[meta-freescale] [PATCH] remove ppc machine
Zhenhua Luo
zhenhua.luo at nxp.com
Wed Sep 6 23:35:49 PDT 2017
Hi Bob,
Please see my inline comments.
> -----Original Message-----
> From: Bob Cochran [mailto:yocto at mindchasers.com]
> Sent: Wednesday, September 06, 2017 9:30 PM
> To: Zhenhua Luo <zhenhua.luo at nxp.com>; meta-freescale at yoctoproject.org
> Cc: C.r. Guo <chunrong.guo at nxp.com>; otavio.salvador at ossystems.com.br
> Subject: Re: [meta-freescale] [PATCH] remove ppc machine
>
> On 09/06/2017 08:35 AM, Zhenhua Luo wrote:
> > Hi Bob,
> >
> > SDK 2.0 1703 GA release is the last QorIQ SDK(Yocto based) which supports
> both PPC and ARM targets, Layerscape SDK(Ubuntu userland based) has replaced
> QSDK, only ARM machines will be supported. The first formal release is LSDK-
> 1706 which has been announced and available in both http://www.nxp.com and
> https://lsdk.github.io/.
> >
> > In future, the Yocto recipes for ARM targets will continue to be updated in
> meta-freescale & meta-freescale-distro layers to align with new LSDK releases,
> the recipes of PPC will be removed. The bug fixes of PPC targets will be merged
> in legacy branches of corresponding Yocto layers.
>
>
> Thank you for the reply and information Zhenhua.
>
> So, 2.4/rocko won't have any powerpc support from NXP on
> meta-freescale.
[Zhenhua Luo] Yes
> Again, I think this is a mistake since meta-freescale
> isn't only for the exclusive use of NXP developers.
>
> I suppose the Yocto project should also purge mpc8315e-rdb.conf from meta-
> yocto-bsp master to completely kill off PPC from Yocto going forward.
[Zhenhua Luo] mpc8315erdb is selected as a sample BSP of PPC by Yocto community, the recipes of this board are totally from poky instead of meta-freescale, actually QSDK doesn't support this PPC machine for years. The source of boards support in meta-freescale layer is from QSDK/LSDK, since LSDK doesn't support PPC, we removed PPC targets from meta-freescale layer.
Best Regards,
Zhenhua
> Should I submit the patch?
>
> RIP NXP PPC
>
> Bob
>
>
> >
> >
> > Best Regards,
> >
> > Zhenhua
> >
> >> -----Original Message-----
> >> From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-
> >> bounces at yoctoproject.org] On Behalf Of Bob Cochran
> >> Sent: Wednesday, September 06, 2017 8:05 PM
> >> To: Chunrong Guo <B40290 at freescale.com>; meta-
> >> freescale at yoctoproject.org
> >> Cc: C.r. Guo <chunrong.guo at nxp.com>
> >> Subject: Re: [meta-freescale] [PATCH] remove ppc machine
> >>
> >> On 08/09/2017 01:14 AM, Chunrong Guo wrote:
> >>> From: Chunrong Guo <chunrong.guo at nxp.com>
> >>>
> >>> * nxp release will not support ppc machine.
> >> Can you please explain this? This seems to be in contrast to the
> >> stated direction on NXP's web site:
> >>
> >> "QorIQ SDK is a fully featured and mature Yocto-based software kit
> >> for QorIQ PowerPC based P-series and T-series family of processors.
> >> It also supports Layerscape family, but we recommend users to
> >> leverage the new Layerscape SDK to get access to latest features on
> Layerscape platforms."
> >>
> >> It seems that you should have removed the QorIQ / Layerscape ARM
> >> machine files (e.g., ls1021atwr.conf ) and left the PPC files.
> >>
> >> Regardless, this seems like a very big mistake since there are other
> >> users of PPC machine files; it's not for the exclusive use of NXP developers.
> >>
> >> Do you have plans to pull the Layerscape machine files? NXP is
> >> telling their Layerscape customers to move away from Yocto and onto the
> Layerscape SDK.
