[linux-yocto] : [kernel v5.2/standard/bcm-2xxx-rpi]: bcm-2xxx-rpi: add patches for improving raspberrypi 4b platform
Bruce Ashfield
bruce.ashfield at gmail.com
Thu Sep 19 21:42:22 PDT 2019
In message: [linux-yocto]: [kernel v5.2/standard/bcm-2xxx-rpi]: bcm-2xxx-rpi: add patches for improving raspberrypi 4b platform
on 17/09/2019 Meng.Li at windriver.com wrote:
> From: Limeng <Meng.Li at windriver.com>
>
> Hi Bruce,
>
> I am working on BSP bcm-2xxx-rpi platform, and intend to merge this BSP supporting into yocto community.
> Some days ago, I submit a pull request for this BSP.
> Now, there are still 81 below patches for improve this BSP
>
> Could you please help to merge the 81 patches into linux-ycoto-5.2 kernel, branch v5.2/standard/bcm-2xxx-rpi?
I've pulled the branch into linux-yocto v5.2/standard/bcm-2xxx-rpi.
I assume that this branch contains the contents of your other pull request as
well, so I haven't done anything more that fetch and merge what you have
in this request.
If that is not correct, send more patches and pull requests to the list.
Bruce
>
>
> The following changes since commit 69ce9ac46cd152ce73456e8cca5520e3cb0d6157:
>
> build/arm64: Add rules for .dtbo files for dts overlays (2019-09-16 14:50:55 +0800)
>
> are available in the Git repository at:
>
> https://github.com/limeng-linux/linux-yocto-5.2.git v5.2/standard/bcm-2xxx-rpi
>
> for you to fetch changes up to 4b7ea76eac44bb3d07b53d24cbe578c47a074b93:
>
> arm64: dma-mapping: Fix IOMMU breakage (2019-09-17 18:49:42 +0800)
>
> ----------------------------------------------------------------
> Aman Gupta (2):
> staging: bcm2835-codec: add support for V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME
> staging: bcm2835-codec: remove unnecessary padding on encoder input
>
> Chen-Yu Tsai (3):
> staging: bcm2835-codec: switch to multi-planar API
> staging: bcm2835-codec: implement V4L2_CID_MIN_BUFFERS_FOR_CAPTURE
> staging: bcm2835-codec: set device_caps in struct video_device
>
> Dave Stevenson (24):
> staging: bcm2835_camera: Ensure all buffers are returned on disable
> drm/vc4: Query firmware for custom HDMI mode
> drm/vc4: Pass the drm vrefresh to the firmware on mode set
> drm/vc4: Add support for margins to fkms
> drm/vc4: Ensure zpos is always initialised
> drm/vc4: Add "Broadcast RGB" connector property
> drm/vc4: fkms: Set default state margin at reset
> drm/modes: Don't apply cmdline's rotation if it wasn't specified
> configs: Add CONFIG_FRAMEBUFFER_CONSOLE_ROTATION to Pi configs
> drm/vc4: Resolve the vblank warnings on mode switching
> drm/vc4: Remove unused mode variable
> staging:bcm2835-codec: Expand logging on format setting
> staging: bcm2835-codec: Correct bytesperline on format changed
> drm/vc4: Add missing NULL check to vc4_crtc_consume_event
> media: dt-bindings: Add binding for the Sony IMX219 sensor
> media: i2c: Add driver for Sony IMX219 sensor
> defconfigs: Add Sony IMX219 driver to RPi defconfigs
> dtoverlays: Add overlay for the Sony IMX219 image sensor.
> overlays: mcp23017: rename the GPIO pins node with the device
> overlays: mcp23017: Add option for not connecting the int GPIO
> v4l2: Add a Greyworld AWB mode.
> staging: bcm2835-camera: Add greyworld AWB mode
> staging: bcm2835-codec: Allow height of 1920.
> staging: bcm2835-codec: Correct g/s_selection API MPLANE support
>
> James Hughes (3):
> Fixup FKMS interrupt handing for non-existent display
> Add HDMI1 facility to the driver.
