[meta-ti] [master][PATCH 1/2 v2] kernel.bbclass: Pull in kernel.bbclass from oe-core master
Denys Dmytriyenko
denys at ti.com
Tue Aug 20 15:17:56 PDT 2013
On Tue, Aug 20, 2013 at 03:47:10PM -0400, Cooper Jr., Franklin wrote:
> The issue this patch set is fixing isn't an Arago distro only problem but
> rather a problem faced by anyone using a newer version of u-boot.
Yes, I understand that. But at the same time meta-ti is used much wider and
overlaying a core class is very risky and not recommended. Previously we also
had rather generic fixes applied to kernel.bbclass and still kept it in
meta-arago...
--
Denys
> > -----Original Message-----
> > From: Dmytriyenko, Denys
> > Sent: Tuesday, August 20, 2013 2:42 PM
> > To: Cooper Jr., Franklin
> > Cc: meta-ti at yoctoproject.org
> > Subject: Re: [meta-ti] [master][PATCH 1/2 v2] kernel.bbclass: Pull in
> > kernel.bbclass from oe-core master
> >
> > Why meta-ti and not meta-arago where we've overlayed kernel.bbclass several
> > times in the past?
> >
> > --
> > Denys
> >
> >
> > On Tue, Aug 20, 2013 at 02:20:31PM -0500, Franklin S. Cooper Jr wrote:
> > > * Pull in kernel.bbclass from oe-core master to allow patching of the local
> > > version of kernel.bbclass until upstream patch is accepted and pulled into
> > > oe-core master.
> > >
> > > Signed-off-by: Franklin S. Cooper Jr <fcooper at ti.com>
> > > ---
> > > Version 2 changes:
> > > Fix commit message that mentioned dylan instead of master
> > >
> > > classes/kernel.bbclass | 389
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> > > 1 files changed, 389 insertions(+), 0 deletions(-)
> > > create mode 100644 classes/kernel.bbclass
> > >
> > > diff --git a/classes/kernel.bbclass b/classes/kernel.bbclass
> > > new file mode 100644
> > > index 0000000..e039dfc
> > > --- /dev/null
> > > +++ b/classes/kernel.bbclass
> > > @@ -0,0 +1,389 @@
> > > +inherit linux-kernel-base module_strip kernel-module-split
> > > +
> > > +PROVIDES += "virtual/kernel"
> > > +DEPENDS += "virtual/${TARGET_PREFIX}binutils
> > virtual/${TARGET_PREFIX}gcc kmod-native depmodwrapper-cross"
> > > +
> > > +# we include gcc above, we dont need virtual/libc
> > > +INHIBIT_DEFAULT_DEPS = "1"
> > > +
> > > +KERNEL_IMAGETYPE ?= "zImage"
> > > +INITRAMFS_IMAGE ?= ""
> > > +INITRAMFS_TASK ?= ""
> > > +
> > > +python __anonymous () {
> > > + kerneltype = d.getVar('KERNEL_IMAGETYPE', True) or ''
> > > + if kerneltype == 'uImage':
> > > + depends = d.getVar("DEPENDS", True)
> > > + depends = "%s u-boot-mkimage-native" % depends
> > > + d.setVar("DEPENDS", depends)
> > > +
> > > + image = d.getVar('INITRAMFS_IMAGE', True)
> > > + if image:
> > > + d.setVar('INITRAMFS_TASK', '${INITRAMFS_IMAGE}:do_rootfs')
> > > +}
> > > +
> > > +inherit kernel-arch deploy
> > > +
> > > +PACKAGES_DYNAMIC += "^kernel-module-.*"
> > > +PACKAGES_DYNAMIC += "^kernel-image-.*"
> > > +PACKAGES_DYNAMIC += "^kernel-firmware-.*"
> > > +
> > > +export OS = "${TARGET_OS}"
> > > +export CROSS_COMPILE = "${TARGET_PREFIX}"
> > > +
> > > +KERNEL_PRIORITY ?= "${@int(d.getVar('PV',1).split('-
> > ')[0].split('+')[0].split('.')[0]) * 10000 + \
> > > + int(d.getVar('PV',1).split('-')[0].split('+')[0].split('.')[1]) * 100 + \
> > > + int(d.getVar('PV',1).split('-')[0].split('+')[0].split('.')[-1])}"
> > > +
> > > +KERNEL_RELEASE ?= "${KERNEL_VERSION}"
> > > +
> > > +# Where built kernel lies in the kernel tree
> > > +KERNEL_OUTPUT ?= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"
> > > +KERNEL_IMAGEDEST = "boot"
> > > +
> > > +#
> > > +# configuration
> > > +#
> > > +export CMDLINE_CONSOLE = "console=${@d.getVar("KERNEL_CONSOLE",1)
> > or "ttyS0"}"
> > > +
> > > +KERNEL_VERSION = "${@get_kernelversion('${B}')}"
> > > +
> > > +KERNEL_LOCALVERSION ?= ""
> > > +
> > > +# kernels are generally machine specific
> > > +PACKAGE_ARCH = "${MACHINE_ARCH}"
> > > +
> > > +# U-Boot support
> > > +UBOOT_ENTRYPOINT ?= "20008000"
> > > +UBOOT_LOADADDRESS ?= "${UBOOT_ENTRYPOINT}"
> > > +
> > > +# Some Linux kernel configurations need additional parameters on the
> > command line
> > > +KERNEL_EXTRA_ARGS ?= ""
> > > +
> > > +# For the kernel, we don't want the '-e MAKEFLAGS=' in EXTRA_OEMAKE.
> > > +# We don't want to override kernel Makefile variables from the environment
> > > +EXTRA_OEMAKE = ""
> > > +
> > > +KERNEL_ALT_IMAGETYPE ??= ""
> > > +
> > > +# Define where the kernel headers are installed on the target as well as
> > where
> > > +# they are staged.
> > > +KERNEL_SRC_PATH = "/usr/src/kernel"
> > > +
> > > +KERNEL_IMAGETYPE_FOR_MAKE = "${@(lambda s: s[:-3] if s[-3:] == ".gz"
> > else s)(d.getVar('KERNEL_IMAGETYPE', True))}"
> > > +
> > > +kernel_do_compile() {
> > > + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
> > > + oe_runmake ${KERNEL_IMAGETYPE_FOR_MAKE}
> > ${KERNEL_ALT_IMAGETYPE} CC="${KERNEL_CC}" LD="${KERNEL_LD}"
> > ${KERNEL_EXTRA_ARGS}
> > > + if test "${KERNEL_IMAGETYPE_FOR_MAKE}.gz" =
> > "${KERNEL_IMAGETYPE}"; then
> > > + gzip -9c < "${KERNEL_IMAGETYPE_FOR_MAKE}" >
> > "${KERNEL_OUTPUT}"
> > > + fi
> > > +}
> > > +
> > > +do_compile_kernelmodules() {
> > > + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
> > > + if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
> > > + oe_runmake ${PARALLEL_MAKE} modules CC="${KERNEL_CC}"
> > LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
> > > + else
> > > + bbnote "no modules to compile"
> > > + fi
> > > +}
> > > +addtask compile_kernelmodules after do_compile before do_strip
> > > +
> > > +kernel_do_install() {
> > > + #
> > > + # First install the modules
> > > + #
> > > + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
> > > + if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
> > > + oe_runmake DEPMOD=echo INSTALL_MOD_PATH="${D}"
> > modules_install
> > > + rm "${D}/lib/modules/${KERNEL_VERSION}/build"
> > > + rm "${D}/lib/modules/${KERNEL_VERSION}/source"
> > > + else
> > > + bbnote "no modules to install"
> > > + fi
> > > +
> > > + #
> > > + # Install various kernel output (zImage, map file, config, module support
> > files)
> > > + #
> > > + install -d ${D}/${KERNEL_IMAGEDEST}
> > > + install -d ${D}/boot
> > > + install -m 0644 ${KERNEL_OUTPUT}
> > ${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
> > > + install -m 0644 System.map ${D}/boot/System.map-
> > ${KERNEL_VERSION}
> > > + install -m 0644 .config ${D}/boot/config-${KERNEL_VERSION}
> > > + install -m 0644 vmlinux ${D}/boot/vmlinux-${KERNEL_VERSION}
> > > + [ -e Module.symvers ] && install -m 0644 Module.symvers
> > ${D}/boot/Module.symvers-${KERNEL_VERSION}
> > > + install -d ${D}${sysconfdir}/modules-load.d
> > > + install -d ${D}${sysconfdir}/modprobe.d
> > > +
> > > + #
> > > + # Support for external module building - create a minimal copy of the
> > > + # kernel source tree.
> > > + #
> > > + kerneldir=${D}${KERNEL_SRC_PATH}
> > > + install -d $kerneldir
> > > +
> > > + #
> > > + # Store the kernel version in sysroots for module-base.bbclass
> > > + #
> > > +
> > > + echo "${KERNEL_VERSION}" > $kerneldir/kernel-abiversion
> > > +
> > > + #
> > > + # Store kernel image name to allow use during image generation
> > > + #
> > > +
> > > + echo "${KERNEL_IMAGE_BASE_NAME}" >$kerneldir/kernel-image-
> > name
> > > +
> > > + #
> > > + # Copy the entire source tree. In case an external build directory is
> > > + # used, copy the build directory over first, then copy over the source
> > > + # dir. This ensures the original Makefiles are used and not the
> > > + # redirecting Makefiles in the build directory.
> > > + #
> > > + # work and sysroots can be on different partitions, so we can't rely on
> > > + # hardlinking, unfortunately.
> > > + #
> > > + find . -depth -not -name "*.cmd" -not -name "*.o" -not -path "./.*" -
> > print0 | cpio --null -pdu $kerneldir
> > > + cp .config $kerneldir
> > > + if [ "${S}" != "${B}" ]; then
> > > + pwd="$PWD"
> > > + cd "${S}"
> > > + find . -depth -not -path "./.*" -print0 | cpio --null -pdu
> > $kerneldir
> > > + cd "$pwd"
> > > + fi
> > > + install -m 0644 ${KERNEL_OUTPUT} $kerneldir/${KERNEL_IMAGETYPE}
> > > + install -m 0644 System.map $kerneldir/System.map-
> > ${KERNEL_VERSION}
> > > +
> > > + #
> > > + # Clean and remove files not needed for building modules.
> > > + # Some distributions go through a lot more trouble to strip out
> > > + # unecessary headers, for now, we just prune the obvious bits.
> > > + #
> > > + # We don't want to leave host-arch binaries in /sysroots, so
> > > + # we clean the scripts dir while leaving the generated config
> > > + # and include files.
> > > + #
> > > + oe_runmake -C $kerneldir CC="${KERNEL_CC}" LD="${KERNEL_LD}"
> > clean
> > > + make -C $kerneldir _mrproper_scripts
> > > + find $kerneldir -path $kerneldir/lib -prune -o -path $kerneldir/tools -
> > prune -o -path $kerneldir/scripts -prune -o -name "*.[csS]" -exec rm '{}' \;
> > > + find $kerneldir/Documentation -name "*.txt" -exec rm '{}' \;
> > > +
> > > + # As of Linux kernel version 3.0.1, the clean target removes
> > > + # arch/powerpc/lib/crtsavres.o which is present in
> > > + # KBUILD_LDFLAGS_MODULE, making it required to build external
> > modules.
> > > + if [ ${ARCH} = "powerpc" ]; then
> > > + cp arch/powerpc/lib/crtsavres.o
> > $kerneldir/arch/powerpc/lib/crtsavres.o
> > > + fi
> > > +
> > > + # Necessary for building modules like compat-wireless.
> > > + if [ -f include/generated/bounds.h ]; then
> > > + cp include/generated/bounds.h
> > $kerneldir/include/generated/bounds.h
> > > + fi
> > > + if [ -d arch/${ARCH}/include/generated ]; then
> > > + mkdir -p $kerneldir/arch/${ARCH}/include/generated/
> > > + cp -fR arch/${ARCH}/include/generated/*
> > $kerneldir/arch/${ARCH}/include/generated/
> > > + fi
> > > +
> > > + # Remove the following binaries which cause strip or arch QA errors
> > > + # during do_package for cross-compiled platforms
> > > + bin_files="arch/powerpc/boot/addnote arch/powerpc/boot/hack-coff
> > \
> > > + arch/powerpc/boot/mktree scripts/kconfig/zconf.tab.o \
> > > + scripts/kconfig/conf.o scripts/kconfig/kxgettext.o"
> > > + for entry in $bin_files; do
> > > + rm -f $kerneldir/$entry
> > > + done
> > > +
> > > + # kernels <2.6.30 don't have $kerneldir/tools directory so we check if it
> > exists before calling sed
> > > + if [ -f $kerneldir/tools/perf/Makefile ]; then
> > > + # Fix SLANG_INC for slang.h
> > > + sed -i 's#-I/usr/include/slang#-I=/usr/include/slang#g'
> > $kerneldir/tools/perf/Makefile
> > > + fi
> > > +}
> > > +do_install[prefuncs] += "package_get_auto_pr"
> > > +
> > > +sysroot_stage_all_append() {
> > > + sysroot_stage_dir ${D}${KERNEL_SRC_PATH}
> > ${SYSROOT_DESTDIR}${KERNEL_SRC_PATH}
> > > +}
> > > +
> > > +kernel_do_configure() {
> > > + # fixes extra + in /lib/modules/2.6.37+
> > > + # $ scripts/setlocalversion . => +
> > > + # $ make kernelversion => 2.6.37
> > > + # $ make kernelrelease => 2.6.37+
> > > + touch ${B}/.scmversion ${S}/.scmversion
> > > +
> > > + # Copy defconfig to .config if .config does not exist. This allows
> > > + # recipes to manage the .config themselves in do_configure_prepend().
> > > + if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
> > > + cp "${WORKDIR}/defconfig" "${B}/.config"
> > > + fi
> > > + yes '' | oe_runmake oldconfig
> > > +
> > > + if [ ! -z "${INITRAMFS_IMAGE}" ]; then
> > > + for img in cpio.gz cpio.lzo cpio.lzma cpio.xz; do
> > > + if [ -e "${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-
> > ${MACHINE}.$img" ]; then
> > > + cp "${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-
> > ${MACHINE}.$img" initramfs.$img
> > > + fi
> > > + done
> > > + fi
> > > +}
> > > +
> > > +do_configure[depends] += "${INITRAMFS_TASK}"
> > > +
> > > +do_savedefconfig() {
> > > + oe_runmake savedefconfig
> > > +}
> > > +do_savedefconfig[nostamp] = "1"
> > > +addtask savedefconfig after do_configure
> > > +
> > > +inherit cml1
> > > +
> > > +EXPORT_FUNCTIONS do_compile do_install do_configure
> > > +
> > > +# kernel-base becomes kernel-${KERNEL_VERSION}
> > > +# kernel-image becomes kernel-image-${KERNEL_VERISON}
> > > +PACKAGES = "kernel kernel-base kernel-vmlinux kernel-image kernel-dev
> > kernel-modules"
> > > +FILES_${PN} = ""
> > > +FILES_kernel-base = "/lib/modules/${KERNEL_VERSION}/modules.order
> > /lib/modules/${KERNEL_VERSION}/modules.builtin"
> > > +FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}*"
> > > +FILES_kernel-dev = "/boot/System.map* /boot/Module.symvers*
> > /boot/config* ${KERNEL_SRC_PATH}"
> > > +FILES_kernel-vmlinux = "/boot/vmlinux*"
> > > +FILES_kernel-modules = ""
> > > +RDEPENDS_kernel = "kernel-base"
> > > +# Allow machines to override this dependency if kernel image files are
> > > +# not wanted in images as standard
