> watchdog: of_xilinx_wdt: Add comment to spinlock
>> watchdog: of_xilinx_wdt: Used BIT macro
>> watchdog: of_xilinx_wdt: Used dev_dbg()
>> watchdog: of_xilinx_wdt: Initialize watchdog via data structure
>> watchdog: of_xilinx_wdt: Introduce wdttype enum for identification
>> dt-bindings: watchdog: xilinx: Add binding for Versal watchdog
>> watchdog: of_xilinx_wdt: Add Versal support
>> watchdog: of_xilinx_wdt: Wire setting up timeout via module parameter/DT
>>
>> Subbaraya Sundeep Bhatta (7):
>> uio: uio_xilinx_apm: Add Xilinx AXI performance monitor driver
>> samples: xilinx_apm: Add sample application for xilinx_apm
>> usb: chipidea: Add support for VBUS control with PHY
>> usb: chipidea: Use usb2 phy for Zynq platform
>> usb: chipidea: Check usb_phy exists before using it
>> usb: phy: Add platform driver support for ULPI phys
>> usb: dwc3: update GFLADJ_REFCLK_FLADJ in dwc3_frame_length_adjustment
>>
>> Suresh Gupta (42):
>> documentation: dt: add bindings documentation for multi-scaler
>> platform: xilinx: Add mem to mem Multi-Scaler driver (XM2MSC)
>> v4l2-core: Update entries for BGRX32 format
>> v4l: xilinx-multi-scaler: Remove unsupported formats
>> v4l: xilinx-multi-scaler: Add support for VIDIOC_CREATE_BUFS for Dmabuf io_mode
>> v4l: xilinx-multi-scaler: Remove unused variables min_col and min_row
>> v4l: xilinx-multi-scaler: Return the proper parameters in S_FMT
>> v4l: xilinx-multi-scaler: Corrects the format struct in TRY_FMT
>> v4l: xilinx-multi-scaler: Fix buffer type in enum_fmt_vid_out
>> v4l: xilinx-multi-scaler: ENUM_FMT map index with enabled format
>> v4l: xilinx-multi-scaler: Allow abort for individual channels
>> v4l: xilinx-multi-scaler: Fix stop streaming
>> v4l: xilinx-multi-scaler: Allow device run for single channel
>> v4l: xilinx-multi-scaler: Restructuring of functions
>> v4l: xilinx-multi-scaler: Allow stream on for the immediate next channel
>> v4l: xilinx-multi-scaler: Do not allow new task when device is busy
>> v4l: xilinx-multi-scaler: Wait for all running channels to get buffer
>> v4l: xilinx-multi-scaler: Add number of frames processed per channel
>> v4l: xilinx-multi-scaler: Check any channel is still running in streamoff
>> v4l: xilinx-multi-scaler: Fix pointers in set chk chan_stream
>> v4l: xilinx-multi-scaler: Add reserve area between channel 4 and 5
>> v4l: xilinx-multi-scaler: Remove volatile
>> v4l: xilinx-multi-scaler: Change maximum supported height and width
>> v4l: xilinx-multi-scaler: Move tap parameter to xm2msc_dev from channel context
>> v4l: xilinx-multi-scaler: Read tap from the device-tree
>> v4l: xilinx-multi-scaler: Adding coefficients for 8, 10, 12 taps
>> v4l: xilinx-multi-scaler: Select taps as per scaling ratio
>> v4l: xilinx-multi-scaler: Change function names
>> v4l: xilinx-multi-scaler: Noncontiguous planes support
>> v4l: xilinx-multi-scaler: Fix the size of 2nd plane for 4:2:2 video formats
>> media: xilinx: multi-scaler: support VB2_USERPTR IO mode
>> media: xilinx: multi-scaler: Replace dev_info with dev_dbg if all jobs are not ready
>> documentation: dt: multi-scaler: Add properties for pixels per clock
>> media: xilinx: multi-scaler: Add extra padding bytes after each row of pixels
>> media: xilinx: multi-scaler: Align width to pixels per clock
>> media: xilinx: multi-scaler: Add support for formats having contiguous buffers for two planes.
>> documentation: dt: multi-scaler: Add clock framework support
>> media: xilinx: multi-scaler: Add clock framework support
>> media: xilinx: multi-scaler: Support stride and height alignment
>> media: xilinx: m2m: Xilinx M2M composite video framework
>> v4l: xilinx: multi-scaler: Fix precedence error
>> v4l: xilinx: multi-scaler: Set channel parameters to default values
>>
>> Swapna Manupati (2):
>> gpio: zynq: Fix for bug in zynq_gpio_restore_context API
>> gpio: xilinx: Add reset support
>>
>> Tanmay Upadhyay (5):
>> usb: dwc3: hibernation: warn if scratch buffer is NULL
>> usb: dwc3: hibernation: fix scratch buffer allocation
>> usb: dwc3: hibernation: zero out scratchpad buffer
>> usb: dwc3: correct ignoring hibernation event
>> usb: dwc3: retain resource index for unforced stops
>>
>> Tanvi Desai (2):
>> device-tree: spi: Add clock support to xilinx soft AXI SPI IP
>> spi: xilinx: Add clock adaptation
>>
>> Tejas Patel (1):
>> drivers: firmware: xilinx: Update zynqmp firmware driver for versal
>>
>> Tejas Prajapati Rameshchandra (23):
>> mtd: spi-nor: support for dual and parallel flash added.
>> mtd: spi-nor: Flash devices with quad mode support added.
>> mtd: qspi: Corrected the sequence for accessing flash part
>> qspi: Added support for is25lp256d in kernel with quad read and write operation.
>> mtd: spi-nor: Support for ISSI 256Mb 1.8V part added.
>> mtd: spi-nor: corrected write_ear parameters
>> spi: xilinx: Remove bitbang and register with spi core
>> spi: xilinx: Add QUAD support
>> dt-binding: Updated the dt-binding information to work with updated driver.
>> spi: zynqmp-gqspi: Added a support for variable tx bus width.
>> mtd: spi-nor: Added a support for QUAD (x4) write.
>> mtd: spi-nor: flash lock/unlock implementation updated.
>> mtd: spi-nor: Added support for new flash parts.
>> spi: spi-zynqmp-gqspi: use dma mode only if the buffer is not vmalloced
>> mtd: spi-nor: Update erasesize if dual parallel configuration
>> mtd: spi-nor: Added support for 64Mb series flash from ISSI.
>> spi: spi-zynqmp-gqspi: Removed the interrupts not required to be handled.
>> mtd: spi-nor: Added support for read and write ear for macronix flash.
>> mtd: spi-nor: Added support for 128Mb flash from ISSI.
>> mtd: spi-nor: Added support for low density ISSI flash parts.
>> mtd: spi-nor: JEDEC IDs of manufacturer for PMC and ISSI are same
>> spi: spi-zynqmp-gqspi: Added quirks to identify platform
>> dt-bindings: qspi: Document versal-qspi-1.0 compatible string
>>
>> Tejas Upadhyay (6):
>> drm: xilinx: dp: debugfs kernel crash fix
>> drm: xilinx: dp_sub: debugfs kernel crash fix
>> drm: xilinx: dp: driver looping at lower link rate
>> drm: xilinx: dp: Debugfs modify linkrate testcase
>> drm: xlnx: zynqmp_disp: handle software vblank
>> drm: xlnx: zynqmp_dpsub handling for DP PM
>>
>> Topi Kuutela (1):
>> i2c: cadence: Fix power management order of operations
>>
>> Umang Parekh (1):
>> drm: ZynQ OpenCL driver
>>
>> Vasileios Bimpikas (13):
>> staging: xroeframer: Add README to describe roe framer
>> staging: xroeframer: Add devicetree binding
>> staging: xroeframer: Add register map header files
>> staging: xroeframer: Add support for radio over ethernet frame
>> staging: xroeframer: main sysfs source file commit
>> staging: xroeframer: IPv4 sysfs source file commit
>> staging: xroeframer: IPv6 sysfs source file commit
>> staging: xroeframer: UDP sysfs source file commit
>> staging: xroeframer: add support for multi-port Ethernet
>> staging: xroeframer: add sysfs entries for "stats" registers
>> staging: xroeframer: extending sysfs entries for "stats" registers
>> staging: xroeframer: removing /dev/ entries
>> staging: xroetrafficgen: initial commit of roe traffic generator driver
>>
>> Venkatesh Yadav Abbarapu (2):
>> i2c: xiic: defer the probe if clock is not found
>> net: can: xilinx_can: defer the probe if clock is not found
>>
>> Venkateshwar Rao G (19):
>> drm: xlnx: bridge: Add support for set and get output parameters
>> dt: bindings: display: xlnx: Adding csc bindings
>> drm: xlnx: csc: Adding vpss-color space converter driver
>> dt: bindings: display: xlnx: Adding scaler bindings
>> drm: xlnx: scaler: Adding vpss-scaler driver
>> dt-bindings: display: xlnx: Added vpss bridge phandle as optional property
>> drm: xlnx: bridge: Add Xilinx bridge support to set and get output parameters
>> drm: xlnx: sdi: Adding xlnx bridge support
>> dt-bindings: display: xlnx: Added vpss bridge phandle as optional property
>> drm: xlnx: dsi: Adding xlnx bridge support
>> dt: bindings: display: xlnx: Adding gpio reset entry
>> drm: xlnx: scaler: Adding vpss-scaler reset through gpio
>> drm: xlnx: scaler: Adding Zero out H-phase array before changing resolution
>> drm: xlnx: scaler: Add YUV420 support
>> drm: xlnx: csc: Add YUV420 support
>> dt: bindings: display: xlnx: Updated gpio reset entry
>> drm: xlnx: scaler: Updating vpss-scaler reset logic
>> dt: bindings: display: xlnx: Adding gpio reset entry
>> drm: xlnx: csc: Adding vpss-csc reset through gpio
>>
>> Venkateshwar Rao Gannavarapu (12):
>> dt-bindings: clock: Adding si5324 bindings
>> clk: Adding Silicon labs si5324 clock driver
>> clk: Fix compilation errors of silicon labs si5324 driver on zynq platform
>> drm: xlnx: mixer: Update planes asynchronously in the legacy entry
>> drm: xlnx: pl_disp: fix vblank time out issue
>> drm: xlnx: sdi: Disable bridge instance
>> drm: xlnx: dsi: Disable bridge instance
>> drm: xlnx: sdi: Correcting drm property creation logic
>> drm: xlnx: pl_disp: handle software vblank
>> drm: xlnx: pl_disp: Added plane atomic check function
>> dt-bindings: display: xlnx: mixer: Updated compatible string
>> drm: xlnx: mixer: Adding 16 layer support
>>
>> Vishal Sagar (128):
>> staging: xlnxsync: Add driver for Xilinx Synchronizer
>> staging: dt: bindings: xlnxsync: Add initial bindings for Xilinx Synchronizer
>> drm: drm_fourcc: Correct the DRM YUV444 10bpc
>> dmaengine: xilinx_frmbuf: Add support for BGR8 color format in Framebuffer
>> dmaengine: xilinx_frmbuf: Add interlaced support to Xilinx Framebuffer driver
>> dmaengine: xilinx_frmbuf: Add alpha formats support for Framebuffer Read
>> dmaengine: xilinx_frmbuf: Get DMA alignment from device tree for Framebuffer
>> dmaengine: xilinx_frmbuf: Flush the framebuffer FIFO on halt
>> dmaengine: xilinx_frmbuf: Add fid property for interlaced support in framebuffer
>> dmaengine: xilinx_frmbuf: Add check for max width and height in Framebuffer Read/Write
>> dmaengine: xilinx_frmbuf: Add early callback support to Framebuffer Driver
>> dmaengine: xilinx_frmbuf: Add clock framework support to Framebuffer driver
>> dmaengine: xilinx_frmbuf: Fix compilation errors when kernel config doesn't have Framebuffer
>> xcsi2rxss: Add DT documentation for Xilinx MIPI CSI-2 Receiver Subsystem driver
>> xcsi2rxss: Add support for Xilinx CSI-2 Receiver Subsystem
>> dt: bindings: media: xilinx: Documentation for Xilinx UHDSDI Rx driver
>> v4l: xilinx: Driver support for Xilinx UHDSDI Rx subsystem
>> v4l: xilinx: sdirxss: Decode ST352 in irq context
>> v4l: xilinx: sdirxss: Add ST352 decode macros
>> v4l: xilinx: sdirxss: Add support for subdev get frame interval
>> v4l: xilinx: sdirxss: Add v4l control for transport stream type
>> v4l: xilinx: sdirxss: Add V4L control for Active streams
>> v4l: xilinx: sdirxss: Add V4L control for 3G Level B support
>> v4l: xilinx: sdirxss: Update Video lockout Window to 32 bit
>> dt: bindings: media: xilinx: Add rev 3.0 to csi2rxss compatible string
>> v4l: xilinx: csi2rxss: Add rev 3.0 compatible string
>> dt: bindings: media: xilinx: Add YUV420 decoding support in UHDSDI Rx
>> v4l: xilinx: sdirxss: Add support for YUV420 decoding
>> v4l: xilinx: Add BGR color format support.
