[meta-ti] pandaboard not booting

[Gary Thomas]

On 2012-09-27 10:24, Denys Dmytriyenko wrote:
> On Thu, Sep 27, 2012 at 06:22:42PM +0200, Enrico wrote:
>> On Thu, Sep 27, 2012 at 6:10 PM, Khem Raj <raj.khem at gmail.com> wrote:
>>> On Thu, Sep 27, 2012 at 9:08 AM, Gary Thomas <gary at mlbassoc.com> wrote:
>>>> I've tried this kernel on a PandaBoard, built with both GCC-4.7.2 (latest
>>>> master)
>>>> and GCC-4.6.3 (~denzil).  Both fail during to come up.
>>>
>>> OK you can take further step back and use edison SDK which has gcc 4.5
>>> which then can _kind_ of eliminate the compiler if it fails with all 3
>>
>> Or take a step forward and try a newer kernel ;)
>
> Well, the current kernel used to work at least on Pandaboard ES...

I build the Panda kernel (based on the latest TI/Ubuntu tree ti-ubuntu-3.4-1485.7 branch)
all the time with the Yocto toolchain & it works just fine.

I also tried the off-the-shelf 3.1.0 which worked as well.

There must be something odd about the 3.1 kernel built from the linux-omap4-3.1.0
recipe which is the default when built using Yocto+meta-ti

n.b. this is the end of my experiments on this subject; I was only
trying to help in case it was a toolchain issue since I have the old
tools still around.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------