> > > +RDEPENDS_kernel-base ?= "kernel-image"
> > > +PKG_kernel-image = "kernel-image-
> > ${@legitimize_package_name('${KERNEL_VERSION}')}"
> > > +PKG_kernel-base = "kernel-
> > ${@legitimize_package_name('${KERNEL_VERSION}')}"
> > > +RPROVIDES_kernel-base += "kernel-${KERNEL_VERSION}"
> > > +ALLOW_EMPTY_kernel = "1"
> > > +ALLOW_EMPTY_kernel-base = "1"
> > > +ALLOW_EMPTY_kernel-image = "1"
> > > +ALLOW_EMPTY_kernel-modules = "1"
> > > +DESCRIPTION_kernel-modules = "Kernel modules meta package"
> > > +
> > > +pkg_postinst_kernel-image () {
> > > + update-alternatives --install
> > /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}
> > ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
> > > + if [ ! -e "$D/lib/modules/${KERNEL_VERSION}" ]; then
> > > + mkdir -p $D/lib/modules/${KERNEL_VERSION}
> > > + fi
> > > + if [ -n "$D" ]; then
> > > + depmodwrapper -a -b $D ${KERNEL_VERSION}
> > > + else
> > > + depmod -a ${KERNEL_VERSION}
> > > + fi
> > > +}
> > > +
> > > +pkg_postrm_kernel-image () {
> > > + update-alternatives --remove ${KERNEL_IMAGETYPE}
> > ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} || true
> > > +}
> > > +
> > > +PACKAGESPLITFUNCS_prepend = "split_kernel_packages "
> > > +
> > > +python split_kernel_packages () {
> > > + do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.bin$',
> > output_pattern='kernel-firmware-%s', description='Firmware for %s',
> > recursive=True, extra_depends='')
> > > + do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.fw$',
> > output_pattern='kernel-firmware-%s', description='Firmware for %s',
> > recursive=True, extra_depends='')
> > > + do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.cis$',
> > output_pattern='kernel-firmware-%s', description='Firmware for %s',
> > recursive=True, extra_depends='')
> > > +}
> > > +
> > > +do_strip() {
> > > + if [ -n "${KERNEL_IMAGE_STRIP_EXTRA_SECTIONS}" ]; then
> > > + if [[ "${KERNEL_IMAGETYPE}" != "vmlinux" ]]; then
> > > + bbwarn "image type will not be stripped (not
> > supported): ${KERNEL_IMAGETYPE}"
> > > + return
> > > + fi
> > > +
> > > + cd ${B}
> > > + headers=`"$CROSS_COMPILE"readelf -S ${KERNEL_OUTPUT} |
> > \
> > > + grep "^ \{1,\}\[[0-9 ]\{1,\}\] [^ ]" | \
> > > + sed "s/^ \{1,\}\[[0-9 ]\{1,\}\] //" | \
> > > + gawk '{print $1}'`
> > > +
> > > + for str in ${KERNEL_IMAGE_STRIP_EXTRA_SECTIONS}; do {
> > > + if [[ "$headers" != *"$str"* ]]; then
> > > + bbwarn "Section not found: $str";
> > > + fi
> > > +
> > > + "$CROSS_COMPILE"strip -s -R $str ${KERNEL_OUTPUT}
> > > + }; done
> > > +
> > > + bbnote "KERNEL_IMAGE_STRIP_EXTRA_SECTIONS is set,
> > stripping sections:" \
> > > + "${KERNEL_IMAGE_STRIP_EXTRA_SECTIONS}"
> > > + fi;
> > > +}
> > > +do_strip[dirs] = "${B}"
> > > +
> > > +addtask do_strip before do_sizecheck after do_kernel_link_vmlinux
> > > +
> > > +# Support checking the kernel size since some kernels need to reside in
> > partitions
> > > +# with a fixed length or there is a limit in transferring the kernel to memory
> > > +do_sizecheck() {
> > > + if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then
> > > + cd ${B}
> > > + size=`ls -lL ${KERNEL_OUTPUT} | awk '{ print $5}'`
> > > + if [ $size -ge ${KERNEL_IMAGE_MAXSIZE} ]; then
> > > + die "This kernel (size=$size >
> > ${KERNEL_IMAGE_MAXSIZE}) is too big for your device. Please reduce the size
> > of the kernel by making more of it modular."