>> media: xilinx: vip: Correct the fourcc code for BGRX8 format.
>> v4l: xilinx: sdirxss: Correct the v4l2_field to V4L2_FIELD_ALTERNATE
>> v4l: xilinx: dma: Add interlaced support
>> v4l: xilinx: dma: Terminate DMA when media pipeline fails to start
>> v4l: xilinx: sdirxss: Correct the height of SD 525i to 486
>> drm: xlnx: bridge: Add support for VTC as bridge
>> dt-bindings: display: xlnx: Add VTC bindings
>> drm: xlnx: vtc: Adding VTC as bridge driver
>> dt-bindings: display: xlnx: mixer: Adding xlnx vtc bridge support
>> drm: xlnx: mixer: Add VTC bridge support.
>> dt-bindings: display: xlnx: Add VTC bridge support to PL display
>> drm: xlnx: pl_disp: Add VTC bridge support
>> drm: xlnx: vtc: Update license to SPDX
>> drm: xlnx: sdi: Fix VTC polarity for SD modes
>> drm: xlnx: sdi: Fix the HSIZE calculation
>> drm: xlnx: sdi: Fix the Vertical Field 1 Size calculation
>> drm: xlnx: sdi: Fix the VSync_Start and VSync_End for interlaced modes
>> drm: xlnx: sdi: Add support for Field 1 Active size
>> drm: xlnx: sdi: Program Field 1 VTC registers in interlaced mode only
>> drm: xlnx: vtc: Add support for Field 1 Active size
>> drm: xlnx: vtc: Program Field 1 VTC registers in interlaced mode only
>> dt: bindings: media: xilinx: sdirxss : Add clock framework support
>> v4l: xilinx: sdirxss: Add support for clock framework
>> dt: bindings: media: xilinx: Doc for Xilinx AXI4-Stream Switch driver
>> v4l: xilinx: Driver support for Xilinx AXI4-Stream Switch
>> drm: xlnx: sdi: Fix timing for 720x486i SD mode
>> dt-bindings: display: xlnx: Add support for ancillary port
>> drm: xlnx: sdi: Enable support for ancillary data
>> dt-bindings: display: xlnx: Add ST352 payload insertion in Chroma stream
>> drm: xlnx: sdi: Add ST352 payload insertion in Chroma stream
>> drm: xlnx: sdi: Add support for DS2 payload in 3GA mode
>> drm: xlnx: mixer: Fix linking failure for ARCH arm
>> drm: xlnx: sdi: Fix clearing en_st352_c and use_ds2_3ga drm properties
>> documentation: dt: vtpg: Add support for max width and height
>> v4l: xilinx: tpg: Add check for max width and height
>> documentation: dt: demosaic: add support for max width and height
>> v4l: xilinx-demosaic: Add check for max width and height
>> documentation: dt: gamma: Add support for max width and height
>> v4l: xilinx-gamma: Add check for max width and height
>> documentation: dt: vpss-csc: Add support for max width and height
>> v4l: xilinx-vpss-csc: Add check for max width and height
>> documentation: dt: vpss-scaler: Add support for max width and height
>> v4l: xilinx-vpss-scaler: Add check for max width and height
>> v4l: xilinx: vpss-scaler: Fix array out of bound access
>> drm: xlnx: scaler: Fix array out of bound access
>> dt-bindings: csi2rxss: Enable VCX support
>> v4l: xilinx: xcsi2rxss: Add VCX support
>> drm: xlnx: mixer: Fix switching to 4K after 1080p
>> dt-bindings: media: xilinx: demosaic: Make max width, height mandatory
>> v4l: xilinx-demosaic: Correct default values when width, height dt property absent
>> dt-bindings: media: xilinx: vpss-csc: Make max width, height mandatory
>> v4l: xilinx-gamma: Correct default values when max width, height dt property absent
>> v4l: xilinx: vpss-scaler: Correct default values when max width, height dt property absent
>> drm: xlnx: Select VIDEOMODE_HELPERS when DRM_XLNX_PL_DISP is selected
>> drm: xlnx: pl_disp: Enable early callback
>> xilinx: v4l: dma: Stop subdevs in reverse order of starting
>> drm: xlnx: dsi: Fix kernel panic when "halt" is run
>> drm: xlnx: crtc: Fix max width and height overflow
>> dt-bindings: display: xlnx: mixer: Correct DRM fourcc for BGR8 and RGB8
>> dt-bindings: csi2rxss: Add clock framework support
>> v4l: xilinx: xcsi2rxss: Add support for clock framework
>> documentation: dt: vpss-scaler: Fix support for clock framework
>> v4l: xilinx: vpss-scaler: Fix clock framework support
>> dt: bindings: media: xilinx: Add clock support to AXI4 Stream switch
>> v4l: xilinx: axis-switch: Add support for clock framework
>> dt-bindings: display: xlnx: Add clock framework support to DSI Tx
>> drm: xlnx: dsi: Add support for clock framework
>> dt-bindings: display: xlnx: Add clock framework support to SDI Tx
>> drm: xlnx: sdi: Add clock framework support
>> dt-bindings: display: xlnx: Add clock framework support to VPSS CSC bridge driver
>> drm: xlnx: csc: Add clock framework support
>> dt-bindings: display: xlnx: Add clock framework support to VPSS Scaler bridge driver
>> drm: xlnx: scaler: Add support for clock framework
>> dt-bindings: display: xlnx: Add clock framework support to VTC bridge driver
>> drm: xlnx: vtc: Add clock framework support
>> media: v4l: Add 10, 12 and 16 bpc RBG media bus formats
>> media: v4l2-ioctl: Add 12 and 16 bpc RGB pixel formats
>> dt-bindings: dma: xilinx_frmbuf: Add support for 12 and 16 bpc RGB formats
>> dmaengine: xilinx: frmbuf: Add support for 12 and 16 bpc RGB formats
>> v4l: xilinx: vip: Add 12 and 16 bpc RAW and RGB color formats
>> dt-bindings: media: xilinx: csi2rxss: Add RAW16 and RAW20 pixel format strings
>> v4l: xilinx: xcsi2rxss: Add support for RAW16 format
>> v4l: xilinx-demosaic: Add support for 10,12,16 bpc RAW and RGB bus formats
>> drm: xlnx: dsi: Fix the drm property creation
>> dt-bindings: media: xilinx: tpg: Update for v8.0
>> media: xilinx: tpg: Add support for v8.0
>> v4l: xilinx-demosaic: Make max width and height properties mandatory
>> v4l: xilinx-gamma: Make max-width and max-height mandatory dt properties
>> dmaengine: xilinx: frmbuf: Make max-width and max-height mandatory properties
>> dt-bindings: media: vpss-csc: Make max width and height mandatory properties
>> v4l: xilinx-vpss-csc: Make max width and height mandatory properties
>> dt-bindings: media: vpss-scaler: Make max width and height mandatory properties
>> v4l: xilinx: vpss-scaler: Make max width and height mandatory properties
>> dt-bindings: display: xlnx: vpss-csc: Add max width and height properties
>> drm: xlnx: csc: Add max width and height dt properties
>> dt-bindings: display: xlnx: Add max width and height as mandatory properties
>> drm: xlnx: scaler: Add max width and height properties
>> v4l: xilinx: tpg: Dynamically modify TPG output format
>> v4l: xilinx: sdirxss: Fix the media bus formats to 10bpc type
>>
>> Wendy Liang (16):
>> remoteproc: Add sysfs_kick field
>> remoteproc: add kick from sysfs checking internal API
>> remoteproc: add peek/ack remote kick ops
>> remoteproc: Add peek/ack remote kick internal API
>> remoteproc: Add sysfs remote kick APIs
>> Documentation: DTC Bindings: Add Zynq remoteproc binding
>> remoteproc: zynqmp_r5: probe rproc without reserved DMA mem
>> remoteproc: zynqmp_r5: set state to running if r5 is running
>> remoteproc: zynqmp_r5: send vqid with kick
>> remoteproc: sysfs: allow kick to pass small data
>> remoteproc: returns message for peek remote kick function
>> remoteproc: sysfs: add attribute to get remote message
>> remoteproc: zynqmp_r5: update peek remote
>> remoteproc: zynqmp_r5: ack IPI before checking vrings
>> remoteproc: zynqmp_r5: allow kick not to pass message
>> dt-bindings: remoteproc: zynqmp-r5: correct dts example
>>
>> Documentation/ABI/stable/sysfs-firmware-zynqmp | 103 +
>> Documentation/ABI/testing/sysfs-class-fpga-bridge | 9 +
>> .../ABI/testing/sysfs-driver-cortexa53-edac | 10 +
>> .../devicetree/bindings/arm/zynq/zynq-efuse.txt | 15 +
>> .../devicetree/bindings/arm/zynq/zynq-ocmc.txt | 17 +
>> .../devicetree/bindings/ata/ahci-ceva.txt | 3 +
>> .../devicetree/bindings/clock/idt,idt8t49n24x.txt | 156 +
>> .../devicetree/bindings/clock/silabs,si5324.txt | 78 +
>> .../devicetree/bindings/clock/xlnx,versal-clk.txt | 48 +
>> .../devicetree/bindings/crypto/xlnx,zynqmp-aes.txt | 12 +
>> .../devicetree/bindings/crypto/zynqmp-rsa.txt | 12 +
>> .../devicetree/bindings/crypto/zynqmp-sha.txt | 12 +
>> .../devicetree/bindings/display/xlnx/bridge.txt | 29 +
>> .../devicetree/bindings/display/xlnx/xlnx,dsi.txt | 73 +
>> .../bindings/display/xlnx/xlnx,mixer.txt | 163 +
>> .../bindings/display/xlnx/xlnx,pl-disp.txt | 41 +
>> .../bindings/display/xlnx/xlnx,sdi-tx.txt | 54 +
>> .../bindings/display/xlnx/xlnx,vpss-csc.txt | 35 +
>> .../bindings/display/xlnx/xlnx,vpss-scaler.txt | 51 +
>> .../devicetree/bindings/display/xlnx/xlnx,vtc.txt | 32 +
>> .../bindings/display/xlnx/xlnx,zynqmp-dpsub.txt | 82 +
>> .../devicetree/bindings/dma/xilinx/axi-cdma.txt | 31 +
>> .../devicetree/bindings/dma/xilinx/axi-dma.txt | 38 +
>> .../devicetree/bindings/dma/xilinx/ps-pcie-dma.txt | 67 +
>> .../devicetree/bindings/dma/xilinx/vdmatest.txt | 39 +
>> .../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 18 +-
