[meta-freescale] Nitrogen6x w/ OV5642

[Eric Nelson]

Hi Sébastien,

Is this the first time you've used the module?

If so, I suspect a cabling issue. The flex connectors can
be a pain to get right the first time:

Theres a photo here of how the cables should be connected
to Nitrogen6X (i.e. blue side up):
	http://boundarydevices.com/wp-content/uploads/2012/05/Camera-to-6X-Small.jpg

I'll try to get a Dylan image built, but that may bleed into
next week, since I'm taking a few days off.

Please advise,


Eric

On 05/22/2013 04:56 PM, Sébastien Taylor wrote:
> MFW_GST_V4LSRC_PLUGIN 3.0.5 build on May 21 2013 14:49:13.
>
> Running gst-launch with DEBUG=*:3 shows that the failure is caused by being unable to open /dev/video0 though the device is there.
>
> On 2013-05-22, at 5:01 PM, Eric Nelson <eric.nelson at boundarydevices.com> wrote:
>
>> Hi Sébastien,
>>
>> On 05/22/2013 03:43 PM, Sébastien Taylor wrote:
>>> I'm on the Dylan branch and I've tried withboth the default
>>> linux-boundary kernel as well as updating the .bb to use
>>> the latest 1.1.1 branch from boundary.
>>>
>>> Looks like I'll have to dig a little deeper to see what's causing
>>> mfw_v4lsrc to fail (mfw_v4lsink works fine with a videotestsrc).
>>>
>> Can you check the version of the gstreamer plugins?
>>
>> 	root at nitrogen6x# gst-inspect mfw_v4lsrc | head -n 1
>>
>> Our 1.1.1 branch is confirmed to work with the 3.0.5 package,
>> but I haven't yet pushed a kernel matching the 4.0.0. BSP
>> release (I'm hoping to do some clean up along the way).
>>
>> Please advise,
>>
>>
>> Eric
>>
>