> >>
> >> http://www.nxp.com/products/developer-resources/run-time-software/lin
> >> ux- sdk/linux-sdk-for-qoriq-processors:SDKLINUX
> >>
> >>
> >>
> >>
> >>
> >>> Signed-off-by: Chunrong Guo <B40290 at freescale.com>
> >>> ---
> >>> conf/machine/include/e500mc.inc | 6 ------
> >>> conf/machine/include/e500v2.inc | 4 ----
> >>> conf/machine/include/e5500-64b.inc | 11 -----------
> >>> conf/machine/include/e5500.inc | 6 ------
> >>> conf/machine/include/e6500-64b.inc | 11 -----------
> >>> conf/machine/include/e6500.inc | 12 ------------
> >>> conf/machine/include/qoriq-ppc.inc | 10 ----------
> >>> conf/machine/p2041rdb.conf | 26 --------------------------
> >>> conf/machine/p3041ds.conf | 26 --------------------------
> >>> conf/machine/p4080ds.conf | 25 -------------------------
> >>> conf/machine/p5020ds-64b.conf | 26 --------------------------
> >>> conf/machine/p5020ds.conf | 26 --------------------------
> >>> conf/machine/p5040ds-64b.conf | 26 --------------------------
> >>> conf/machine/p5040ds.conf | 26 --------------------------
> >>> conf/machine/t1023rdb-64b.conf | 24 ------------------------
> >>> conf/machine/t1023rdb.conf | 24 ------------------------
> >>> conf/machine/t1024rdb-64b.conf | 27 ---------------------------
> >>> conf/machine/t1024rdb.conf | 27 ---------------------------
> >>> conf/machine/t1040d4rdb-64b.conf | 28 ----------------------------
> >>> conf/machine/t1040d4rdb.conf | 28 ----------------------------
> >>> conf/machine/t1042d4rdb-64b.conf | 28 ----------------------------
> >>> conf/machine/t1042d4rdb.conf | 28 ----------------------------
> >>> conf/machine/t2080qds-64b.conf | 27 ---------------------------
> >>> conf/machine/t2080qds.conf | 27 ---------------------------
> >>> conf/machine/t2080rdb-64b.conf | 27 ---------------------------
> >>> conf/machine/t2080rdb.conf | 27 ---------------------------
> >>> conf/machine/t4160qds-64b.conf | 21 ---------------------
> >>> conf/machine/t4160qds.conf | 21 ---------------------
> >>> conf/machine/t4240qds-64b.conf | 23 -----------------------
> >>> conf/machine/t4240qds.conf | 23 -----------------------
> >>> conf/machine/t4240rdb-64b.conf | 22 ----------------------
> >>> conf/machine/t4240rdb.conf | 22 ----------------------
> >>> conf/machine/twr-vf65gs10.conf | 20 --------------------
> >>> 33 files changed, 715 deletions(-)
> >>> delete mode 100644 conf/machine/include/e500mc.inc
> >>> delete mode 100644 conf/machine/include/e500v2.inc
> >>> delete mode 100644 conf/machine/include/e5500-64b.inc
> >>> delete mode 100644 conf/machine/include/e5500.inc
> >>> delete mode 100644 conf/machine/include/e6500-64b.inc
> >>> delete mode 100644 conf/machine/include/e6500.inc
> >>> delete mode 100644 conf/machine/include/qoriq-ppc.inc
> >>> delete mode 100644 conf/machine/p2041rdb.conf
> >>> delete mode 100644 conf/machine/p3041ds.conf
> >>> delete mode 100644 conf/machine/p4080ds.conf
> >>> delete mode 100644 conf/machine/p5020ds-64b.conf
> >>> delete mode 100644 conf/machine/p5020ds.conf
> >>> delete mode 100644 conf/machine/p5040ds-64b.conf
> >>> delete mode 100644 conf/machine/p5040ds.conf
> >>> delete mode 100644 conf/machine/t1023rdb-64b.conf
> >>> delete mode 100644 conf/machine/t1023rdb.conf
> >>> delete mode 100644 conf/machine/t1024rdb-64b.conf
> >>> delete mode 100644 conf/machine/t1024rdb.conf
> >>> delete mode 100644 conf/machine/t1040d4rdb-64b.conf
> >>> delete mode 100644 conf/machine/t1040d4rdb.conf
> >>> delete mode 100644 conf/machine/t1042d4rdb-64b.conf
> >>> delete mode 100644 conf/machine/t1042d4rdb.conf
> >>> delete mode 100644 conf/machine/t2080qds-64b.conf
> >>> delete mode 100644 conf/machine/t2080qds.conf
> >>> delete mode 100644 conf/machine/t2080rdb-64b.conf
> >>> delete mode 100644 conf/machine/t2080rdb.conf
> >>> delete mode 100644 conf/machine/t4160qds-64b.conf
> >>> delete mode 100644 conf/machine/t4160qds.conf
> >>> delete mode 100644 conf/machine/t4240qds-64b.conf
> >>> delete mode 100644 conf/machine/t4240qds.conf
> >>> delete mode 100644 conf/machine/t4240rdb-64b.conf
> >>> delete mode 100644 conf/machine/t4240rdb.conf
> >>> delete mode 100644 conf/machine/twr-vf65gs10.conf
> >>>
> >>> diff --git a/conf/machine/include/e500mc.inc
> >>> b/conf/machine/include/e500mc.inc deleted file mode 100644 index
> >>> ee1c296..0000000
> >>> --- a/conf/machine/include/e500mc.inc
> >>> +++ /dev/null
> >>> @@ -1,6 +0,0 @@
> >>> -TARGET_FPU = "hard"
> >>> -