>> .../bindings/dma/xilinx/xilinx_dpdma.txt | 91 +
>> .../bindings/dma/xilinx/xilinx_frmbuf.txt | 123 +
>> .../devicetree/bindings/drm/xilinx/cresample.txt | 22 +
>> .../devicetree/bindings/drm/xilinx/dp.txt | 65 +
>> .../devicetree/bindings/drm/xilinx/dp_sub.txt | 65 +
>> .../devicetree/bindings/drm/xilinx/dsi.txt | 61 +
>> .../devicetree/bindings/drm/xilinx/osd.txt | 19 +
>> .../devicetree/bindings/drm/xilinx/rgb2ycrcb.txt | 14 +
>> .../devicetree/bindings/drm/xilinx/sdi.txt | 34 +
>> .../devicetree/bindings/drm/xilinx/vtc.txt | 18 +
>> .../devicetree/bindings/drm/xilinx/xilinx_drm.txt | 162 +
>> .../devicetree/bindings/drm/zocl/zocl_drm.txt | 13 +
>> .../devicetree/bindings/edac/cortex-arm64-edac.txt | 15 +
>> .../devicetree/bindings/edac/pl310_edac_l2.txt | 19 +
>> .../devicetree/bindings/edac/zynqmp_ocm_edac.txt | 18 +
>> .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 16 +-
>> .../devicetree/bindings/fpga/fpga-region.txt | 1 +
>> .../devicetree/bindings/fpga/xlnx,afi-fpga.txt | 61 +
>> .../devicetree/bindings/fpga/xlnx,versal-fpga.txt | 10 +
>> .../bindings/fpga/xlnx,zynq-afi-fpga.txt | 19 +
>> .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 4 +
>> .../devicetree/bindings/gpio/gpio-xilinx.txt | 21 +-
>> .../devicetree/bindings/gpio/gpio-zynq.txt | 3 +-
>> .../devicetree/bindings/iio/adc/xilinx-ams.txt | 159 +
>> .../devicetree/bindings/iio/adc/xilinx-xadc.txt | 19 +
>> .../bindings/interrupt-controller/xilinx,intc.txt | 56 +
>> .../bindings/media/xilinx/xlnx,csi2rxss.txt | 122 +
>> .../bindings/media/xilinx/xlnx,mem2mem.txt | 25 +
>> .../bindings/media/xilinx/xlnx,sdirxss.txt | 66 +
>> .../bindings/media/xilinx/xlnx,v-axi4s-switch.txt | 141 +
>> .../bindings/media/xilinx/xlnx,v-cfa.txt | 58 +
>> .../bindings/media/xilinx/xlnx,v-cresample.txt | 54 +
>> .../bindings/media/xilinx/xlnx,v-demosaic.txt | 62 +
>> .../bindings/media/xilinx/xlnx,v-gamma-lut.txt | 63 +
>> .../bindings/media/xilinx/xlnx,v-hls.txt | 64 +
>> .../bindings/media/xilinx/xlnx,v-multi-scaler.txt | 95 +
>> .../bindings/media/xilinx/xlnx,v-remapper.txt | 61 +
>> .../bindings/media/xilinx/xlnx,v-rgb2yuv.txt | 54 +
>> .../bindings/media/xilinx/xlnx,v-scaler.txt | 75 +
>> .../bindings/media/xilinx/xlnx,v-scd.txt | 164 +
>> .../bindings/media/xilinx/xlnx,v-switch.txt | 55 +
>> .../bindings/media/xilinx/xlnx,v-tpg.txt | 17 +-
>> .../bindings/media/xilinx/xlnx,v-vpss-csc.txt | 66 +
>> .../bindings/media/xilinx/xlnx,v-vpss-scaler.txt | 93 +
>> .../devicetree/bindings/misc/jesd-phy.txt | 24 +
>> .../devicetree/bindings/misc/jesd204b.txt | 28 +
>> .../devicetree/bindings/misc/xilinx-axitrafgen.txt | 25 +
>> .../devicetree/bindings/misc/xlnx,fclk.txt | 12 +
>> .../devicetree/bindings/misc/xlnx,sd-fec.txt | 58 +
>> .../devicetree/bindings/mmc/arasan,sdhci.txt | 30 +
>> .../devicetree/bindings/mtd/arasan_nand.txt | 33 +
>> Documentation/devicetree/bindings/net/macb.txt | 7 +
>> .../devicetree/bindings/net/ti,dp83867.txt | 4 +
>> .../devicetree/bindings/net/xilinx-phy.txt | 15 +
>> .../bindings/net/xilinx-tsn-ethernet.txt | 54 +
>> .../devicetree/bindings/net/xilinx_axienet.txt | 135 +-
>> .../devicetree/bindings/net/xilinx_emaclite.txt | 34 +
>> .../devicetree/bindings/net/xilinx_tsn.txt | 14 +
>> .../devicetree/bindings/net/xilinx_tsn_ep.txt | 35 +
>> .../devicetree/bindings/net/xilinx_tsn_switch.txt | 23 +
>> .../bindings/nvmem/xlnx,zynqmp-nvmem.txt | 90 +-
>> .../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 2 +
>> .../bindings/pci/xilinx-xdma-pl-pcie.txt | 87 +
>> .../devicetree/bindings/phy/phy-zynqmp.txt | 119 +
>> .../bindings/pinctrl/xlnx,zynqmp-pinctrl.txt | 275 +
>> .../bindings/power/reset/xlnx,zynqmp-power.txt | 41 +-
>> .../remoteproc/xilinx,zynqmp-r5-remoteproc.txt | 135 +
>> .../bindings/remoteproc/zynq_remoteproc.txt | 36 +
>> .../devicetree/bindings/serial/uartlite.c | 26 +
>> .../bindings/soc/xilinx/xlnx,ai-engine-npi.txt | 23 +
>> .../bindings/soc/xilinx/xlnx,ai_engine.txt | 28 +
>> .../devicetree/bindings/soc/xilinx/xlnx,vcu.txt | 54 +-
>> .../bindings/sound/xlnx,audio-formatter.txt | 6 +-
>> .../devicetree/bindings/sound/xlnx,dp-snd-card.txt | 17 +
>> .../bindings/sound/xlnx,dp-snd-codec.txt | 18 +
>> .../devicetree/bindings/sound/xlnx,dp-snd-pcm.txt | 18 +
>> .../devicetree/bindings/sound/xlnx,i2s.txt | 14 +
>> .../devicetree/bindings/sound/xlnx,spdif.txt | 9 +-
>> .../bindings/sound/xlnx,v-uhdsdi-audio.txt | 60 +
>> .../devicetree/bindings/spi/spi-xilinx.txt | 15 +-
>> .../devicetree/bindings/spi/spi-zynqmp-qspi.txt | 11 +-
>> .../bindings/staging/xroeframer/xroeframer.txt | 17 +
>> .../staging/xroetrafficgen/xroetrafficgen.txt | 15 +
>> .../devicetree/bindings/uio/xilinx_apm.txt | 44 +
>> .../devicetree/bindings/usb/dwc3-xilinx.txt | 21 +-
>> Documentation/devicetree/bindings/usb/dwc3.txt | 13 +
>> .../devicetree/bindings/usb/ehci-xilinx.txt | 21 +
>> .../devicetree/bindings/usb/udc-xilinx.txt | 19 +-
>> .../devicetree/bindings/video/xilinx-fb.txt | 35 +
>> .../devicetree/bindings/watchdog/of-xilinx-wdt.txt | 21 +-
>> Documentation/devicetree/bindings/xilinx.txt | 1 +
>> Documentation/devicetree/bindings/xlnx,ctrl-fb.txt | 22 +
>> .../devicetree/bindings/xlnx,ctrl-vpss.txt | 21 +
>> Documentation/devicetree/configfs-overlays.txt | 31 +
>> Documentation/driver-api/dmaengine/provider.rst | 7 +
>> Documentation/media/uapi/v4l/subdev-formats.rst | 1120 +++-
>> Documentation/misc-devices/xilinx_sdfec.rst | 291 ++
>> Documentation/misc-devices/xilinx_trafgen.txt | 87 +
>> MAINTAINERS | 289 ++
>> arch/arm/boot/dts/zynq-7000.dtsi | 66 +-
>> arch/arm/boot/dts/zynq-cc108.dts | 41 +
>> arch/arm/boot/dts/zynq-zc702.dts | 83 +-
>> arch/arm/boot/dts/zynq-zc706.dts | 54 +-
>> arch/arm/boot/dts/zynq-zc770-xm010.dts | 38 +-
>> arch/arm/boot/dts/zynq-zc770-xm011.dts | 42 +
>> arch/arm/boot/dts/zynq-zc770-xm012.dts | 42 +
>> arch/arm/boot/dts/zynq-zc770-xm013.dts | 39 +-
>> arch/arm/boot/dts/zynq-zed.dts | 51 +-
>> arch/arm/boot/dts/zynq-zturn.dts | 2 +-
>> arch/arm/boot/dts/zynq-zybo.dts | 12 +-
>> arch/arm/configs/xilinx_zynq_defconfig | 242 +
>> arch/arm/include/asm/hardirq.h | 2 +-
>> arch/arm/include/asm/smp.h | 3 +
>> arch/arm/kernel/machine_kexec.c | 3 +
>> arch/arm/kernel/smp.c | 168 +-
>> arch/arm/mach-zynq/Kconfig | 16 +
>> arch/arm/mach-zynq/Makefile | 7 +-
>> arch/arm/mach-zynq/common.c | 9 +-
>> arch/arm/mach-zynq/common.h | 26 +
>> arch/arm/mach-zynq/efuse.c | 75 +
>> arch/arm/mach-zynq/platsmp.c | 4 +
>> arch/arm/mach-zynq/pm.c | 170 +
>> arch/arm/mach-zynq/slcr.c | 47 +-
>> arch/arm/mach-zynq/suspend.S | 185 +
>> arch/arm/mach-zynq/zynq_ocm.c | 245 +
>> arch/arm64/Kconfig.platforms | 2 +
>> arch/arm64/boot/dts/xilinx/Makefile | 3 +
>> arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 313 ++
>> arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 46 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 35 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 32 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 32 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revB.dts | 100 +
>> .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 309 +-
>> .../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 382 +-
>> .../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 62 +-
>> .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 47 +-
>> .../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 331 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 332 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 444 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 1 +
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 316 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 547 ++
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 379 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 322 +-
>> arch/arm64/boot/dts/xilinx/zynqmp-zcu1285-revA.dts | 245 +
>> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 622 ++-
>> arch/arm64/configs/xilinx_versal_defconfig | 178 +
>> arch/arm64/configs/xilinx_zynqmp_defconfig | 399 ++
>> arch/microblaze/Kconfig | 1 +
>> arch/microblaze/configs/mmu_defconfig | 21 +-
>> arch/microblaze/configs/nommu_defconfig | 21 +-
>> arch/microblaze/include/asm/Kbuild | 1 +
>> arch/microblaze/include/asm/irq.h | 1 -
>> arch/microblaze/kernel/head.S | 2 +-
>> arch/microblaze/kernel/vmlinux.lds.S | 2 +-
>> arch/microblaze/pci/pci-common.c | 32 +-
>> crypto/af_alg.c | 7 +
>> crypto/algif_skcipher.c | 7 +
>> crypto/blkcipher.c | 9 +
>> crypto/skcipher.c | 18 +
>> drivers/bluetooth/hci_ll.c | 1 +
>> drivers/clk/Kconfig | 33 +
>> drivers/clk/Makefile | 4 +-
>> drivers/clk/clk-fixed-factor.c | 5 +-
>> drivers/clk/clk-si5324.c | 1227 +++++