> drm/vc4: Fix for margins in composite/SDTV mode (#3223)
>
> Joerg Schambacher (1):
> adds the Hifiberry DAC+ADC PRO version
>
> Jonathan Bell (3):
> dts: bcm2838: add missing properties for pmu and gic nodes
> hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
> xhci: Use more event ring segment table entries
>
> Jörg Schambacher (1):
> Add Hifiberry DAC+DSP soundcard driver (#3224)
>
> Kieran Bingham (7):
> staging: bcm2835-codec: Fix non-documentation comment block
> staging: bcm2835-codec: Fix declaration of roles
> staging: bcm2835-codec: Add role to device name
> staging: bcm2835-codec: Pass driver context to create entities
> staging: bcm2835-codec: add media controller support
> media: bcm2835: unicam: Reduce scope of local function
> media: bcm2835: unicam: add media controller support
>
> Maxime Ripard (8):
> drm/connector: Add documentation for drm_cmdline_mode
> drm/modes: Rewrite the command line parser
> drm/modes: Support modes names on the command line
> drm/modes: Allow to specify rotation and reflection on the commandline
> drm/connector: Introduce a TV margins structure
> drm/modes: Parse overscan properties
> drm/atomic: Add a function to reset connector TV properties
> drm/vc4: hdmi: Set default state margin at reset
>
> P33M (1):
> dwc_otg: use align_buf for small IN control transfers (#3150)
>
> Phil Elwell (20):
> overlays: audremap: Support GPIOs 18 & 19
> drm/vc4: A present but empty dmas disables audio
> overlays: Add audio parameter to vc4-kms-v3d
> overlays: Update the upstream overlay
> can: mcp251x: Allow more time after a reset
> drivers: char: Use correct name for the Raspberry Pi video decoder
> driver: char: rpivid - also support legacy name
> overlays: Add baudrate parameter to i2c3-i2c6
> net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
> configs: Regenerate the defconfigs
> configs: Enable building the DS28E17 driver module
> ARM: dts: bcm2711-rpi-4-b: I2C aliases and pulls
> configs: arm64/vcm2711: Enable V3D
> overlays: sc16ic752-i2c: Fix xtal parameter
> arch/arm: Add model string to cpuinfo
> arch/arm64: Add Revision, Serial, Model to cpuinfo
> configs: Add GPIO_PCA953X, LEDS_PCA9532/PCA955X
> configs: Set VIDEO_V4L2_SUBDEV_API=y on arm64/bcm2711
> arm/dts: Give v3dbus a 16GB DMA address range
> arm64: dma-mapping: Fix IOMMU breakage
>
> Trevor Stiles (1):
> Add support for the Audio Injector Ultra in 64-bit land.
>
> Yaroslav Rosomakho (2):
> Limit max_req_size under arm64 (or any other platform that uses swiotlb) to prevent potential buffer overflow due to bouncing.
> Add missing dma_unmap_sg calls to free relevant swiotlb bounce buffers. This prevents DMA leaks.
>
> allo-com (1):
> codecs: Correct Katana minimum volume
>
> popcornmix (2):
> vc-sm-cma: Fix compatibility ioctl
> configs: Add TINYDRM modules
>
> yaroslavros (1):
> Ported pcie-brcmstb bounce buffer implementation to ARM64. (#3144)
>
> Álvaro Fernández Rojas (1):
> arm: dts: add missing Raspberry Pi model names
>
> Documentation/devicetree/bindings/media/i2c/imx219.txt | 59 ++++++
> Documentation/fb/modedb.txt | 14 ++
> arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 +
> arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 +
> arch/arm/boot/dts/bcm2708-rpi-cm.dts | 1 +
> arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 1 +
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 10 ++
> arch/arm/boot/dts/bcm2838.dtsi | 31 ++--
> arch/arm/boot/dts/overlays/Makefile | 3 +
> arch/arm/boot/dts/overlays/README | 53 +++++-
> arch/arm/boot/dts/overlays/audremap-overlay.dts | 16 ++
> arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts | 64 +++++++
> arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts | 34 ++++
> arch/arm/boot/dts/overlays/i2c3-overlay.dts | 15 +-
> arch/arm/boot/dts/overlays/i2c4-overlay.dts | 15 +-