> >>> -require conf/machine/include/tune-ppce500mc.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e500mc:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> diff --git a/conf/machine/include/e500v2.inc
> >>> b/conf/machine/include/e500v2.inc deleted file mode 100644 index
> >>> 420f034..0000000
> >>> --- a/conf/machine/include/e500v2.inc
> >>> +++ /dev/null
> >>> @@ -1,4 +0,0 @@
> >>> -require conf/machine/include/tune-ppce500v2.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e500v2:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> diff --git a/conf/machine/include/e5500-64b.inc
> >>> b/conf/machine/include/e5500-64b.inc
> >>> deleted file mode 100644
> >>> index c515508..0000000
> >>> --- a/conf/machine/include/e5500-64b.inc
> >>> +++ /dev/null
> >>> @@ -1,11 +0,0 @@
> >>> -TARGET_FPU = "hard"
> >>> -DEFAULTTUNE ?= "ppc64e5500"
> >>> -
> >>> -require conf/machine/include/tune-ppce5500.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e5500-64b:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> -
> >>> -require conf/multilib.conf
> >>> -MULTILIBS ?= "multilib:lib32"
> >>> -DEFAULTTUNE_virtclass-multilib-lib32 ?= "ppce5500"
> >>> diff --git a/conf/machine/include/e5500.inc
> >>> b/conf/machine/include/e5500.inc deleted file mode 100644 index
> >>> f905088..0000000
> >>> --- a/conf/machine/include/e5500.inc
> >>> +++ /dev/null
> >>> @@ -1,6 +0,0 @@
> >>> -TARGET_FPU = "hard"
> >>> -
> >>> -require conf/machine/include/tune-ppce5500.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e5500:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> diff --git a/conf/machine/include/e6500-64b.inc
> >>> b/conf/machine/include/e6500-64b.inc
> >>> deleted file mode 100644
> >>> index 33346d7..0000000
> >>> --- a/conf/machine/include/e6500-64b.inc
> >>> +++ /dev/null
> >>> @@ -1,11 +0,0 @@
> >>> -TARGET_FPU = "hard"
> >>> -DEFAULTTUNE ?= "ppc64e6500"
> >>> -
> >>> -require conf/machine/include/tune-ppce6500.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e6500-64b:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> -
> >>> -require conf/multilib.conf
> >>> -MULTILIBS ?= "multilib:lib32"
> >>> -DEFAULTTUNE_virtclass-multilib-lib32 ?= "ppce6500"
> >>> diff --git a/conf/machine/include/e6500.inc
> >>> b/conf/machine/include/e6500.inc deleted file mode 100644 index
> >>> b838c8d..0000000
> >>> --- a/conf/machine/include/e6500.inc
> >>> +++ /dev/null
> >>> @@ -1,12 +0,0 @@
> >>> -TARGET_FPU = "hard"
> >>> -
> >>> -require conf/machine/include/tune-ppce6500.inc
> >>> -
> >>> -MACHINEOVERRIDES =. "e6500:"
> >>> -require conf/machine/include/qoriq-ppc.inc
> >>> -
> >>> -BUILD_64BIT_KERNEL = "1"
> >>> -
> >>> -require conf/multilib.conf
> >>> -MULTILIBS ?= "multilib:lib64"
> >>> -DEFAULTTUNE_virtclass-multilib-lib64 ?= "ppc64e6500"
> >>> diff --git a/conf/machine/include/qoriq-ppc.inc
> >>> b/conf/machine/include/qoriq-ppc.inc
> >>> deleted file mode 100644
> >>> index b40e148..0000000
> >>> --- a/conf/machine/include/qoriq-ppc.inc
> >>> +++ /dev/null
> >>> @@ -1,10 +0,0 @@
> >>> -# Provides the common settings for QorIQ PPC
> >>> -
> >>> -KERNEL_IMAGETYPE ?= "uImage"
> >>> -
> >>> -SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyS1 115200;ttyEHV0"
> >>> -SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
> >>> -
> >>> -MACHINEOVERRIDES =. "qoriq-ppc:"
> >>> -
> >>> -require conf/machine/include/qoriq-base.inc
> >>> diff --git a/conf/machine/p2041rdb.conf b/conf/machine/p2041rdb.conf
> >>> deleted file mode 100644 index a579021..0000000
> >>> --- a/conf/machine/p2041rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P2041RDB
> >>> -#@SOC: p2041
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P2041 Reference
> >>> -# Design Board, rev2 silicon with ppce500mc core
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p2041:"
> >>> -
> >>> -require conf/machine/include/e500mc.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P2041RDB_config"
> >>> -UBOOT_CONFIG[nand] = "P2041RDB_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P2041RDB_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P2041RDB_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P2041RDB_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p2041rdb.dtb p2041rdb-usdpaa.dtb \
> >>> - p2041rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p3041ds.conf b/conf/machine/p3041ds.conf
> >>> deleted file mode 100644 index 91cdb9c..0000000