>> drivers/clk/clk-si5324.h | 140 +
>> drivers/clk/clk.c | 28 +
>> drivers/clk/idt/Makefile | 3 +
>> drivers/clk/idt/clk-idt8t49n24x-core.c | 933 ++++
>> drivers/clk/idt/clk-idt8t49n24x-core.h | 272 +
>> drivers/clk/idt/clk-idt8t49n24x-debugfs.c | 382 ++
>> drivers/clk/idt/clk-idt8t49n24x-debugfs.h | 21 +
>> drivers/clk/idt/clk-idt8t49n24x.c | 641 +++
>> drivers/clk/si5324.h | 68 +
>> drivers/clk/si5324drv.c | 382 ++
>> drivers/clk/si5324drv.h | 100 +
>> drivers/clk/zynq/clkc.c | 43 +
>> drivers/clk/zynqmp/clkc.c | 6 +
>> drivers/clk/zynqmp/divider.c | 63 +-
>> drivers/clk/zynqmp/pll.c | 9 +-
>> drivers/crypto/Kconfig | 30 +
>> drivers/crypto/Makefile | 3 +
>> drivers/crypto/zynqmp-aes.c | 336 ++
>> drivers/crypto/zynqmp-rsa.c | 240 +
>> drivers/crypto/zynqmp-sha.c | 301 ++
>> drivers/dma/Kconfig | 14 +
>> drivers/dma/dmaengine.c | 7 +
>> drivers/dma/dmatest.c | 38 +-
>> drivers/dma/xilinx/Kconfig | 67 +
>> drivers/dma/xilinx/Makefile | 8 +
>> drivers/dma/xilinx/axidmatest.c | 664 +++
>> drivers/dma/xilinx/cdmatest.c | 662 +++
>> drivers/dma/xilinx/vdmatest.c | 662 +++
>> drivers/dma/xilinx/xilinx_dma.c | 302 +-
>> drivers/dma/xilinx/xilinx_dpdma.c | 2322 +++++++++
>> drivers/dma/xilinx/xilinx_frmbuf.c | 1709 +++++++
>> drivers/dma/xilinx/xilinx_ps_pcie.h | 44 +
>> drivers/dma/xilinx/xilinx_ps_pcie_dma_client.c | 1402 +++++
>> drivers/dma/xilinx/xilinx_ps_pcie_main.c | 200 +
>> drivers/dma/xilinx/xilinx_ps_pcie_platform.c | 3170 ++++++++++++
>> drivers/dma/xilinx/zynqmp_dma.c | 94 +
>> drivers/edac/Kconfig | 22 +
>> drivers/edac/Makefile | 3 +
>> drivers/edac/cortex_arm64_edac.c | 470 ++
>> drivers/edac/pl310_edac_l2.c | 233 +
>> drivers/edac/zynqmp_ocm_edac.c | 651 +++
>> drivers/firmware/xilinx/Kconfig | 6 +
>> drivers/firmware/xilinx/Makefile | 3 +-
>> drivers/firmware/xilinx/zynqmp-debug.c | 260 +
>> drivers/firmware/xilinx/zynqmp-ggs.c | 289 ++
>> drivers/firmware/xilinx/zynqmp-secure.c | 197 +
>> drivers/firmware/xilinx/zynqmp.c | 910 +++-
>> drivers/fpga/Kconfig | 34 +
>> drivers/fpga/Makefile | 3 +
>> drivers/fpga/fpga-bridge.c | 30 +
>> drivers/fpga/fpga-mgr.c | 242 +
>> drivers/fpga/fpga-region.c | 10 +
>> drivers/fpga/versal-fpga.c | 201 +
>> drivers/fpga/xilinx-afi.c | 92 +
>> drivers/fpga/zynq-afi.c | 81 +
>> drivers/fpga/zynqmp-fpga.c | 260 +-
>> drivers/gpio/gpio-xilinx.c | 685 ++-
>> drivers/gpio/gpio-zynq.c | 57 +-
>> drivers/gpu/drm/Kconfig | 6 +
>> drivers/gpu/drm/Makefile | 3 +
>> drivers/gpu/drm/drm_fourcc.c | 42 +
>> drivers/gpu/drm/drm_framebuffer.c | 3 +-
>> drivers/gpu/drm/panel/panel-simple.c | 31 +
>> drivers/gpu/drm/xilinx/Kconfig | 59 +
>> drivers/gpu/drm/xilinx/Makefile | 14 +
>> drivers/gpu/drm/xilinx/xilinx_cresample.c | 154 +
>> drivers/gpu/drm/xilinx/xilinx_cresample.h | 40 +
>> drivers/gpu/drm/xilinx/xilinx_drm_connector.c | 204 +
>> drivers/gpu/drm/xilinx/xilinx_drm_connector.h | 29 +
>> drivers/gpu/drm/xilinx/xilinx_drm_crtc.c | 595 +++
>> drivers/gpu/drm/xilinx/xilinx_drm_crtc.h | 39 +
>> drivers/gpu/drm/xilinx/xilinx_drm_dp.c | 2186 ++++++++
>> drivers/gpu/drm/xilinx/xilinx_drm_dp_sub.c | 2265 ++++++++
>> drivers/gpu/drm/xilinx/xilinx_drm_dp_sub.h | 69 +
>> drivers/gpu/drm/xilinx/xilinx_drm_drv.c | 614 +++
>> drivers/gpu/drm/xilinx/xilinx_drm_drv.h | 65 +
>> drivers/gpu/drm/xilinx/xilinx_drm_dsi.c | 808 +++
>> drivers/gpu/drm/xilinx/xilinx_drm_encoder.c | 240 +
>> drivers/gpu/drm/xilinx/xilinx_drm_encoder.h | 28 +
>> drivers/gpu/drm/xilinx/xilinx_drm_fb.c | 516 ++
>> drivers/gpu/drm/xilinx/xilinx_drm_fb.h | 38 +
>> drivers/gpu/drm/xilinx/xilinx_drm_gem.c | 45 +
>> drivers/gpu/drm/xilinx/xilinx_drm_gem.h | 25 +
>> drivers/gpu/drm/xilinx/xilinx_drm_plane.c | 1098 ++++
>> drivers/gpu/drm/xilinx/xilinx_drm_plane.h | 61 +
>> drivers/gpu/drm/xilinx/xilinx_drm_sdi.c | 1452 ++++++
>> drivers/gpu/drm/xilinx/xilinx_drm_sdi.h | 29 +
>> drivers/gpu/drm/xilinx/xilinx_osd.c | 382 ++
>> drivers/gpu/drm/xilinx/xilinx_osd.h | 62 +
>> drivers/gpu/drm/xilinx/xilinx_rgb2yuv.c | 119 +
>> drivers/gpu/drm/xilinx/xilinx_rgb2yuv.h | 35 +
>> drivers/gpu/drm/xilinx/xilinx_vtc.c | 645 +++
>> drivers/gpu/drm/xilinx/xilinx_vtc.h | 44 +
>> drivers/gpu/drm/xlnx/Kconfig | 104 +
>> drivers/gpu/drm/xlnx/Makefile | 21 +
>> drivers/gpu/drm/xlnx/xlnx_bridge.c | 561 ++
>> drivers/gpu/drm/xlnx/xlnx_bridge.h | 178 +
>> drivers/gpu/drm/xlnx/xlnx_crtc.c | 206 +
>> drivers/gpu/drm/xlnx/xlnx_crtc.h | 76 +
>> drivers/gpu/drm/xlnx/xlnx_csc.c | 571 +++
>> drivers/gpu/drm/xlnx/xlnx_drv.c | 540 ++
>> drivers/gpu/drm/xlnx/xlnx_drv.h | 33 +
>> drivers/gpu/drm/xlnx/xlnx_dsi.c | 907 ++++
>> drivers/gpu/drm/xlnx/xlnx_fb.c | 306 ++
>> drivers/gpu/drm/xlnx/xlnx_fb.h | 33 +
>> drivers/gpu/drm/xlnx/xlnx_gem.c | 47 +
>> drivers/gpu/drm/xlnx/xlnx_gem.h | 26 +
>> drivers/gpu/drm/xlnx/xlnx_mixer.c | 2821 ++++++++++
>> drivers/gpu/drm/xlnx/xlnx_pl_disp.c | 618 +++
>> drivers/gpu/drm/xlnx/xlnx_scaler.c | 1748 +++++++
>> drivers/gpu/drm/xlnx/xlnx_sdi.c | 1227 +++++
>> drivers/gpu/drm/xlnx/xlnx_sdi_modes.h | 356 ++
>> drivers/gpu/drm/xlnx/xlnx_sdi_timing.c | 425 ++
>> drivers/gpu/drm/xlnx/xlnx_sdi_timing.h | 20 +
>> drivers/gpu/drm/xlnx/xlnx_vtc.c | 447 ++
>> drivers/gpu/drm/xlnx/zynqmp_disp.c | 3333 ++++++++++++
>> drivers/gpu/drm/xlnx/zynqmp_disp.h | 36 +
>> drivers/gpu/drm/xlnx/zynqmp_dp.c | 1916 +++++++
>> drivers/gpu/drm/xlnx/zynqmp_dp.h | 38 +
>> drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 194 +
>> drivers/gpu/drm/xlnx/zynqmp_dpsub.h | 28 +
>> drivers/gpu/drm/zocl/Kconfig | 8 +
>> drivers/gpu/drm/zocl/Makefile | 4 +
>> drivers/gpu/drm/zocl/zocl_bo.c | 271 +
>> drivers/gpu/drm/zocl/zocl_drv.c | 217 +
>> drivers/gpu/drm/zocl/zocl_drv.h | 59 +
>> drivers/hwmon/pmbus/pmbus.c | 7 +
>> drivers/i2c/busses/i2c-cadence.c | 543 +-
>> drivers/i2c/busses/i2c-xiic.c | 69 +-
>> drivers/iio/adc/Kconfig | 12 +-
>> drivers/iio/adc/Makefile | 1 +
>> drivers/iio/adc/xilinx-ams.c | 1109 ++++
>> drivers/iio/adc/xilinx-ams.h | 278 +
>> drivers/iio/adc/xilinx-xadc-core.c | 122 +-
>> drivers/irqchip/Kconfig | 6 +-
>> drivers/irqchip/irq-gic.c | 17 +-
>> drivers/irqchip/irq-xilinx-intc.c | 143 +-
>> drivers/media/i2c/adv7511.c | 531 +-
>> drivers/media/i2c/ov5640.c | 247 +-
>> drivers/media/media-entity.c | 31 +-
>> drivers/media/platform/xilinx/Kconfig | 134 +-
>> drivers/media/platform/xilinx/Makefile | 19 +
>> drivers/media/platform/xilinx/xilinx-axis-switch.c | 588 +++
>> drivers/media/platform/xilinx/xilinx-cfa.c | 394 ++
>> drivers/media/platform/xilinx/xilinx-cresample.c | 447 ++
>> drivers/media/platform/xilinx/xilinx-csi2rxss.c | 2023 ++++++++
>> drivers/media/platform/xilinx/xilinx-demosaic.c | 418 ++
>> drivers/media/platform/xilinx/xilinx-dma.c | 754 ++-
>> drivers/media/platform/xilinx/xilinx-dma.h | 16 +-
>> drivers/media/platform/xilinx/xilinx-gamma-coeff.h | 5385 ++++++++++++++++++++
>> drivers/media/platform/xilinx/xilinx-gamma.c | 543 ++
>> drivers/media/platform/xilinx/xilinx-hls-common.h | 36 +
>> drivers/media/platform/xilinx/xilinx-hls.c | 481 ++
>> drivers/media/platform/xilinx/xilinx-m2m.c | 2106 ++++++++
>> .../platform/xilinx/xilinx-multi-scaler-coeff.h | 574 +++
>> .../media/platform/xilinx/xilinx-multi-scaler.c | 2449 +++++++++
>> drivers/media/platform/xilinx/xilinx-remapper.c | 546 ++
>> drivers/media/platform/xilinx/xilinx-rgb2yuv.c | 566 ++
>> drivers/media/platform/xilinx/xilinx-scaler.c | 708 +++
>> .../platform/xilinx/xilinx-scenechange-channel.c | 352 ++
>> .../media/platform/xilinx/xilinx-scenechange-dma.c | 554 ++
>> drivers/media/platform/xilinx/xilinx-scenechange.c | 191 +
>> drivers/media/platform/xilinx/xilinx-scenechange.h | 234 +
>> drivers/media/platform/xilinx/xilinx-sdirxss.c | 1855 +++++++
>> drivers/media/platform/xilinx/xilinx-switch.c | 460 ++
>> drivers/media/platform/xilinx/xilinx-tpg.c | 627 ++-
>> drivers/media/platform/xilinx/xilinx-vip.c | 177 +-
>> drivers/media/platform/xilinx/xilinx-vip.h | 14 +-
>> drivers/media/platform/xilinx/xilinx-vipp.c | 62 +-
>> drivers/media/platform/xilinx/xilinx-vipp.h | 5 +
>> drivers/media/platform/xilinx/xilinx-vpss-csc.c | 1169 +++++
>> drivers/media/platform/xilinx/xilinx-vpss-scaler.c | 1878 +++++++
>> drivers/media/platform/xilinx/xilinx-vtc.c | 18 +
>> drivers/media/platform/xilinx/xilinx-vtc.h | 1 +
>> drivers/media/usb/uvc/uvc_queue.c | 13 +
>> drivers/media/usb/uvc/uvc_video.c | 64 +-
>> drivers/media/usb/uvc/uvcvideo.h | 5 +-
>> drivers/media/v4l2-core/v4l2-ioctl.c | 30 +
>> drivers/media/v4l2-core/v4l2-subdev.c | 28 +
>> drivers/misc/Kconfig | 25 +
>> drivers/misc/Makefile | 3 +
>> drivers/misc/jesd204b/Kconfig | 28 +
>> drivers/misc/jesd204b/Makefile | 5 +
>> drivers/misc/jesd204b/gtx7s_cpll_bands.c | 88 +
