[linux-yocto] [linux-yocto-dev standard/xlnx-soc][PATCH 0/2] xilinx-zynqmp: fix 2 issues in zcu102 Rev1.0 board

[qwang2]

On 7/22/19 11:34 PM, Bruce Ashfield wrote:
> On Mon, Jul 22, 2019 at 1:24 AM <quanyang.wang at windriver.com> wrote:
>> From: Quanyang Wang <quanyang.wang at windriver.com>
>>
>> Hi Bruce,
>>
>> Would you please help merge these 2 patches to linux-yocto-dev standard/xlnx-soc branch?
> I've merged the patches.
>
> Also note: I'm about to move linux-yocto-dev to v5.3-rc1, so I've
> created a set of v5.2 branches in the main linux-yocto repository, and
> I have merged the xlnx-soc work there.
>
> So if you can try switching to:
>
> https://git.yoctoproject.org/cgit/cgit.cgi/linux-yocto/log/?h=v5.2/standard/xlnx-soc
>
> The content is the same as the linux-yocto-dev branch.
>
> I'm going to generate linux-yocto_5.2 recipes shortly, but they aren't
> quite ready yet. Contact me if you have trouble building that branch
> without the recipes and I  can send you the in progress ones.
>
> Also, if you do a port to 5.3, let me know and we can re-establish the
> branch in linux-yocto-dev.

Hi Bruce,

I will do a port to 5.3.  But before I finish porting, I hope we can 
retain the branch standard/xlnx-soc

and don't delete it.

Thanks,

Quanyang

>
> Bruce
>
>>
>> Limeng (1):
>>    driver: pcie: reset pcie device with MIO31 on xilinx-zcu102 platform
>>
>> Quanyang Wang (1):
>>    drm: xlnx: zynqmp_dp: initialize delayed work before enable interrupts
>>
>>   .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  1 +
>>   drivers/gpu/drm/xlnx/zynqmp_dp.c              |  3 +-
>>   drivers/pci/controller/pcie-xilinx-nwl.c      | 35 +++++++++++++++++++
>>   3 files changed, 38 insertions(+), 1 deletion(-)
>>
>> --
>> 2.17.1
>>
>