[meta-ti] [PATCH 7/7] u-boot_2012.04.01: Add latest u-boot recipe for am37x-evm

[Denys Dmytriyenko]

On Mon, Feb 11, 2013 at 07:04:42PM -0600, fcooperjr27 at gmail.com wrote:
> From: Franklin S. Cooper Jr <fcooper at ti.com>
> 
> Signed-off-by: Franklin S. Cooper Jr <fcooper at ti.com>
> ---
> 
> diff --git a/recipes-bsp/u-boot/u-boot_2012.04.01.bb b/recipes-bsp/u-boot/u-boot_2012.04.01.bb
> new file mode 100644
> index 0000000..e193124
> --- /dev/null
> +++ b/recipes-bsp/u-boot/u-boot_2012.04.01.bb
> @@ -0,0 +1,50 @@
> +require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc
> +
> +DESCRIPTION = "u-boot bootloader for ARM MPU devices"
> +# Use the version of u-boot.inc in oe-core not the meta-ti version

This comment is out of place. I'll move it to the top of the recipe...

> +
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
> +
> +DEFAULT_PREFERENCE = "-1"
> +
> +COMPATIBLE_MACHINE = "am37x-evm|beagleboard"
> +
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
> +
> +BRANCH ?= "master"
> +
> +SRCREV = "v2012.04.01"
> +
> +S = "${WORKDIR}/git"
> +
> +SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;branch=${BRANCH}"
> +
> +# Add patches for the AMSDK
> +#  - 0001-omap3-beagle-add-usbethaddr....Not for Upstream
> +#  - 0001-OMAP3-Beagle-Set-BOOTDELAY....Pending Upstream
> +#  - 0002-am335x-am3517evm-beagleboard....Pending Upstream
> +#  - 0003-beagleboard-Load-uImage-from....Not for Upstream
> +#  - 0004-beagleboard-Load-uImage-to....Pending Upstream
> +#  - 0001-omap3_evm-Added-function....Pending Upstream
> +#  - 0002-omap3evm-Make-the-board....Pending Upstream
> +#  - 0003-beagleboard-Make-xM-rev....Pending Upstream
> +#  - 0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch....Upstreamed
> +
> +# Add a patch to set a default usbethaddr address to enable the out of box
> +# experience.
> +SRC_URI += "file://0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch \
> +            file://0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch \
> +            file://0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch \
> +            file://0003-beagleboard-Load-uImage-from-VFAT-by-default.patch \
> +            file://0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch \
> +            file://0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch \
> +            file://0002-omap3evm-Make-the-board-start-at-800MHz.patch \
> +            file://0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch \
> +            file://0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch \
> +            "
> +
> +UBOOT_SUFFIX = "img"
> +
> +# Set the name of the SPL that will built so that it is also packaged with u-boot.
> +SPL_BINARY = "MLO"
> -- 
> 1.7.0.4