>> drivers/misc/jesd204b/gtx7s_cpll_bands.h | 31 +
>> drivers/misc/jesd204b/gtx7s_qpll_bands.c | 96 +
>> drivers/misc/jesd204b/gtx7s_qpll_bands.h | 30 +
>> drivers/misc/jesd204b/jesd_phy.c | 384 ++
>> drivers/misc/jesd204b/jesd_phy.h | 42 +
>> drivers/misc/jesd204b/s7_gtxe2_drp.h | 123 +
>> drivers/misc/jesd204b/xilinx_jesd204b.c | 399 ++
>> drivers/misc/jesd204b/xilinx_jesd204b.h | 135 +
>> drivers/misc/xilinx_sdfec.c | 1683 ++++++
>> drivers/misc/xilinx_trafgen.c | 1494 ++++++
>> drivers/mmc/core/sd.c | 17 +
>> drivers/mmc/host/sdhci-of-arasan.c | 629 ++-
>> drivers/mmc/host/sdhci-pltfm.c | 3 +
>> drivers/mmc/host/sdhci.c | 3 +-
>> drivers/mmc/host/sdhci.h | 2 +
>> drivers/mtd/chips/cfi_probe.c | 45 +
>> drivers/mtd/devices/m25p80.c | 1 +
>> drivers/mtd/nand/raw/Kconfig | 14 +
>> drivers/mtd/nand/raw/Makefile | 2 +
>> drivers/mtd/nand/raw/arasan_nand.c | 1465 ++++++
>> drivers/mtd/nand/raw/nand_base.c | 15 +-
>> drivers/mtd/nand/raw/nand_onfi.c | 8 +
>> drivers/mtd/nand/raw/nand_timings.c | 6 +
>> drivers/mtd/nand/raw/pl353_nand.c | 1398 +++++
>> drivers/mtd/spi-nor/spi-nor.c | 769 ++-
>> drivers/net/can/xilinx_can.c | 279 +-
>> drivers/net/ethernet/cadence/macb.h | 37 +-
>> drivers/net/ethernet/cadence/macb_main.c | 344 +-
>> drivers/net/ethernet/cadence/macb_ptp.c | 21 +-
>> drivers/net/ethernet/xilinx/Kconfig | 79 +-
>> drivers/net/ethernet/xilinx/Makefile | 10 +-
>> drivers/net/ethernet/xilinx/ll_temac_main.c | 16 +-
>> drivers/net/ethernet/xilinx/ll_temac_mdio.c | 5 +-
>> drivers/net/ethernet/xilinx/xilinx_axienet.h | 747 ++-
>> drivers/net/ethernet/xilinx/xilinx_axienet_dma.c | 507 ++
>> drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2676 +++++++---
>> drivers/net/ethernet/xilinx/xilinx_axienet_mcdma.c | 1043 ++++
>> drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 75 +-
>> drivers/net/ethernet/xilinx/xilinx_emaclite.c | 59 +-
>> drivers/net/ethernet/xilinx/xilinx_tsn_cb.c | 177 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_ep.c | 161 +
>> .../net/ethernet/xilinx/xilinx_tsn_preemption.c | 223 +
>> .../net/ethernet/xilinx/xilinx_tsn_preemption.h | 159 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_ptp.h | 88 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_ptp_clock.c | 325 ++
>> drivers/net/ethernet/xilinx/xilinx_tsn_ptp_xmit.c | 369 ++
>> drivers/net/ethernet/xilinx/xilinx_tsn_qci.c | 151 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_shaper.c | 232 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_shaper.h | 151 +
>> drivers/net/ethernet/xilinx/xilinx_tsn_switch.c | 807 +++
>> drivers/net/ethernet/xilinx/xilinx_tsn_switch.h | 364 ++
>> drivers/net/ethernet/xilinx/xilinx_tsn_timer.h | 73 +
>> drivers/net/phy/Kconfig | 5 +
>> drivers/net/phy/Makefile | 1 +
>> drivers/net/phy/dp83867.c | 92 +-
>> drivers/net/phy/xilinx_phy.c | 160 +
>> drivers/nvmem/zynqmp_nvmem.c | 184 +-
>> drivers/of/Kconfig | 7 +
>> drivers/of/Makefile | 1 +
>> drivers/of/configfs.c | 293 ++
>> drivers/of/dynamic.c | 173 +
>> drivers/pci/Kconfig | 2 +-
>> drivers/pci/controller/Kconfig | 8 +
>> drivers/pci/controller/Makefile | 1 +
>> drivers/pci/controller/pcie-xdma-pl.c | 811 +++
>> drivers/pci/controller/pcie-xilinx-nwl.c | 27 +-
>> drivers/phy/Kconfig | 9 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-zynqmp.c | 1591 ++++++
>> drivers/pinctrl/Kconfig | 8 +
>> drivers/pinctrl/Makefile | 1 +
>> drivers/pinctrl/pinctrl-zynqmp.c | 1074 ++++
>> drivers/remoteproc/Kconfig | 20 +
>> drivers/remoteproc/Makefile | 2 +
>> drivers/remoteproc/remoteproc_internal.h | 23 +
>> drivers/remoteproc/remoteproc_sysfs.c | 140 +
>> drivers/remoteproc/zynq_remoteproc.c | 479 ++
>> drivers/remoteproc/zynqmp_r5_remoteproc.c | 968 ++++
>> drivers/reset/Makefile | 1 -
>> drivers/rtc/rtc-zynqmp.c | 2 +-
>> drivers/soc/xilinx/Kconfig | 7 +-
>> drivers/soc/xilinx/Makefile | 4 +-
>> drivers/soc/xilinx/xlnx_vcu.c | 579 +--
>> drivers/soc/xilinx/xlnx_vcu_clk.c | 915 ++++
>> drivers/soc/xilinx/xlnx_vcu_core.c | 168 +
>> drivers/soc/xilinx/zynqmp/Makefile | 1 +
>> drivers/soc/xilinx/zynqmp/tap_delays.c | 69 +
>> drivers/soc/xilinx/zynqmp_power.c | 121 +-
>> drivers/spi/Kconfig | 15 +-
>> drivers/spi/spi-mem.c | 2 +
>> drivers/spi/spi-xilinx.c | 1055 ++--
>> drivers/spi/spi-zynqmp-gqspi.c | 402 +-
>> drivers/spi/spi.c | 8 +
>> drivers/staging/Kconfig | 14 +
>> drivers/staging/Makefile | 6 +
>> drivers/staging/apf/Kconfig | 19 +
>> drivers/staging/apf/Makefile | 9 +
>> drivers/staging/apf/dt-binding.txt | 17 +
>> drivers/staging/apf/xilinx-dma-apf.c | 1232 +++++
>> drivers/staging/apf/xilinx-dma-apf.h | 234 +
>> drivers/staging/apf/xlnk-eng.c | 242 +
>> drivers/staging/apf/xlnk-eng.h | 33 +
>> drivers/staging/apf/xlnk-ioctl.h | 37 +
>> drivers/staging/apf/xlnk-sysdef.h | 34 +
>> drivers/staging/apf/xlnk.c | 1580 ++++++
>> drivers/staging/apf/xlnk.h | 175 +
>> .../clocking-wizard/clk-xlnx-clock-wizard.c | 398 +-
>> drivers/staging/clocking-wizard/dt-binding.txt | 4 +-
>> drivers/staging/fclk/Kconfig | 9 +
>> drivers/staging/fclk/Makefile | 1 +
>> drivers/staging/fclk/TODO | 2 +
>> drivers/staging/fclk/dt-binding.txt | 16 +
>> drivers/staging/fclk/xilinx_fclk.c | 125 +
>> drivers/staging/xlnx_ctrl_driver/Kconfig | 15 +
>> drivers/staging/xlnx_ctrl_driver/MAINTAINERS | 4 +
>> drivers/staging/xlnx_ctrl_driver/Makefile | 2 +
>> drivers/staging/xlnx_ctrl_driver/xlnx_frmb.c | 290 ++
>> drivers/staging/xlnx_ctrl_driver/xlnx_vpss.c | 595 +++
>> drivers/staging/xlnx_ernic/Kconfig | 4 +
>> drivers/staging/xlnx_ernic/MAINTAINERS | 4 +
>> drivers/staging/xlnx_ernic/Makefile | 7 +
>> drivers/staging/xlnx_ernic/dt-binding.txt | 29 +
>> drivers/staging/xlnx_ernic/xcm.c | 1962 +++++++
>> drivers/staging/xlnx_ernic/xcm.h | 170 +
>> drivers/staging/xlnx_ernic/xcommon.h | 73 +
>> drivers/staging/xlnx_ernic/xernic_bw_test.c | 482 ++
>> drivers/staging/xlnx_ernic/xhw_config.h | 26 +
>> drivers/staging/xlnx_ernic/xhw_def.h | 641 +++
>> drivers/staging/xlnx_ernic/xif.h | 239 +
>> drivers/staging/xlnx_ernic/xioctl.h | 24 +
>> drivers/staging/xlnx_ernic/xmain.c | 1592 ++++++
>> drivers/staging/xlnx_ernic/xmain.h | 33 +
>> drivers/staging/xlnx_ernic/xmr.c | 413 ++
>> drivers/staging/xlnx_ernic/xmr.h | 68 +
>> drivers/staging/xlnx_ernic/xperftest.h | 33 +
>> drivers/staging/xlnx_ernic/xqp.c | 1310 +++++
>> drivers/staging/xlnx_ernic/xqp.h | 114 +
>> drivers/staging/xlnx_ernic/xrocev2.h | 409 ++
>> drivers/staging/xlnxsync/Kconfig | 11 +
>> drivers/staging/xlnxsync/MAINTAINERS | 4 +
>> drivers/staging/xlnxsync/Makefile | 1 +
>> drivers/staging/xlnxsync/dt-binding.txt | 34 +
>> drivers/staging/xlnxsync/xlnxsync.c | 875 ++++
>> drivers/staging/xroeframer/Kconfig | 18 +
>> drivers/staging/xroeframer/Makefile | 12 +
>> drivers/staging/xroeframer/README | 47 +
>> drivers/staging/xroeframer/roe_framer_ctrl.h | 1088 ++++
>> drivers/staging/xroeframer/sysfs_xroe.c | 562 ++
>> .../staging/xroeframer/sysfs_xroe_framer_ipv4.c | 718 +++
>> .../staging/xroeframer/sysfs_xroe_framer_ipv6.c | 571 +++
>> .../staging/xroeframer/sysfs_xroe_framer_stats.c | 401 ++
>> drivers/staging/xroeframer/sysfs_xroe_framer_udp.c | 181 +
>> drivers/staging/xroeframer/xroe_framer.c | 155 +
>> drivers/staging/xroeframer/xroe_framer.h | 63 +
>> drivers/staging/xroetrafficgen/Kconfig | 14 +
>> drivers/staging/xroetrafficgen/Makefile | 8 +
>> drivers/staging/xroetrafficgen/README | 19 +
>> drivers/staging/xroetrafficgen/roe_radio_ctrl.h | 183 +
>> .../xroetrafficgen/xroe-traffic-gen-sysfs.c | 824 +++
>> drivers/staging/xroetrafficgen/xroe-traffic-gen.c | 124 +
>> drivers/staging/xroetrafficgen/xroe-traffic-gen.h | 15 +
>> drivers/tty/hvc/hvc_dcc.c | 28 +
>> drivers/tty/serial/8250/8250_of.c | 4 +-
>> drivers/tty/serial/Kconfig | 9 -
>> drivers/tty/serial/uartlite.c | 263 +-
>> drivers/tty/serial/xilinx_uartps.c | 15 +-
>> drivers/uio/Kconfig | 24 +
>> drivers/uio/Makefile | 4 +-
>> drivers/uio/uio.c | 43 +
>> drivers/uio/uio_dmabuf.c | 210 +
>> drivers/uio/uio_dmabuf.h | 26 +
>> drivers/uio/uio_xilinx_ai_engine.c | 296 ++
>> drivers/uio/uio_xilinx_apm.c | 369 ++
>> drivers/usb/chipidea/ci_hdrc_usb2.c | 5 +
>> drivers/usb/chipidea/host.c | 9 +
>> drivers/usb/chipidea/otg_fsm.c | 9 +
>> drivers/usb/dwc3/Kconfig | 8 +
>> drivers/usb/dwc3/Makefile | 10 +-
>> drivers/usb/dwc3/core.c | 236 +-
>> drivers/usb/dwc3/core.h | 97 +-
>> drivers/usb/dwc3/debugfs.c | 50 +
>> drivers/usb/dwc3/dwc3-of-simple.c | 357 +-
>> drivers/usb/dwc3/ep0.c | 43 +-
>> drivers/usb/dwc3/gadget.c | 334 +-
>> drivers/usb/dwc3/gadget.h | 18 +
>> drivers/usb/dwc3/gadget_hibernation.c | 567 +++
>> drivers/usb/dwc3/host.c | 23 +
>> drivers/usb/dwc3/otg.c | 2199 ++++++++
>> drivers/usb/dwc3/otg.h | 252 +
