[meta-freescale] 回复: IMX53QSB-R can not boot from microSD
jojo
rjiejie at gmail.com
Thu Oct 24 23:49:31 PDT 2013
Hi,
I rebuild the imx53qsb completely and boot failed also as bellow :
and i do not change anything about for yocto dora except DL_DIR to redirect to "DL_DIR = "${TOPDIR}/../../downloads""
U-Boot 2013.10-rc3 (Oct 25 2013 - 13:28:32)
Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
MMC: no card present
MMC init failed
Using default environment
In: serial
Out: serial
Err: serial
CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
Reset cause: POR
Net: FEC
Warning: failed to set MAC address
Hit any key to stop autoboot: 0
MMC: no card present
mmc0(part 0) is current device
MMC: no card present
Booting from net ...
*** ERROR: `ethaddr' not set
*** ERROR: `ethaddr' not set
Wrong Image Format for bootm command
ERROR: can't get kernel image!
MX53LOCO U-Boot >
BTW, my board is IMX53-START-R
Thanks,
- Jojo
在 2013年10月24日星期四,下午3:13,Eric Bénard 写道:
> Hi Jojo,
>
> Le Thu, 24 Oct 2013 12:46:12 +0800,
> jojo <rjiejie at gmail.com (mailto:rjiejie at gmail.com)> a écrit :
> > This board is supported by yocto project ?
>
> yes
>
> > Anyone have any idea for this issue ?
> don't change anything on the environment the image generated by Yocto
> is ready to boot and not in sync with
> i.MX53_START_Linux_BSP_UserGuide.pdf which is LTIB based.
>
> Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131025/954deba1/attachment.html>
More information about the meta-freescale
mailing list