> arch/arm/boot/dts/overlays/i2c5-overlay.dts | 15 +-
> arch/arm/boot/dts/overlays/i2c6-overlay.dts | 15 +-
> arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 +++++++++++++
> arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 25 ++-
> arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +-
> arch/arm/boot/dts/overlays/upstream-overlay.dts | 6 +
> arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 8 +
> arch/arm/configs/bcm2709_defconfig | 14 +-
> arch/arm/configs/bcm2711_defconfig | 26 ++-
> arch/arm/configs/bcmrpi_defconfig | 12 ++
> arch/arm/kernel/setup.c | 10 ++
> arch/arm64/configs/bcm2711_defconfig | 17 +-
> arch/arm64/configs/bcmrpi3_defconfig | 6 +
> arch/arm64/kernel/cpuinfo.c | 25 +++
> arch/arm64/mm/dma-mapping.c | 92 +++++++++-
> drivers/char/broadcom/Kconfig | 8 +-
> drivers/char/broadcom/Makefile | 2 +-
> drivers/char/broadcom/{argon-mem.c => rpivid-mem.c} | 125 +++++++------
> drivers/gpu/drm/drm_atomic_state_helper.c | 18 ++
> drivers/gpu/drm/drm_connector.c | 3 +-
> drivers/gpu/drm/drm_fb_helper.c | 34 ++++
> drivers/gpu/drm/drm_modes.c | 473 ++++++++++++++++++++++++++++++++++++------------
> drivers/gpu/drm/v3d/Kconfig | 2 +-
> drivers/gpu/drm/vc4/vc4_firmware_kms.c | 631 +++++++++++++++++++++++++++++++++++++++++++++++++---------------
> drivers/gpu/drm/vc4/vc4_hdmi.c | 14 +-
> drivers/hid/hid-ids.h | 6 +
> drivers/hid/hid-quirks.c | 2 +
> drivers/media/i2c/Kconfig | 11 ++
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/imx219.c | 1093 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/media/platform/bcm2835/Kconfig | 2 +-
> drivers/media/platform/bcm2835/bcm2835-unicam.c | 48 ++++-
> drivers/media/v4l2-core/v4l2-ctrls.c | 1 +
> drivers/mfd/bcm2835-pm.c | 12 +-
> drivers/mmc/host/bcm2835-mmc.c | 21 ++-
> drivers/net/can/spi/mcp251x.c | 15 +-
> drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 +
> drivers/pci/controller/Makefile | 3 +
> drivers/pci/controller/pcie-brcmstb-bounce.h | 2 +-
> drivers/pci/controller/pcie-brcmstb-bounce64.c | 568 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/controller/pcie-brcmstb.c | 30 +---
> drivers/soc/bcm/bcm2835-power.c | 6 +-
> drivers/staging/vc04_services/bcm2835-audio/bcm2835.c | 29 ++-
> drivers/staging/vc04_services/bcm2835-audio/bcm2835.h | 4 +-
> drivers/staging/vc04_services/bcm2835-camera/controls.c | 8 +-
> drivers/staging/vc04_services/bcm2835-codec/Kconfig | 2 +-
> drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 320 ++++++++++++++++++++++-----------
> drivers/staging/vc04_services/vc-sm-cma/vc_sm.c | 12 +-
> drivers/staging/vc04_services/vchiq-mmal/mmal-parameters.h | 1 +
> drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c | 2 +
> drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 18 ++
> drivers/usb/host/xhci-mem.c | 8 +-
> drivers/usb/host/xhci.h | 4 +-
> include/drm/drm_atomic_state_helper.h | 1 +
> include/drm/drm_connector.h | 149 +++++++++++++--
> include/linux/mfd/bcm2835-pm.h | 2 +-
> include/uapi/linux/v4l2-controls.h | 1 +
> sound/soc/bcm/Kconfig | 15 ++
> sound/soc/bcm/Makefile | 4 +
> sound/soc/bcm/allo-katana-codec.c | 2 +-
> sound/soc/bcm/hifiberry_dacplusadcpro.c | 538 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> sound/soc/bcm/hifiberry_dacplusdsp.c | 90 ++++++++++
> sound/soc/bcm/rpi-simple-soundcard.c | 19 ++
> 78 files changed, 4520 insertions(+), 569 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.txt
> create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts
> rename drivers/char/broadcom/{argon-mem.c => rpivid-mem.c} (66%)
> create mode 100644 drivers/media/i2c/imx219.c
> create mode 100644 drivers/pci/controller/pcie-brcmstb-bounce64.c
> create mode 100644 sound/soc/bcm/hifiberry_dacplusadcpro.c
> create mode 100644 sound/soc/bcm/hifiberry_dacplusdsp.c
>
>
>
> thanks,
> Limeng
More information about the linux-yocto
mailing list