> >>> --- a/conf/machine/p3041ds.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P3041DS
> >>> -#@SOC: p3041
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P3041
> Development
> >>> -# System with ppce500mc core
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p3041:"
> >>> -
> >>> -require conf/machine/include/e500mc.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P3041DS_config"
> >>> -UBOOT_CONFIG[nand] = "P3041DS_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P3041DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P3041DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P3041DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p3041ds.dtb p3041ds-usdpaa.dtb \
> >>> - p3041ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p4080ds.conf b/conf/machine/p4080ds.conf
> >>> deleted file mode 100644 index 90cc74e..0000000
> >>> --- a/conf/machine/p4080ds.conf
> >>> +++ /dev/null
> >>> @@ -1,25 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P4080DS
> >>> -#@SOC: p4080
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P4080
> Development
> >>> -# System with ppce500mc core
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p4080:"
> >>> -
> >>> -require conf/machine/include/e500mc.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P4080DS_config"
> >>> -UBOOT_CONFIG[secure-boot] = "P4080DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P4080DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P4080DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p4080ds.dtb p4080ds-usdpaa.dtb \
> >>> - p4080ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p5020ds-64b.conf
> >>> b/conf/machine/p5020ds-64b.conf deleted file mode 100644 index
> >>> 4038519..0000000
> >>> --- a/conf/machine/p5020ds-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P5020DS-64B
> >>> -#@SOC: p5020
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P5020
> Development
> >>> -# System with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p5020:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P5020DS_config"
> >>> -UBOOT_CONFIG[nand] = "P5020DS_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P5020DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p5020ds.dtb p5020ds-usdpaa.dtb \
> >>> - p5020ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p5020ds.conf b/conf/machine/p5020ds.conf
> >>> deleted file mode 100644 index ff3bcd4..0000000
> >>> --- a/conf/machine/p5020ds.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P5020DS
> >>> -#@SOC: p5020
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P5020
> Development
> >>> -# System with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p5020:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P5020DS_config"
> >>> -UBOOT_CONFIG[nand] = "P5020DS_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P5020DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P5020DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P5020DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p5020ds.dtb p5020ds-usdpaa.dtb \
> >>> - p5020ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p5040ds-64b.conf
> >>> b/conf/machine/p5040ds-64b.conf deleted file mode 100644 index
> >>> de2b918..0000000
> >>> --- a/conf/machine/p5040ds-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P5040DS-64B
> >>> -#@SOC: p5040
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P5040
> Development
> >>> -# System with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p5040:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P5040DS_config"
> >>> -UBOOT_CONFIG[nand] = "P5040DS_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P5040DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p5040ds.dtb p5040ds-usdpaa.dtb \
> >>> - p5040ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/p5040ds.conf b/conf/machine/p5040ds.conf
> >>> deleted file mode 100644 index d4841bb..0000000
> >>> --- a/conf/machine/p5040ds.conf
> >>> +++ /dev/null
> >>> @@ -1,26 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP P5040DS
> >>> -#@SOC: p5040
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ P5040
> Development
> >>> -# System with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "p5040:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand secure-boot sdcard spi nor"
> >>> -UBOOT_CONFIG[nor] = "P5040DS_config"
> >>> -UBOOT_CONFIG[nand] = "P5040DS_NAND_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[secure-boot] = "P5040DS_SECURE_BOOT_config"
