[meta-ti] [PATCH] bt-enable: Add bt-enable recipe

[Koen Kooi]

Why isn't this using the standard kim platformdata in the kernel? That also gives you a nice rfkill interface. That's how all the wl127x boards in mainline do it.

Op 5 okt. 2012, om 21:27 heeft Franklin S. Cooper Jr <fcooperjr27 at gmail.com> het volgende geschreven:

> * Port bt-enable recipe from arago.
> * Bt-enable is used to enable the BT module on the TI wl12xx
>  Wi-Fi + Bluetooth module.
> 
> Signed-off-by: Franklin S. Cooper Jr <fcooper at ti.com>
> ---
> Version 2 changes:
> Loosen up COMPATIBLE_MACHINE restriction. Using generic SOC family when
> possible.
> 
> ...kefile-Update-makefile-to-work-well-in-OE.patch |   78 ++++++++++++++++++++
> recipes-bsp/bt-enable/bt-enable_1.0.bb             |   41 ++++++++++
> 2 files changed, 119 insertions(+), 0 deletions(-)
> create mode 100644 recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
> create mode 100644 recipes-bsp/bt-enable/bt-enable_1.0.bb
> 
> diff --git a/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch b/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
> new file mode 100644
> index 0000000..7e6756c
> --- /dev/null
> +++ b/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
> @@ -0,0 +1,78 @@
> +From a400ac3d83023a66a356d056899d6b380cb30473 Mon Sep 17 00:00:00 2001
> +From: Chase Maupin <Chase.Maupin at ti.com>
> +Date: Wed, 7 Mar 2012 10:51:43 -0600
> +Subject: [PATCH] Makefile: Update makefile to work with OE
> +
> +* Updated the makefile to with OE
> +* Use the kernel install target for installing the module
> +
> +Upstream-Status: Pending
> +    * will be in next release
> +
> +Signed-off-by: Chase Maupin <Chase.Maupin at ti.com>
> +---
> + Makefile |   45 ++++++++++++++++++++++++++++++++++++++++-----
> + 1 files changed, 40 insertions(+), 5 deletions(-)
> +
> +diff --git a/Makefile b/Makefile
> +index ebbcd11..b17d33e 100755
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -7,15 +7,50 @@ else
> +   EXTRA_CFLAGS += -O2
> + endif
> +
> ++-include ../../../Rules.make
> ++
> ++# If KERNEL_DIR is not set then use the default in Rules.make
> ++KERNEL_DIR ?= ${LINUXKERNEL_INSTALL_DIR}
> ++DEST_DIR ?= ${DESTDIR}
> ++
> ++PLATFORM ?= "unknown"
> ++MACHINE_NAME ?= "unknown"
> ++
> ++# Use the PLATFORM value from the Rules.make if it was sourced
> ++ifeq ($(PLATFORM), am335x-evm)
> ++    MACHINE_NAME := "am335x"
> ++endif
> ++ifeq ($(PLATFORM), am180x-evm)
> ++    MACHINE_NAME := "am1808"
> ++endif
> ++ifeq ($(PLATFORM), da850-omapl138-evm)
> ++    MACHINE_NAME := "am1808"
> ++endif
> ++ifeq ($(PLATFORM), am37x-evm)
> ++    MACHINE_NAME := "omap3evm"
> ++endif
> ++
> ++# If CROSS_COMPILE is not set by Rules.make then set a sane default
> ++CROSS_COMPILE ?= arm-arago-linux-gnueabi-
> ++export CROSS_COMPILE
> ++
> ++# set the INSTALL_MOD_DIR so that the executables won't be placed in extra
> ++INSTALL_MOD_DIR = kernel/drivers/bt_enable
> ++export INSTALL_MOD_DIR
> ++
> + obj-m := gpio_en.o
> +
> ++MAKE_ENV = ARCH=arm
> ++
> + PWD := $(shell pwd)
> + all:
> +-	pwd
> +-	@echo EXTRA_CFLAGS = $(EXTRA_CFLAGS)
> +-	$(MAKE) CROSS_COMPILE=$(CROSS_COMPILE) ARCH=$(ARCH) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) M=$(PWD) modules
> ++	@cp -f gpio_en_${MACHINE_NAME}.c gpio_en.c
> ++	$(MAKE) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) $(MAKE_ENV) \
> ++    M=$(PWD) modules
> ++
> + install:
> +-	install -d ${DEST_DIR}${BASE_LIB_DIR}/modules/${KRNL_VER}/kernel/drivers/bt_enable
> +-	install -m 0755 ./gpio_en.ko ${DEST_DIR}${BASE_LIB_DIR}/modules/${KRNL_VER}/kernel/drivers/bt_enable
> ++	$(MAKE) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) $(MAKE_ENV) \
> ++    M=$(PWD) INSTALL_MOD_PATH="${DEST_DIR}" modules_install
> ++
> + clean:
> +	rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions *.symvers
> +--
> +1.7.0.4
> diff --git a/recipes-bsp/bt-enable/bt-enable_1.0.bb b/recipes-bsp/bt-enable/bt-enable_1.0.bb
> new file mode 100644
> index 0000000..b6f1ee7
> --- /dev/null
> +++ b/recipes-bsp/bt-enable/bt-enable_1.0.bb
> @@ -0,0 +1,41 @@
> +DESCRIPTION = "BT GPIO Enable"
> +LICENSE = "BSD"
> +COMPATIBLE_MACHINE = "omap3|omapl138|da850-omapl138-evm|ti33x"
> +LIC_FILES_CHKSUM = "file://gpio_en_am1808.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
> +                    file://gpio_en_am335x.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
> +                    file://gpio_en_omap3evm.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
> +"
> +
> +DEPENDS = "virtual/kernel"
> +
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
> +
> +PACKAGE_STRIP = "no"
> +
> +inherit module
> +
> +MACHINE_KERNEL_PR_append = "a"
> +PR = "r0+gitr${SRCREV}"
> +
> +SRCREV = "97c4600ff7d39f1cc6079939248cd9ed15100db4"
> +
> +SRC_URI = "git://github.com/TI-ECS/bt_enable.git;protocol=git \
> +           file://0001-Makefile-Update-makefile-to-work-well-in-OE.patch \
> +          "
> +
> +PLATFORM = "unknown"
> +PLATFORM_ti33x = "am335x-evm"
> +PLATFORM_omap3 = "am37x-evm"
> +PLATFORM_omapl138 = "am180x-evm"
> +PLATFORM_da850-omapl138-evm = "am180x-evm"
> +
> +S = "${WORKDIR}/git"
> +
> +EXTRA_OEMAKE = " \
> +	KERNEL_DIR=${STAGING_KERNEL_DIR} \
> +    PLATFORM=${PLATFORM} \
> +"
> +
> +do_install () {
> +	oe_runmake 'DEST_DIR=${D}' install
> +}
> -- 
> 1.7.0.4
> 
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti