[meta-ti] [PATCH] recipes: Fix ti-eula-unpack issue. Tweak sgx modules and libgles recipes.
Maupin, Chase
chase.maupin at ti.com
Wed Oct 10 08:04:32 PDT 2012
Based on our discussions last week:
Acked-by: Chase Maupin <chase.maupin at ti.com>
Sincerely,
Chase Maupin
Software Applications
ARM MPU
e-mail: chase.maupin at ti.com
phone: (214) 567-2950
For support:
Forums - http://community.ti.com/forums/
Wiki - http://wiki.davincidsp.com/
> -----Original Message-----
> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-
> bounces at yoctoproject.org] On Behalf Of Cooper Jr., Franklin
> Sent: Tuesday, October 09, 2012 10:35 PM
> To: meta-ti at yoctoproject.org
> Subject: Re: [meta-ti] [PATCH] recipes: Fix ti-eula-unpack issue.
> Tweak sgx modules and libgles recipes.
>
> ping. Any comments?
>
> -----Original Message-----
> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-
> bounces at yoctoproject.org] On Behalf Of Cooper Jr., Franklin
> Sent: Monday, September 17, 2012 6:15 PM
> To: meta-ti at yoctoproject.org
> Subject: Re: [meta-ti] [PATCH] recipes: Fix ti-eula-unpack issue.
> Tweak sgx modules and libgles recipes.
>
> ping
>
> -----Original Message-----
> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-
> bounces at yoctoproject.org] On Behalf Of Franklin S. Cooper Jr
> Sent: Saturday, September 01, 2012 12:45 PM
> To: meta-ti at yoctoproject.org
> Cc: Franklin S. Cooper Jr
> Subject: [meta-ti] [PATCH] recipes: Fix ti-eula-unpack issue.
> Tweak sgx modules and libgles recipes.
>
> * Commit d8fc4a686262c50fd0053afa7240020909ec430b addressed an
> issue where
> too many newlines characters were being sent since print by
> default already
> sends a newline character. This commit however resulted in bin
> files being
> installed in the WORKDIR and broke other recipes which commit
> a94f765b9867abefd5f0bd262b5dddb8782b3187 addressed. This lead
> to a very
> cluttered WORKDIR.
> * This patch updates ti-eula-unpack.inc to switch from using a
> print to a write.
> Since write doesn't automatically send newlines it is a bit
> more obvious when
> newlines are sent.
> * Part of the reason that bin files were being installed in the
> WORKDIR was
> due to TI_BIN_UNPK_WDEXT being blank for some recipes. For
> instance in the
> libgles-omap3 recipes, when the workdir command is set in
> TI_BIN_UNPK_CMDS the
> directory that the Graphics SDK will be installed into is
> workdir+TI_BIN_UNPK_WDEXT. A blank TI_BIN_UNPK_WDEXT means the
> SDK will be
> installed in WORKDIR. By setting TI_BIN_UNPK_WDEXT to a proper
> value the
> recipes can be sure it is installed in the proper directory.
> * Determine which file to download based on the defined BINFILE
> and not a
> hardcoded value. This idea was taken from arago.
>
> Signed-off-by: Franklin S. Cooper Jr <fcooper27jr at gmail.com>
> ---
> .../omap3-sgx-modules_1.6.16.3977.bb | 8 ++++--
> --
> recipes-graphics/libgles/libgles-omap3.inc | 4 ++--
> .../libgles/libgles-omap3_4.03.00.02.bb | 6 +++---
> .../libgles/libgles-omap3_4.05.00.03.bb | 6 +++---
> recipes-ti/includes/ti-eula-unpack.inc | 4 ++--
> 5 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/recipes-bsp/powervr-drivers/omap3-sgx-
> modules_1.6.16.3977.bb b/recipes-bsp/powervr-drivers/omap3-sgx-
> modules_1.6.16.3977.bb
> index 0affee1..4f9be7b 100644
> --- a/recipes-bsp/powervr-drivers/omap3-sgx-
> modules_1.6.16.3977.bb
> +++ b/recipes-bsp/powervr-drivers/omap3-sgx-
> modules_1.6.16.3977.bb
> @@ -11,17 +11,17 @@ BINFILE :=
> "Graphics_SDK_setuplinux_${SGXPV}.bin"
>
> inherit module
>
> -MACHINE_KERNEL_PR_append = "a"
> +MACHINE_KERNEL_PR_append = "b"
> PR = "${MACHINE_KERNEL_PR}"
>
> -SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> }/exports/Graphics_SDK_setuplinux_${SGXPV}.bin \
> +SRC_URI =
> +"http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfx
> +sdk/${SGXPV}/exports/${BINFILE} \
> file://Compile-fixes-for-38-kernel.patch \
> file://kernel-30.patch \
> "
> SRC_URI[md5sum] = "ff8c1f2b8e4cb42f4ced6a613b081ada"
> SRC_URI[sha256sum] =
> "cdb0bd3964e107733d632aa8224e0537b05c1ffac34befc036423458c8d75255
> "
> -
> -S = "${WORKDIR}/Graphics_SDK_${SGXPV}/GFX_Linux_KM"
> +TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
> +S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
>
> PVRBUILD = "release"
> export KERNELDIR = "${STAGING_KERNEL_DIR}"
> diff --git a/recipes-graphics/libgles/libgles-omap3.inc
> b/recipes-graphics/libgles/libgles-omap3.inc
> index 18ee7ff..4525285 100644
> --- a/recipes-graphics/libgles/libgles-omap3.inc
> +++ b/recipes-graphics/libgles/libgles-omap3.inc
> @@ -3,7 +3,7 @@ LICENSE = "proprietary-binary"
> # 'TSPA.txt' might not be the best file to md5sum
> LIC_FILES_CHKSUM =
> "file://TSPA.txt;md5=c0d5d9c1e38b41677144c4e24d6ddee1"
>
> -PR = "r31"
> +PR = "r32"
>
> COMPATIBLE_MACHINE = "(omap3|ti814x|ti816x|ti33x)"
>
> @@ -11,7 +11,7 @@ DEPENDS = "virtual/libx11 libxau libxdmcp
> libdrm"
>
> PROVIDES += "virtual/egl"
>
> -SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> }/exports/OMAP35x_Graphics_SDK_setuplinux_${SGXPV}.bin \
> +SRC_URI =
> +"http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfx
> +sdk/${SGXPV}/exports/${BINFILE} \
> file://cputype \
> file://rc.pvr \
> file://sample.desktop \
> diff --git a/recipes-graphics/libgles/libgles-omap3_4.03.00.02.bb
> b/recipes-graphics/libgles/libgles-omap3_4.03.00.02.bb
> index 97a22fe..e98fe02 100644
> --- a/recipes-graphics/libgles/libgles-omap3_4.03.00.02.bb
> +++ b/recipes-graphics/libgles/libgles-omap3_4.03.00.02.bb
> @@ -15,8 +15,9 @@ require libgles-omap3.inc SGXPV = "4_03_00_02"
> IMGPV = "1.6.16.3977"
> BINFILE := "Graphics_SDK_setuplinux_${SGXPV}.bin"
> +TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
>
> -SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> }/exports/Graphics_SDK_setuplinux_${SGXPV}.bin \
> +SRC_URI =
> +"http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfx
> +sdk/${SGXPV}/exports/${BINFILE} \
> file://cputype \
> file://rc.pvr \
> file://sample.desktop \ @@ -26,5 +27,4 @@
> SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gf
> SRC_URI[md5sum] = "ff8c1f2b8e4cb42f4ced6a613b081ada"
> SRC_URI[sha256sum] =
> "cdb0bd3964e107733d632aa8224e0537b05c1ffac34befc036423458c8d75255
> "
>
> -S = "${WORKDIR}"
> -
> +S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
> diff --git a/recipes-graphics/libgles/libgles-omap3_4.05.00.03.bb
> b/recipes-graphics/libgles/libgles-omap3_4.05.00.03.bb
> index d55dd05..7795e2e 100644
> --- a/recipes-graphics/libgles/libgles-omap3_4.05.00.03.bb
> +++ b/recipes-graphics/libgles/libgles-omap3_4.05.00.03.bb
> @@ -12,8 +12,9 @@ require libgles-omap3.inc SGXPV = "4_05_00_03"
> IMGPV = "1.6.16.4117"
> BINFILE := "Graphics_SDK_setuplinux_${SGXPV}.bin"
> +TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
>
> -SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> }/exports/Graphics_SDK_setuplinux_${SGXPV}.bin \
> +SRC_URI =
> +"http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfx
> +sdk/${SGXPV}/exports/${BINFILE} \
> file://cputype \
> file://rc.pvr \
> file://sample.desktop \ @@ -23,5 +24,4 @@
> SRC_URI = "http://software-
> dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gf
> SRC_URI[md5sum] = "0e651eaa92bb91760f0b40a17697a7dc"
> SRC_URI[sha256sum] =
> "bfe764a8959556195545d6fff76f63a489642f345c105bbbc309a3f243c2dd0e
> "
>
> -S = "${WORKDIR}"
> -
> +S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
> diff --git a/recipes-ti/includes/ti-eula-unpack.inc b/recipes-
> ti/includes/ti-eula-unpack.inc
> index 60f5558..aee88f1 100644
> --- a/recipes-ti/includes/ti-eula-unpack.inc
> +++ b/recipes-ti/includes/ti-eula-unpack.inc
> @@ -14,7 +14,7 @@ python do_unpack () {
> bb.build.exec_func('ti_bin_do_unpack', d) }
>
> -TI_BIN_UNPK_WDEXT += ""
> +TI_BIN_UNPK_WDEXT ?= ""
> python ti_bin_do_unpack() {
>
> import os
> @@ -60,7 +60,7 @@ python ti_bin_do_unpack() {
> wdext = bb.data.getVar('TI_BIN_UNPK_WDEXT',
> localdata)
> wdext = bb.data.expand(wdext, localdata)
> cmd = workdir+wdext
> - print >>f, cmd
> + f.write(cmd+'\n');
> f.close()
>
> # Expand the tarball that was created if required
> --
> 1.7.0.4
>
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
More information about the meta-ti
mailing list