> >>> -UBOOT_CONFIG[sdcard] = "P5040DS_SDCARD_config,,u-boot.pbl"
> >>> -UBOOT_CONFIG[spi] = "P5040DS_SPIFLASH_config,,u-boot.pbl"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "p5040ds.dtb p5040ds-usdpaa.dtb \
> >>> - p5040ds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1023rdb-64b.conf
> >>> b/conf/machine/t1023rdb-64b.conf deleted file mode 100644 index
> >>> deb3fa7..0000000
> >>> --- a/conf/machine/t1023rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,24 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1023RDB
> >>> -#@SOC: t1023
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1023 Reference
> >>> -# Design Board with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1023:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1023RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1023RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1023RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1023rdb.dtb t1023rdb-usdpaa.dtb t1023rdb-
> >> usdpaa-shared-interfaces.dtb"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1023rdb.conf b/conf/machine/t1023rdb.conf
> >>> deleted file mode 100644 index c620e1a..0000000
> >>> --- a/conf/machine/t1023rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,24 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1023RDB
> >>> -#@SOC: t1023
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1023 Reference
> >>> -# Design Board with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1023:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1023RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1023RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1023RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1023RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1023RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1023rdb.dtb t1023rdb-usdpaa.dtb t1023rdb-
> >> usdpaa-shared-interfaces.dtb"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1024rdb-64b.conf
> >>> b/conf/machine/t1024rdb-64b.conf deleted file mode 100644 index
> >>> 85cb2f8..0000000
> >>> --- a/conf/machine/t1024rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1024RDB
> >>> -#@SOC: t1024
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1024 Reference
> >>> -# Design Board with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1024:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1024RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1024RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1024RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1024rdb.dtb t1024rdb-usdpaa.dtb \
> >>> - t1024rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE ?= "iram_Type_A_T1024_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1024rdb.conf b/conf/machine/t1024rdb.conf
> >>> deleted file mode 100644 index b4f6e05..0000000
> >>> --- a/conf/machine/t1024rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1024RDB
> >>> -#@SOC: t1024
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1024 Reference
> >>> -# Design Board with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1024:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1024RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1024RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1024RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1024RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1024RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1024rdb.dtb t1024rdb-usdpaa.dtb \
> >>> - t1024rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE ?= "iram_Type_A_T1024_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1040d4rdb-64b.conf
> >>> b/conf/machine/t1040d4rdb-64b.conf
> >>> deleted file mode 100644
> >>> index 19c013e..0000000
> >>> --- a/conf/machine/t1040d4rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,28 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1040D4RDB
> >>> -#@SOC: t1040
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1040D4
> Reference
> >>> -# Design Board with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1040:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1040D4RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config,,u-boot-with-
> spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1040D4RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1040d4rdb.dtb t1040d4rdb-usdpaa.dtb \
> >>> - t1040d4rdb-dsar.dtb \
