[meta-ti] Which machine type to use for DaVinci DM6446 and TI816x?

[Maupin, Chase]

From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-bounces at yoctoproject.org] On Behalf Of Brian Hutchinson
Sent: Wednesday, July 17, 2013 8:08 AM
To: Dmytriyenko, Denys
Cc: meta-ti at yoctoproject.org
Subject: Re: [meta-ti] Which machine type to use for DaVinci DM6446 and TI816x?

On Wed, Jul 10, 2013 at 12:46 PM, Denys Dmytriyenko <denys at ti.com<mailto:denys at ti.com>> wrote:

DM6446 is quite different from OMAP-L138. Both AM180x and DA850 are just
derivatives of OMAP-L138.

Anyway, DM6446 is no longer supported, as it's a very old platform.


> I've always used Arago or Angstrom for DM6446 support in the past and so
> I'm not sure which .conf I should be using with meta-ti.  My gut says use
> am1808-evm.conf but I thought I should ask to be sure.
--
Denys

So how hard is it to get ti816x machine support moved up into Dylan (or master)?  I've always had machine support for the branches I used in the past ... now I find myself needing Dylan or even master and there is no ti816x support there.

Is it not there just because nobody had hardware to test it?  If so, I'm game to add it with some guidance :)

[CEM] Generally not too hard.  You can often start with the old arago machine and move that in with some cleanup.  Then you will need to move/create the bootloader and kernel recipes as well, again looking for cleanup.  That should give you a basic working system.  The main issue is that someone needs to be signed up to keep those recipes working and up to date.  That is what is missing in most cases is a maitainer.

Even better, for you use I would recommend looking at commit c586bd9a66 which is the one that removed these configs and then add back the pieces you need.


Regards,

Brian


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20130717/54de569f/attachment.html>