> > > + fi
> > > + fi
> > > +}
> > > +do_sizecheck[dirs] = "${B}"
> > > +
> > > +addtask sizecheck before do_install after do_strip
> > > +
> > > +KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PKGE}-
> > ${PKGV}-${PKGR}-${MACHINE}-${DATETIME}"
> > > +# Don't include the DATETIME variable in the sstate package signatures
> > > +KERNEL_IMAGE_BASE_NAME[vardepsexclude] = "DATETIME"
> > > +KERNEL_IMAGE_SYMLINK_NAME ?= "${KERNEL_IMAGETYPE}-${MACHINE}"
> > > +MODULE_IMAGE_BASE_NAME ?= "modules-${PKGE}-${PKGV}-${PKGR}-
> > ${MACHINE}-${DATETIME}"
> > > +MODULE_IMAGE_BASE_NAME[vardepsexclude] = "DATETIME"
> > > +MODULE_TARBALL_BASE_NAME ?= "${MODULE_IMAGE_BASE_NAME}.tgz"
> > > +# Don't include the DATETIME variable in the sstate package signatures
> > > +MODULE_TARBALL_SYMLINK_NAME ?= "modules-${MACHINE}.tgz"
> > > +MODULE_TARBALL_DEPLOY ?= "1"
> > > +
> > > +do_uboot_mkimage() {
> > > + if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then
> > > + if test "x${KEEPUIMAGE}" != "xyes" ; then
> > > + ENTRYPOINT=${UBOOT_ENTRYPOINT}
> > > + if test -n "${UBOOT_ENTRYSYMBOL}"; then
> > > + ENTRYPOINT=`${HOST_PREFIX}nm
> > ${S}/vmlinux | \
> > > + awk
> > '$3=="${UBOOT_ENTRYSYMBOL}" {print $1}'`
> > > + fi
> > > + if test -e arch/${ARCH}/boot/compressed/vmlinux ;
> > then
> > > + ${OBJCOPY} -O binary -R .note -R .comment -S
> > arch/${ARCH}/boot/compressed/vmlinux linux.bin
> > > + uboot-mkimage -A ${UBOOT_ARCH} -O linux -
> > T kernel -C none -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
> > "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin
> > arch/${ARCH}/boot/uImage
> > > + rm -f linux.bin
> > > + else
> > > + ${OBJCOPY} -O binary -R .note -R .comment -S
> > vmlinux linux.bin
> > > + rm -f linux.bin.gz
> > > + gzip -9 linux.bin
> > > + uboot-mkimage -A ${UBOOT_ARCH} -O linux -
> > T kernel -C gzip -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
> > "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin.gz
> > arch/${ARCH}/boot/uImage
> > > + rm -f linux.bin.gz
> > > + fi
> > > + fi
> > > + fi
> > > +}
> > > +
> > > +addtask uboot_mkimage before do_install after do_compile
> > > +
> > > +kernel_do_deploy() {
> > > + install -m 0644 ${KERNEL_OUTPUT}
> > ${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
> > > + if [ ${MODULE_TARBALL_DEPLOY} = "1" ] && (grep -q -i -e
> > '^CONFIG_MODULES=y$' .config); then
> > > + mkdir -p ${D}/lib
> > > + tar -cvzf ${DEPLOYDIR}/${MODULE_TARBALL_BASE_NAME} -C
> > ${D} lib
> > > + ln -sf ${MODULE_TARBALL_BASE_NAME}
> > ${DEPLOYDIR}/${MODULE_TARBALL_SYMLINK_NAME}
> > > + fi
> > > +
> > > + ln -sf ${KERNEL_IMAGE_BASE_NAME}.bin
> > ${DEPLOYDIR}/${KERNEL_IMAGE_SYMLINK_NAME}.bin
> > > + ln -sf ${KERNEL_IMAGE_BASE_NAME}.bin
> > ${DEPLOYDIR}/${KERNEL_IMAGETYPE}
> > > +
> > > + cp ${COREBASE}/meta/files/deploydir_readme.txt
> > ${DEPLOYDIR}/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
> > > +}
> > > +do_deploy[dirs] = "${DEPLOYDIR} ${B}"
> > > +do_deploy[prefuncs] += "package_get_auto_pr"
> > > +
> > > +addtask deploy before do_build after do_install
> > > +
> > > +EXPORT_FUNCTIONS do_deploy
> > > +
> > > --
> > > 1.7.0.4
> > >
> > > _______________________________________________
> > > meta-ti mailing list
> > > meta-ti at yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/meta-ti
More information about the meta-ti
mailing list