> >>> - t1040d4rdb-usdpaa-lag.dtb t1040d4rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE = "iram_Type_A_T1040_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1040d4rdb.conf
> >>> b/conf/machine/t1040d4rdb.conf deleted file mode 100644 index
> >>> faa17d0..0000000
> >>> --- a/conf/machine/t1040d4rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,28 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1040D4RDB
> >>> -#@SOC: t1040
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1040D4
> Reference
> >>> -# Design Board with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1040:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1040D4RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1040D4RDB_NAND_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1040D4RDB_SDCARD_config,,u-boot-with-
> spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1040D4RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1040D4RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1040d4rdb.dtb t1040d4rdb-usdpaa.dtb \
> >>> - t1040d4rdb-dsar.dtb \
> >>> - t1040d4rdb-usdpaa-lag.dtb t1040d4rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE = "iram_Type_A_T1040_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1042d4rdb-64b.conf
> >>> b/conf/machine/t1042d4rdb-64b.conf
> >>> deleted file mode 100644
> >>> index 0ec1913..0000000
> >>> --- a/conf/machine/t1042d4rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,28 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1042D4RDB
> >>> -#@SOC: t1042
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1042D4
> Reference
> >>> -# Design Board with ppce5500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1042:"
> >>> -
> >>> -require conf/machine/include/e5500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1042D4RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config,,u-boot-with-
> spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1042D4RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1042d4rdb.dtb t1042d4rdb-usdpaa.dtb \
> >>> - t1042d4rdb-dsar.dtb \
> >>> - t1042d4rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE = "iram_Type_A_T1040_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t1042d4rdb.conf
> >>> b/conf/machine/t1042d4rdb.conf deleted file mode 100644 index
> >>> 38ea1dc..0000000
> >>> --- a/conf/machine/t1042d4rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,28 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T1042D4RDB
> >>> -#@SOC: t1042
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T1042D4
> Reference
> >>> -# Design Board with ppce5500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t1:t1042:"
> >>> -
> >>> -require conf/machine/include/e5500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nand sdcard spi secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T1042D4RDB_config"
> >>> -UBOOT_CONFIG[nand] = "T1042D4RDB_NAND_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[sdcard] = "T1042D4RDB_SDCARD_config,,u-boot-with-
> spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T1042D4RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[secure-boot] = "T1042D4RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t1042d4rdb.dtb t1042d4rdb-usdpaa.dtb \
> >>> - t1042d4rdb-dsar.dtb \
> >>> - t1042d4rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet32_fmanv3l_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -QE_UCODE = "iram_Type_A_T1040_r1.0.bin"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg qe-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t2080qds-64b.conf
> >>> b/conf/machine/t2080qds-64b.conf deleted file mode 100644 index
> >>> eb3072c..0000000
> >>> --- a/conf/machine/t2080qds-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T2080QDS-64B
> >>> -#@SOC: t2080
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T2080
> Development
> >>> -# System with ppce6500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t2:t2080:"
> >>> -
> >>> -require conf/machine/include/e6500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T2080QDS_config"
> >>> -UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[nand] = "T2080QDS_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[srio-pcie-boot] = "T2080QDS_SRIO_PCIE_BOOT_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T2080QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t2080qds.dtb t2080qds-usdpaa.dtb \
> >>> - t2080qds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t2080qds.conf b/conf/machine/t2080qds.conf