>> drivers/usb/dwc3/platform_data.h | 54 +
>> drivers/usb/gadget/configfs.c | 45 +-
>> drivers/usb/gadget/function/f_tcm.c | 311 +-
>> drivers/usb/gadget/function/tcm.h | 7 +-
>> drivers/usb/gadget/function/uvc_video.c | 5 +-
>> drivers/usb/gadget/udc/udc-xilinx.c | 81 +-
>> drivers/usb/host/ehci-xilinx-of.c | 12 +-
>> drivers/usb/host/xhci-hub.c | 7 +
>> drivers/usb/host/xhci-mem.c | 14 +
>> drivers/usb/host/xhci-plat.c | 59 +
>> drivers/usb/host/xhci-ring.c | 107 +-
>> drivers/usb/host/xhci.c | 30 +-
>> drivers/usb/host/xhci.h | 5 +
>> drivers/usb/phy/Kconfig | 1 +
>> drivers/usb/phy/phy-ulpi.c | 99 +
>> drivers/usb/storage/uas.c | 307 +-
>> drivers/usb/storage/unusual_uas.h | 6 +
>> drivers/watchdog/cadence_wdt.c | 6 +-
>> drivers/watchdog/of_xilinx_wdt.c | 302 +-
>> include/crypto/if_alg.h | 2 +
>> include/crypto/skcipher.h | 8 +
>> include/drm/drm_encoder_slave.h | 24 +
>> include/drm/drm_fourcc.h | 20 +-
>> include/dt-bindings/clock/xlnx-versal-clk.h | 123 +
>> include/dt-bindings/drm/mipi-dsi.h | 11 +
>> include/dt-bindings/media/xilinx-vip.h | 6 +
>> include/dt-bindings/phy/phy.h | 2 +
>> include/dt-bindings/pinctrl/pinctrl-zynqmp.h | 36 +
>> include/dt-bindings/power/xlnx-versal-power.h | 40 +
>> include/linux/clk-provider.h | 1 +
>> include/linux/clk/zynq.h | 4 +
>> include/linux/crypto.h | 12 +
>> include/linux/dma/xilinx_frmbuf.h | 204 +
>> include/linux/dma/xilinx_ps_pcie_dma.h | 69 +
>> include/linux/dmaengine.h | 19 +
>> include/linux/firmware/xlnx-zynqmp.h | 336 +-
>> include/linux/fpga/fpga-mgr.h | 20 +-
>> include/linux/irqchip/arm-gic.h | 3 +
>> include/linux/mtd/mtd.h | 3 +-
>> include/linux/mtd/onfi.h | 4 +
>> include/linux/mtd/rawnand.h | 11 +
>> include/linux/mtd/spi-nor.h | 43 +-
>> include/linux/of.h | 333 ++
>> include/linux/phy/phy-zynqmp.h | 60 +
>> include/linux/remoteproc.h | 6 +
>> include/linux/soc/xilinx/zynqmp/fw.h | 37 +
>> include/linux/soc/xilinx/zynqmp/tap_delays.h | 32 +
>> include/linux/spi/spi.h | 23 +-
>> include/linux/usb/chipidea.h | 1 +
>> include/linux/usb/xhci_pdriver.h | 29 +
>> include/linux/xilinx_phy.h | 20 +
>> include/media/media-entity.h | 8 +
>> include/media/v4l2-subdev.h | 4 +
>> include/soc/xilinx/xlnx_vcu.h | 39 +
>> include/uapi/drm/drm_fourcc.h | 15 +
>> include/uapi/drm/drm_mode.h | 2 +
>> include/uapi/linux/if_alg.h | 1 +
>> include/uapi/linux/media-bus-format.h | 16 +-
>> include/uapi/linux/uio/uio.h | 65 +
>> include/uapi/linux/v4l2-mediabus.h | 3 +
>> include/uapi/linux/v4l2-subdev.h | 23 +
>> include/uapi/linux/videodev2.h | 29 +-
>> include/uapi/linux/xilinx-csi2rxss.h | 18 +
>> include/uapi/linux/xilinx-hls.h | 21 +
>> include/uapi/linux/xilinx-sdirxss.h | 66 +
>> include/uapi/linux/xilinx-v4l2-controls.h | 141 +
>> include/uapi/linux/xilinx-v4l2-events.h | 24 +
>> include/uapi/linux/xlnx_ctrl.h | 34 +
>> include/uapi/linux/xlnxsync.h | 111 +
>> include/uapi/linux/zocl_ioctl.h | 125 +
>> include/uapi/misc/xilinx_sdfec.h | 470 ++
>> mm/page_alloc.c | 2 +-
>> samples/xilinx_apm/Makefile | 71 +
>> samples/xilinx_apm/main.c | 134 +
>> samples/xilinx_apm/xaxipmon.c | 1269 +++++
>> samples/xilinx_apm/xaxipmon.h | 943 ++++
>> sound/soc/xilinx/Kconfig | 35 +
>> sound/soc/xilinx/Makefile | 6 +
>> sound/soc/xilinx/xilinx-dp-card.c | 111 +
>> sound/soc/xilinx/xilinx-dp-codec.c | 178 +
>> sound/soc/xilinx/xilinx-dp-pcm.c | 76 +
>> sound/soc/xilinx/xlnx_formatter_pcm.c | 226 +-
>> sound/soc/xilinx/xlnx_i2s.c | 115 +-
>> sound/soc/xilinx/xlnx_pl_snd_card.c | 432 ++
>> sound/soc/xilinx/xlnx_sdi_audio.c | 610 +++
>> sound/soc/xilinx/xlnx_snd_common.h | 23 +
>> 651 files changed, 151098 insertions(+), 3530 deletions(-)
>> create mode 100644 Documentation/ABI/stable/sysfs-firmware-zynqmp
>> create mode 100644 Documentation/ABI/testing/sysfs-driver-cortexa53-edac
>> create mode 100644 Documentation/devicetree/bindings/arm/zynq/zynq-efuse.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/zynq/zynq-ocmc.txt
>> create mode 100644 Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt
>> create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5324.txt
>> create mode 100644 Documentation/devicetree/bindings/clock/xlnx,versal-clk.txt
>> create mode 100644 Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
>> create mode 100644 Documentation/devicetree/bindings/crypto/zynqmp-rsa.txt
>> create mode 100644 Documentation/devicetree/bindings/crypto/zynqmp-sha.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/bridge.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,mixer.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,pl-disp.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,sdi-tx.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,vpss-csc.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,vpss-scaler.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,vtc.txt
>> create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/axi-cdma.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/axi-dma.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/ps-pcie-dma.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/vdmatest.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_dpdma.txt
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_frmbuf.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/cresample.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dp.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dp_sub.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dsi.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/osd.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/rgb2ycrcb.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/sdi.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/vtc.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/xilinx/xilinx_drm.txt
>> create mode 100644 Documentation/devicetree/bindings/drm/zocl/zocl_drm.txt
>> create mode 100644 Documentation/devicetree/bindings/edac/cortex-arm64-edac.txt
>> create mode 100644 Documentation/devicetree/bindings/edac/pl310_edac_l2.txt
>> create mode 100644 Documentation/devicetree/bindings/edac/zynqmp_ocm_edac.txt
>> create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,afi-fpga.txt
>> create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.txt
>> create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-ams.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/xilinx,intc.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,mem2mem.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-axi4s-switch.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-cfa.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-cresample.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-demosaic.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-gamma-lut.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-hls.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-multi-scaler.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-remapper.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-rgb2yuv.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-scaler.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-scd.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-switch.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-vpss-csc.txt
>> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,v-vpss-scaler.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/jesd-phy.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/jesd204b.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/xilinx-axitrafgen.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/xlnx,fclk.txt
>> create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
>> create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nand.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx-phy.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx-tsn-ethernet.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx_emaclite.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx_tsn.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx_tsn_ep.txt
>> create mode 100644 Documentation/devicetree/bindings/net/xilinx_tsn_switch.txt
>> create mode 100644 Documentation/devicetree/bindings/pci/xilinx-xdma-pl-pcie.txt
>> create mode 100644 Documentation/devicetree/bindings/phy/phy-zynqmp.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.txt
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/zynq_remoteproc.txt
>> create mode 100644 Documentation/devicetree/bindings/serial/uartlite.c
>> create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,ai-engine-npi.txt
