[meta-freescale] IMX53QSB-R can not boot from microSD
jojo
rjiejie at gmail.com
Wed Oct 23 21:46:12 PDT 2013
Hi,
This board is supported by yocto project ?
i use the command "sudo dd if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb bs=1M" to put image in to microSD, and
i use the command "MACHINE=imx53qsb source setup-environment build-imx53qsb"
to create the fsl-image-gui to boot, some error is reported as bellow :
In: serial
Out: serial
Err: serial
CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
Reset cause: POR
Net: FEC
Warning: failed to set MAC address
Hit any key to stop autoboot: 0
MMC: no card present
mmc0(part 0) is current device
MMC: no card present
Booting from net ...
*** ERROR: `ethaddr' not set
*** ERROR: `ethaddr' not set
Wrong Image Format for bootm command
ERROR: can't get kernel image!
i reference the doc "i.MX53_START_Linux_BSP_UserGuide.pdf" to set microSD parameters in boot line as bellow:
MX53LOCO U-Boot > setenv bootargs_base 'setenv bootargs console=ttymxc0,115200'
MX53LOCO U-Boot > setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/mmcblk0p1 rootwait rw video=mxcdi1fb:GBR24,VGA-XGA di1_primary vga'
MX53LOCO U-Boot > setenv bootcmd_mmc 'run bootargs_base bootargs_mmc;mmc dev 0;mmc read ${loadaddr} 0x800 0x1800;bootm'
MX53LOCO U-Boot > setenv bootcmd 'run bootcmd_mmc'
MX53LOCO U-Boot > saveenv
Saving Environment to MMC...
MMC: no card present
MMC init failed
MX53LOCO U-Boot > run bootcmd
MMC: no card present
mmc0(part 0) is current device
MMC read: dev # 0, block # 2048, count 6144 ... MMC: no card present
MMC: block number 0x2000 exceeds max(0x0)
0 blocks read: ERROR
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Anyone have any idea for this issue ?
Thanks,
- Jojo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131024/23f6a429/attachment.html>
More information about the meta-freescale
mailing list