> >>> deleted file mode 100644 index cef15d7..0000000
> >>> --- a/conf/machine/t2080qds.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T2080QDS
> >>> -#@SOC: t2080
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T2080
> Development
> >>> -# System with ppce6500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t2:t2080:"
> >>> -
> >>> -require conf/machine/include/e6500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T2080QDS_config"
> >>> -UBOOT_CONFIG[sdcard] = "T2080QDS_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T2080QDS_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[nand] = "T2080QDS_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[srio-pcie-boot] = "T2080QDS_SRIO_PCIE_BOOT_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T2080QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t2080qds.dtb t2080qds-usdpaa.dtb \
> >>> - t2080qds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t2080rdb-64b.conf
> >>> b/conf/machine/t2080rdb-64b.conf deleted file mode 100644 index
> >>> ebd0cd9..0000000
> >>> --- a/conf/machine/t2080rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T2080RDB
> >>> -#@SOC: t2080
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T2080 Reference
> >>> -# Design Board with ppce6500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t2:t2080:"
> >>> -
> >>> -require conf/machine/include/e6500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T2080RDB_config"
> >>> -UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[nand] = "T2080RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[srio-pcie-boot] = "T2080RDB_SRIO_PCIE_BOOT_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T2080RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t2080rdb.dtb t2080rdb-usdpaa.dtb \
> >>> - t2080rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t2080rdb.conf b/conf/machine/t2080rdb.conf
> >>> deleted file mode 100644 index cd618a6..0000000
> >>> --- a/conf/machine/t2080rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,27 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T2080RDB
> >>> -#@SOC: t2080
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T2080 Reference
> >>> -# Design Board with ppce6500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t2:t2080:"
> >>> -
> >>> -require conf/machine/include/e6500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "sdcard spi nand srio-pcie-boot secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T2080RDB_config"
> >>> -UBOOT_CONFIG[sdcard] = "T2080RDB_SDCARD_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[spi] = "T2080RDB_SPIFLASH_config,,u-boot-with-spl-
> >> pbl.bin"
> >>> -UBOOT_CONFIG[nand] = "T2080RDB_NAND_config,,u-boot-with-spl-
> pbl.bin"
> >>> -UBOOT_CONFIG[srio-pcie-boot] = "T2080RDB_SRIO_PCIE_BOOT_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T2080RDB_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t2080rdb.dtb t2080rdb-usdpaa.dtb \
> >>> - t2080rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4160qds-64b.conf
> >>> b/conf/machine/t4160qds-64b.conf deleted file mode 100644 index
> >>> 6b07482..0000000
> >>> --- a/conf/machine/t4160qds-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,21 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4160QDS-64B
> >>> -#@SOC: t4160
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4160
> Development
> >>> -# System with ppce6500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4160:"
> >>> -
> >>> -require conf/machine/include/e6500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T4160QDS_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T4160QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240qds.dtb t4240qds-usdpaa.dtb"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4160qds.conf b/conf/machine/t4160qds.conf
> >>> deleted file mode 100644 index d5070ba..0000000
> >>> --- a/conf/machine/t4160qds.conf
> >>> +++ /dev/null
> >>> @@ -1,21 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4160QDS
> >>> -#@SOC: t4160
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4160
> Development
> >>> -# System with ppce6500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4160:"
> >>> -
> >>> -require conf/machine/include/e6500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T4160QDS_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T4160QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240qds.dtb t4240qds-usdpaa.dtb"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4240qds-64b.conf