>> create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,ai_engine.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/xlnx,dp-snd-card.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/xlnx,dp-snd-codec.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/xlnx,dp-snd-pcm.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/xlnx,v-uhdsdi-audio.txt
>> create mode 100644 Documentation/devicetree/bindings/staging/xroeframer/xroeframer.txt
>> create mode 100644 Documentation/devicetree/bindings/staging/xroetrafficgen/xroetrafficgen.txt
>> create mode 100644 Documentation/devicetree/bindings/uio/xilinx_apm.txt
>> create mode 100644 Documentation/devicetree/bindings/usb/ehci-xilinx.txt
>> create mode 100644 Documentation/devicetree/bindings/video/xilinx-fb.txt
>> create mode 100644 Documentation/devicetree/bindings/xlnx,ctrl-fb.txt
>> create mode 100644 Documentation/devicetree/bindings/xlnx,ctrl-vpss.txt
>> create mode 100644 Documentation/devicetree/configfs-overlays.txt
>> create mode 100644 Documentation/misc-devices/xilinx_sdfec.rst
>> create mode 100644 Documentation/misc-devices/xilinx_trafgen.txt
>> create mode 100644 arch/arm/configs/xilinx_zynq_defconfig
>> create mode 100644 arch/arm/mach-zynq/efuse.c
>> create mode 100644 arch/arm/mach-zynq/suspend.S
>> create mode 100644 arch/arm/mach-zynq/zynq_ocm.c
>> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
>> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revB.dts
>> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
>> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu1285-revA.dts
>> create mode 100644 arch/arm64/configs/xilinx_versal_defconfig
>> create mode 100644 arch/arm64/configs/xilinx_zynqmp_defconfig
>> create mode 100644 drivers/clk/clk-si5324.c
>> create mode 100644 drivers/clk/clk-si5324.h
>> create mode 100644 drivers/clk/idt/Makefile
>> create mode 100644 drivers/clk/idt/clk-idt8t49n24x-core.c
>> create mode 100644 drivers/clk/idt/clk-idt8t49n24x-core.h
>> create mode 100644 drivers/clk/idt/clk-idt8t49n24x-debugfs.c
>> create mode 100644 drivers/clk/idt/clk-idt8t49n24x-debugfs.h
>> create mode 100644 drivers/clk/idt/clk-idt8t49n24x.c
>> create mode 100644 drivers/clk/si5324.h
>> create mode 100644 drivers/clk/si5324drv.c
>> create mode 100644 drivers/clk/si5324drv.h
>> create mode 100644 drivers/crypto/zynqmp-aes.c
>> create mode 100644 drivers/crypto/zynqmp-rsa.c
>> create mode 100644 drivers/crypto/zynqmp-sha.c
>> create mode 100644 drivers/dma/xilinx/Kconfig
>> create mode 100644 drivers/dma/xilinx/axidmatest.c
>> create mode 100644 drivers/dma/xilinx/cdmatest.c
>> create mode 100644 drivers/dma/xilinx/vdmatest.c
>> create mode 100644 drivers/dma/xilinx/xilinx_dpdma.c
>> create mode 100644 drivers/dma/xilinx/xilinx_frmbuf.c
>> create mode 100644 drivers/dma/xilinx/xilinx_ps_pcie.h
>> create mode 100644 drivers/dma/xilinx/xilinx_ps_pcie_dma_client.c
>> create mode 100644 drivers/dma/xilinx/xilinx_ps_pcie_main.c
>> create mode 100644 drivers/dma/xilinx/xilinx_ps_pcie_platform.c
>> create mode 100644 drivers/edac/cortex_arm64_edac.c
>> create mode 100644 drivers/edac/pl310_edac_l2.c
>> create mode 100644 drivers/edac/zynqmp_ocm_edac.c
>> create mode 100644 drivers/firmware/xilinx/zynqmp-ggs.c
>> create mode 100644 drivers/firmware/xilinx/zynqmp-secure.c
>> create mode 100644 drivers/fpga/versal-fpga.c
>> create mode 100644 drivers/fpga/xilinx-afi.c
>> create mode 100644 drivers/fpga/zynq-afi.c
>> create mode 100644 drivers/gpu/drm/xilinx/Kconfig
>> create mode 100644 drivers/gpu/drm/xilinx/Makefile
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_cresample.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_cresample.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_connector.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_connector.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_crtc.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_dp.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_dp_sub.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_dp_sub.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_drv.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_drv.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_dsi.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_encoder.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_encoder.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_fb.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_fb.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_gem.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_gem.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_plane.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_plane.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_sdi.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_drm_sdi.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_osd.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_osd.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_rgb2yuv.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_rgb2yuv.h
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_vtc.c
>> create mode 100644 drivers/gpu/drm/xilinx/xilinx_vtc.h
>> create mode 100644 drivers/gpu/drm/xlnx/Kconfig
>> create mode 100644 drivers/gpu/drm/xlnx/Makefile
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_bridge.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_bridge.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_crtc.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_crtc.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_csc.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_drv.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_drv.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_fb.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_fb.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_gem.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_gem.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_mixer.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_pl_disp.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_scaler.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_sdi.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_sdi_modes.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_sdi_timing.c
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_sdi_timing.h
>> create mode 100644 drivers/gpu/drm/xlnx/xlnx_vtc.c
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_disp.c
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_disp.h
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.c
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.h
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dpsub.c
>> create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dpsub.h
>> create mode 100644 drivers/gpu/drm/zocl/Kconfig
>> create mode 100644 drivers/gpu/drm/zocl/Makefile
>> create mode 100644 drivers/gpu/drm/zocl/zocl_bo.c
>> create mode 100644 drivers/gpu/drm/zocl/zocl_drv.c
>> create mode 100644 drivers/gpu/drm/zocl/zocl_drv.h
>> create mode 100644 drivers/iio/adc/xilinx-ams.c
>> create mode 100644 drivers/iio/adc/xilinx-ams.h
>> create mode 100644 drivers/media/platform/xilinx/xilinx-axis-switch.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-cfa.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-cresample.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-csi2rxss.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-demosaic.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-gamma-coeff.h
>> create mode 100644 drivers/media/platform/xilinx/xilinx-gamma.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-hls-common.h
>> create mode 100644 drivers/media/platform/xilinx/xilinx-hls.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-m2m.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-multi-scaler-coeff.h
>> create mode 100644 drivers/media/platform/xilinx/xilinx-multi-scaler.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-remapper.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-rgb2yuv.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-scaler.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-scenechange-channel.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-scenechange-dma.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-scenechange.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-scenechange.h
>> create mode 100644 drivers/media/platform/xilinx/xilinx-sdirxss.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-switch.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-vpss-csc.c
>> create mode 100644 drivers/media/platform/xilinx/xilinx-vpss-scaler.c
>> create mode 100644 drivers/misc/jesd204b/Kconfig
>> create mode 100644 drivers/misc/jesd204b/Makefile
