[meta-ti] [PATCH 1/7] machine config: Correct SERIAL_CONSOLE variable for am3517-evm and am37x-evm

[fcooperjr27 at gmail.com]

From: Franklin S. Cooper Jr <fcooper at ti.com>

* When testing on am37x-evm I noticed that no prompt to login was ever shown
  when connected via serial port.
* I finally noticed that the SERIAL_CONSOLE variable was set incorrectly and
  didn't match the value in the old Arago layer.
* After using the values specific in the machine file in the Arago layer I was
  able to login via serial port.
* This has been verified on both the am37x-evm and am3517-evm.

Signed-off-by: Franklin S. Cooper Jr <fcooper at ti.com>
---
 conf/machine/am3517-evm.conf |    2 +-
 conf/machine/am37x-evm.conf  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/conf/machine/am3517-evm.conf b/conf/machine/am3517-evm.conf
index e817069..536d337 100644
--- a/conf/machine/am3517-evm.conf
+++ b/conf/machine/am3517-evm.conf
@@ -19,7 +19,7 @@ require conf/machine/include/omap3.inc
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 USE_VT = "2"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
diff --git a/conf/machine/am37x-evm.conf b/conf/machine/am37x-evm.conf
index 9a1acb4..866abc5 100644
--- a/conf/machine/am37x-evm.conf
+++ b/conf/machine/am37x-evm.conf
@@ -19,7 +19,7 @@ require conf/machine/include/omap3.inc
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS0"
+SERIAL_CONSOLE = "115200 ttyO0"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
 
-- 
1.7.0.4