[meta-ti] Can't build ti-dmai

[Gary Thomas]

On 2012-04-04 10:06, Gary Thomas wrote:
> Trying to build ti-dmai gives this error:
> ERROR: Function failed: do_install (see
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
> ERROR: Logfile of failure stored in:
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360
> Log data follows:
> | ERROR: Function failed: do_install (see
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
> | make -C ./packages/ti/sdo/dmai install
> | make[1]: Entering directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>
> | make[1]: Nothing to be done for `install'.
> | make[1]: Leaving directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>
> | make -C ./packages/ti/sdo/dmai/apps install
> | make[1]: Entering directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>
> |
> | Executing make in subdirectory Makefile...
> | make: Entering an unknown directory
> | make: *** Makefile: Not a directory. Stop.
> | make: Leaving an unknown directory
> | make[1]: *** [Makefile] Error 2
> | make[1]: Leaving directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>
> | make: *** [install] Error 2
> NOTE: package ti-dmai-1_2_10_00_01+svnr642-r118o: task do_install: Failed
> ERROR: Task 3 (/local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 1134 tasks of which 783 didn't need to be rerun and 1 failed.
>
> Summary: 1 task failed:
> /local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install
>
> I'm using this configuration (up to date):
> OE Build Configuration:
> BB_VERSION = "1.15.1"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beagleboard"
> DISTRO = "angstrom"
> DISTRO_VERSION = "v2012.04-core"
> TUNE_FEATURES = "armv7a vfp neon cortexa8"
> TARGET_FPU = "vfp-neon"
> meta-angstrom = "master:6e986067a5b5be696c0115c6b4395f21cb6d771a"
> meta-oe
> toolchain-layer
> meta-efl
> meta-gpe
> meta-gnome
> meta-xfce
> meta-initramfs = "master:d248ea6ada38ba9070f45f4fd2ab107bc6ed0246"
> meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731"
> meta-java = "master:3e8579a967664c0e4b6f047c70f6893b72dc9573"
> meta-mozilla = "master:5737d9fa26a632a27b2aa760c0d01190f0a17d0e"
> meta-ti = "master:246cb75a970e9aab0a3974a55e72c6d90f1df151"
> meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d"
> meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee"
> meta-htc
> meta-nokia
> meta-openmoko
> meta-palm = "master:ba34166f4565b52209adea82cef196615cf82246"
> meta-handheld = "master:df6d514ae413f131e95d0f0c6c3b6792a006d451"
> meta-intel
> meta-sugarbay
> meta-crownbay
> meta-emenlow
> meta-fishriver
> meta-jasperforest
> meta-n450 = "master:f89405e115d73426c8a6450b6e795b5885d6bdf3"
> meta = "master:1634d736c55f767fe82a46bbb7f83c32006fece9"
>
> Any ideas/pointers?
>

This line in the Makefile is getting strange/different results:
   SUBDIRS = $(sort $(dir $(wildcard */)))

I've found the weirdness, but I don't understand what's going on.  I changed
the Makefile to print $(SUBDIRS) to try and figure it out.

When bitbake runs make in 
/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps
the result is
   Makefile.app/ Makefile/ Makefile~/ app_common.cfg/ app_common.tci/ audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ dmai.gel/ fc_common.cfg/ 
image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/ speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/ 
video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/ video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/

the real result should be
   audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/ 
speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/ video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/ 
video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/

which I get if I execute make in that directory maually!  The bitbake build
is failing because files are being treated as directories (listed in $(SUBDIRS))

Can someone explain this?  I also had the Makefile print the
value of $(MAKE) and it's always /usr/bin/make

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------