>> create mode 100644 drivers/misc/jesd204b/gtx7s_cpll_bands.c
>> create mode 100644 drivers/misc/jesd204b/gtx7s_cpll_bands.h
>> create mode 100644 drivers/misc/jesd204b/gtx7s_qpll_bands.c
>> create mode 100644 drivers/misc/jesd204b/gtx7s_qpll_bands.h
>> create mode 100644 drivers/misc/jesd204b/jesd_phy.c
>> create mode 100644 drivers/misc/jesd204b/jesd_phy.h
>> create mode 100644 drivers/misc/jesd204b/s7_gtxe2_drp.h
>> create mode 100644 drivers/misc/jesd204b/xilinx_jesd204b.c
>> create mode 100644 drivers/misc/jesd204b/xilinx_jesd204b.h
>> create mode 100644 drivers/misc/xilinx_sdfec.c
>> create mode 100644 drivers/misc/xilinx_trafgen.c
>> create mode 100644 drivers/mtd/nand/raw/arasan_nand.c
>> create mode 100644 drivers/mtd/nand/raw/pl353_nand.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_axienet_dma.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_axienet_mcdma.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_cb.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_ep.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_preemption.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_preemption.h
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_ptp.h
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_ptp_clock.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_ptp_xmit.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_qci.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_shaper.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_shaper.h
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_switch.c
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_switch.h
>> create mode 100644 drivers/net/ethernet/xilinx/xilinx_tsn_timer.h
>> create mode 100644 drivers/net/phy/xilinx_phy.c
>> create mode 100644 drivers/of/configfs.c
>> create mode 100644 drivers/pci/controller/pcie-xdma-pl.c
>> create mode 100644 drivers/phy/phy-zynqmp.c
>> create mode 100644 drivers/pinctrl/pinctrl-zynqmp.c
>> create mode 100644 drivers/remoteproc/zynq_remoteproc.c
>> create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
>> create mode 100644 drivers/soc/xilinx/xlnx_vcu_clk.c
>> create mode 100644 drivers/soc/xilinx/xlnx_vcu_core.c
>> create mode 100644 drivers/soc/xilinx/zynqmp/Makefile
>> create mode 100644 drivers/soc/xilinx/zynqmp/tap_delays.c
>> create mode 100644 drivers/staging/apf/Kconfig
>> create mode 100644 drivers/staging/apf/Makefile
>> create mode 100644 drivers/staging/apf/dt-binding.txt
>> create mode 100644 drivers/staging/apf/xilinx-dma-apf.c
>> create mode 100644 drivers/staging/apf/xilinx-dma-apf.h
>> create mode 100644 drivers/staging/apf/xlnk-eng.c
>> create mode 100644 drivers/staging/apf/xlnk-eng.h
>> create mode 100644 drivers/staging/apf/xlnk-ioctl.h
>> create mode 100644 drivers/staging/apf/xlnk-sysdef.h
>> create mode 100644 drivers/staging/apf/xlnk.c
>> create mode 100644 drivers/staging/apf/xlnk.h
>> create mode 100644 drivers/staging/fclk/Kconfig
>> create mode 100644 drivers/staging/fclk/Makefile
>> create mode 100644 drivers/staging/fclk/TODO
>> create mode 100644 drivers/staging/fclk/dt-binding.txt
>> create mode 100644 drivers/staging/fclk/xilinx_fclk.c
>> create mode 100644 drivers/staging/xlnx_ctrl_driver/Kconfig
>> create mode 100644 drivers/staging/xlnx_ctrl_driver/MAINTAINERS
>> create mode 100644 drivers/staging/xlnx_ctrl_driver/Makefile
>> create mode 100644 drivers/staging/xlnx_ctrl_driver/xlnx_frmb.c
>> create mode 100644 drivers/staging/xlnx_ctrl_driver/xlnx_vpss.c
>> create mode 100644 drivers/staging/xlnx_ernic/Kconfig
>> create mode 100644 drivers/staging/xlnx_ernic/MAINTAINERS
>> create mode 100644 drivers/staging/xlnx_ernic/Makefile
>> create mode 100644 drivers/staging/xlnx_ernic/dt-binding.txt
>> create mode 100644 drivers/staging/xlnx_ernic/xcm.c
>> create mode 100644 drivers/staging/xlnx_ernic/xcm.h
>> create mode 100644 drivers/staging/xlnx_ernic/xcommon.h
>> create mode 100644 drivers/staging/xlnx_ernic/xernic_bw_test.c
>> create mode 100644 drivers/staging/xlnx_ernic/xhw_config.h
>> create mode 100644 drivers/staging/xlnx_ernic/xhw_def.h
>> create mode 100644 drivers/staging/xlnx_ernic/xif.h
>> create mode 100644 drivers/staging/xlnx_ernic/xioctl.h
>> create mode 100644 drivers/staging/xlnx_ernic/xmain.c
>> create mode 100644 drivers/staging/xlnx_ernic/xmain.h
>> create mode 100644 drivers/staging/xlnx_ernic/xmr.c
>> create mode 100644 drivers/staging/xlnx_ernic/xmr.h
>> create mode 100644 drivers/staging/xlnx_ernic/xperftest.h
>> create mode 100644 drivers/staging/xlnx_ernic/xqp.c
>> create mode 100644 drivers/staging/xlnx_ernic/xqp.h
>> create mode 100644 drivers/staging/xlnx_ernic/xrocev2.h
>> create mode 100644 drivers/staging/xlnxsync/Kconfig
>> create mode 100644 drivers/staging/xlnxsync/MAINTAINERS
>> create mode 100644 drivers/staging/xlnxsync/Makefile
>> create mode 100644 drivers/staging/xlnxsync/dt-binding.txt
>> create mode 100644 drivers/staging/xlnxsync/xlnxsync.c
>> create mode 100644 drivers/staging/xroeframer/Kconfig
>> create mode 100644 drivers/staging/xroeframer/Makefile
>> create mode 100644 drivers/staging/xroeframer/README
>> create mode 100644 drivers/staging/xroeframer/roe_framer_ctrl.h
>> create mode 100644 drivers/staging/xroeframer/sysfs_xroe.c
>> create mode 100644 drivers/staging/xroeframer/sysfs_xroe_framer_ipv4.c
>> create mode 100644 drivers/staging/xroeframer/sysfs_xroe_framer_ipv6.c
>> create mode 100644 drivers/staging/xroeframer/sysfs_xroe_framer_stats.c
>> create mode 100644 drivers/staging/xroeframer/sysfs_xroe_framer_udp.c
>> create mode 100644 drivers/staging/xroeframer/xroe_framer.c
>> create mode 100644 drivers/staging/xroeframer/xroe_framer.h
>> create mode 100644 drivers/staging/xroetrafficgen/Kconfig
>> create mode 100644 drivers/staging/xroetrafficgen/Makefile
>> create mode 100644 drivers/staging/xroetrafficgen/README
>> create mode 100644 drivers/staging/xroetrafficgen/roe_radio_ctrl.h
>> create mode 100644 drivers/staging/xroetrafficgen/xroe-traffic-gen-sysfs.c
>> create mode 100644 drivers/staging/xroetrafficgen/xroe-traffic-gen.c
>> create mode 100644 drivers/staging/xroetrafficgen/xroe-traffic-gen.h
>> create mode 100644 drivers/uio/uio_dmabuf.c
>> create mode 100644 drivers/uio/uio_dmabuf.h
>> create mode 100644 drivers/uio/uio_xilinx_ai_engine.c
>> create mode 100644 drivers/uio/uio_xilinx_apm.c
>> create mode 100644 drivers/usb/dwc3/gadget_hibernation.c
>> create mode 100644 drivers/usb/dwc3/otg.c
>> create mode 100644 drivers/usb/dwc3/otg.h
>> create mode 100644 drivers/usb/dwc3/platform_data.h
>> create mode 100644 include/dt-bindings/clock/xlnx-versal-clk.h
>> create mode 100644 include/dt-bindings/drm/mipi-dsi.h
>> create mode 100644 include/dt-bindings/pinctrl/pinctrl-zynqmp.h
>> create mode 100644 include/dt-bindings/power/xlnx-versal-power.h
>> create mode 100644 include/linux/dma/xilinx_frmbuf.h
>> create mode 100644 include/linux/dma/xilinx_ps_pcie_dma.h
>> create mode 100644 include/linux/phy/phy-zynqmp.h
>> create mode 100644 include/linux/soc/xilinx/zynqmp/fw.h
>> create mode 100644 include/linux/soc/xilinx/zynqmp/tap_delays.h
>> create mode 100644 include/linux/usb/xhci_pdriver.h
>> create mode 100644 include/linux/xilinx_phy.h
>> create mode 100644 include/soc/xilinx/xlnx_vcu.h
>> create mode 100644 include/uapi/linux/uio/uio.h
>> create mode 100644 include/uapi/linux/xilinx-csi2rxss.h
>> create mode 100644 include/uapi/linux/xilinx-hls.h
>> create mode 100644 include/uapi/linux/xilinx-sdirxss.h
>> create mode 100644 include/uapi/linux/xilinx-v4l2-events.h
>> create mode 100644 include/uapi/linux/xlnx_ctrl.h
>> create mode 100644 include/uapi/linux/xlnxsync.h
>> create mode 100644 include/uapi/linux/zocl_ioctl.h
>> create mode 100644 include/uapi/misc/xilinx_sdfec.h
>> create mode 100644 samples/xilinx_apm/Makefile
>> create mode 100644 samples/xilinx_apm/main.c
>> create mode 100644 samples/xilinx_apm/xaxipmon.c
>> create mode 100644 samples/xilinx_apm/xaxipmon.h
>> create mode 100644 sound/soc/xilinx/xilinx-dp-card.c
>> create mode 100644 sound/soc/xilinx/xilinx-dp-codec.c
>> create mode 100644 sound/soc/xilinx/xilinx-dp-pcm.c
>> create mode 100644 sound/soc/xilinx/xlnx_pl_snd_card.c
>> create mode 100644 sound/soc/xilinx/xlnx_sdi_audio.c
>> create mode 100644 sound/soc/xilinx/xlnx_snd_common.h
>> --
>> 2.17.1
>>
>
> --
> - Thou shalt not follow the NULL pointer, for chaos and madness await
> thee at its end
> - "Use the force Harry" - Gandalf, Star Trek II
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/linux-yocto/attachments/20190709/a53f543d/attachment-0001.html>
More information about the linux-yocto
mailing list