[linux-yocto] [linux-yocto-dev standard/xlnx-soc][PATCH 0/2] xilinx-zynqmp: fix 2 issues in zcu102 Rev1.0 board

[qwang2]

On 7/23/19 8:41 PM, Bruce Ashfield wrote:
> On Tue, Jul 23, 2019 at 1:29 AM qwang2 <quanyang.wang at windriver.com> wrote:
>>
>> On 7/22/19 11:34 PM, Bruce Ashfield wrote:
>>> On Mon, Jul 22, 2019 at 1:24 AM <quanyang.wang at windriver.com> wrote:
>>>> From: Quanyang Wang <quanyang.wang at windriver.com>
>>>>
>>>> Hi Bruce,
>>>>
>>>> Would you please help merge these 2 patches to linux-yocto-dev standard/xlnx-soc branch?
>>> I've merged the patches.
>>>
>>> Also note: I'm about to move linux-yocto-dev to v5.3-rc1, so I've
>>> created a set of v5.2 branches in the main linux-yocto repository, and
>>> I have merged the xlnx-soc work there.
>>>
>>> So if you can try switching to:
>>>
>>> https://git.yoctoproject.org/cgit/cgit.cgi/linux-yocto/log/?h=v5.2/standard/xlnx-soc
>>>
>>> The content is the same as the linux-yocto-dev branch.
>>>
>>> I'm going to generate linux-yocto_5.2 recipes shortly, but they aren't
>>> quite ready yet. Contact me if you have trouble building that branch
>>> without the recipes and I  can send you the in progress ones.
>>>
>>> Also, if you do a port to 5.3, let me know and we can re-establish the
>>> branch in linux-yocto-dev.
>> Hi Bruce,
>>
>> I will do a port to 5.3.  But before I finish porting, I hope we can
>> retain the branch standard/xlnx-soc
> I have 5.3-rc1 building and booting with the base set of features now.
>
> Is there a reason why the branch I created in linux-yocto/5.2 won't
> work while you are doing the port ? I'd like to push the 5.3 kernel
> changes in the next day or so, and they will clobber that branch.

Hi Bruce,

For me, I plan to begin porting to 5.3 after I fix bugs and enable the 
remaining

features. So I hope to maintain this branch in linux-yocto-dev but not 
only linux-yocto.

But if retaining this branch bring inconvience, you can delete it.

I will switch to linux-yocto/5.2 to do the fixing bug.

Thanks,

Quanyang

>
> Bruce
>
>> and don't delete it.
>>
>> Thanks,
>>
>> Quanyang
>>
>>> Bruce
>>>
>>>> Limeng (1):
>>>>     driver: pcie: reset pcie device with MIO31 on xilinx-zcu102 platform
>>>>
>>>> Quanyang Wang (1):
>>>>     drm: xlnx: zynqmp_dp: initialize delayed work before enable interrupts
>>>>
>>>>    .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  1 +
>>>>    drivers/gpu/drm/xlnx/zynqmp_dp.c              |  3 +-
>>>>    drivers/pci/controller/pcie-xilinx-nwl.c      | 35 +++++++++++++++++++
>>>>    3 files changed, 38 insertions(+), 1 deletion(-)
>>>>
>>>> --
>>>> 2.17.1
>>>>
>
>