> >>> b/conf/machine/t4240qds-64b.conf deleted file mode 100644 index
> >>> efb2b7c..0000000
> >>> --- a/conf/machine/t4240qds-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,23 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4240QDS-64B
> >>> -#@SOC: t4240
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4240
> Development
> >>> -# System with ppce6500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4240:"
> >>> -
> >>> -require conf/machine/include/e6500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T4240QDS_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T4240QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240qds.dtb t4240qds-usdpaa.dtb \
> >>> - t4240qds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4240qds.conf b/conf/machine/t4240qds.conf
> >>> deleted file mode 100644 index d68eba2..0000000
> >>> --- a/conf/machine/t4240qds.conf
> >>> +++ /dev/null
> >>> @@ -1,23 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4240QDS
> >>> -#@SOC: t4240
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4240
> Development
> >>> -# System with ppce6500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4240:"
> >>> -
> >>> -require conf/machine/include/e6500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "secure-boot nor"
> >>> -UBOOT_CONFIG[nor] = "T4240QDS_config"
> >>> -UBOOT_CONFIG[secure-boot] = "T4240QDS_SECURE_BOOT_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240qds.dtb t4240qds-usdpaa.dtb \
> >>> - t4240qds-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4240rdb-64b.conf
> >>> b/conf/machine/t4240rdb-64b.conf deleted file mode 100644 index
> >>> 5ab7f23..0000000
> >>> --- a/conf/machine/t4240rdb-64b.conf
> >>> +++ /dev/null
> >>> @@ -1,22 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4240RDB
> >>> -#@SOC: t4240
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4240 Reference
> >>> -# Design Board with ppce6500 core in 64b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4240:"
> >>> -
> >>> -require conf/machine/include/e6500-64b.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nor"
> >>> -UBOOT_CONFIG[nor] = "T4240RDB_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240rdb.dtb t4240rdb-usdpaa.dtb \
> >>> - t4240rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/t4240rdb.conf b/conf/machine/t4240rdb.conf
> >>> deleted file mode 100644 index 4d3549e..0000000
> >>> --- a/conf/machine/t4240rdb.conf
> >>> +++ /dev/null
> >>> @@ -1,22 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP T4240RDB
> >>> -#@SOC: t4240
> >>> -#@DESCRIPTION: Machine configuration for NXP QorIQ T4240 Reference
> >>> -# Design Board with ppce6500 core in 32b mode
> >>> -#@MAINTAINER: Chunrong Guo <B40290 at freescale.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "t4:t4240:"
> >>> -
> >>> -require conf/machine/include/e6500.inc
> >>> -
> >>> -UBOOT_CONFIG ??= "nor"
> >>> -UBOOT_CONFIG[nor] = "T4240RDB_config"
> >>> -
> >>> -KERNEL_DEVICETREE ?= "t4240rdb.dtb t4240rdb-usdpaa.dtb \
> >>> - t4240rdb-usdpaa-shared-interfaces.dtb \
> >>> -"
> >>> -KERNEL_DEFCONFIG ?=
> >> "${S}/arch/powerpc/configs/corenet64_fmanv3h_smp_defconfig"
> >>> -
> >>> -JFFS2_ERASEBLOCK = "0x10000"
> >>> -EXTRA_IMAGEDEPENDS += "fm-ucode rcw lib64-hypervisor hv-cfg"
> >>> -USE_VT ?= "0"
> >>> diff --git a/conf/machine/twr-vf65gs10.conf
> >>> b/conf/machine/twr-vf65gs10.conf deleted file mode 100644 index
> >>> 67fddaa..0000000
> >>> --- a/conf/machine/twr-vf65gs10.conf
> >>> +++ /dev/null
> >>> @@ -1,20 +0,0 @@
> >>> -#@TYPE: Machine
> >>> -#@NAME: NXP Vybrid TWR-VF65GS10
> >>> -#@SOC: VF610
> >>> -#@DESCRIPTION: Machine configuration for NXP Vybrid TWR-VF65GS10
> >>> -#@MAINTAINER: Stefan Agner <stefan.agner at toradex.com>
> >>> -
> >>> -MACHINEOVERRIDES =. "vf:vf60:"
> >>> -
> >>> -include conf/machine/include/imx-base.inc -include
> >>> conf/machine/include/tune-cortexa5.inc
> >>> -
> >>> -PREFERRED_PROVIDER_virtual/kernel ?= "linux-fslc"
> >>> -
> >>> -UBOOT_MACHINE = "vf610twr_config"
> >>> -
> >>> -KERNEL_DEVICETREE = "vf610-twr.dtb"
> >>> -
> >>> -SERIAL_CONSOLE = "115200 ttyLP1"
> >>> -
> >>> -MACHINE_FEATURES = "usbgadget usbhost vfat alsa touchscreen"
> >>
> >> --
> >> _______________________________________________
> >> meta-freescale mailing list
> >> meta-freescale at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-freescale
>
More information about the meta-freescale
mailing list