[meta-freescale] [meta-fsl-arm-extra] Strange audio behaviour on SabreLite
Gary Thomas
gary at mlbassoc.com
Tue Jun 10 11:09:36 PDT 2014
On 2014-06-10 12:02, Daiane Angolini wrote:
>>>> I'm using the 3.0.35 kernel on my SabreLite. I found that
>>>> once I plug in an HDMI monitor, the SGTL-5000 audio vanishes.
>>>> It stays missing, even when the board is reset (switch or
>>>> by reboot), until a power cycle.
>>>
>>>
>>> Do you know how your HDMI audio is configured?
>>
>>
>> Default image, built using Yocto (no tailoring).
>
> I don't remember what is the default for sabrelite board.
>
>>
>> The odd thing is that the SGTL-5000 works perfectly if I never
>> plug in the HDMI.
>
> It looks like, for me, your audio is configured to use the HDMI audio
> (spdif?) when it's present, by default
>
> aplay -l to see your cards
>
> asound.conf or asound.state to see your configuration
>
> for example:
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-arm/tree/recipes-bsp/alsa-state/alsa-state/mx6?h=master
All this is working as expected, but it's not what I'm asking about.
The problem is that if I plug in the HDMI, I can *NEVER* use the
internal (SGTL5000) audio again, even when I unplug the HDMI.
Neither rebooting, nor resetting the board using the switch
restores the internal audio. However, if I cycle the power
and boot with the HDMI not connected, it works again.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the meta-freescale
mailing list