[meta-ti] Is this the correct list for AM3517 EVM questions?

[Steven Grunza]

On 3/20/2013 1:54 PM, Denys Dmytriyenko wrote:
> On Wed, Mar 20, 2013 at 01:48:21PM -0400, Steven Grunza wrote:
>> On 3/20/2013 11:17 AM, Denys Dmytriyenko wrote:
>>> On Wed, Mar 20, 2013 at 10:23:34AM -0400, Steven Grunza wrote:
>>>> On 3/19/2013 2:27 PM, Denys Dmytriyenko wrote:
>>>>> On Tue, Mar 19, 2013 at 02:08:52PM -0400, Steven Grunza wrote:
>>>>>> On 3/19/2013 1:21 PM, Denys Dmytriyenko wrote:
>>>>>>> On Tue, Mar 19, 2013 at 10:18:33AM -0400, Steven Grunza wrote:
>>>>>>>> Hello,
>>>>>>>>    I have a LogicPD Zoom AM3517 experimenters board.  Is this the
>>>>>>>> correct list to ask questions about getting Yocto-based software
>>>>>>>> running on this board?
>>>>>>> Yes, this is one of the correct lists for asking questions about AM3517 board
>>>>>>> when used with the Yocto Project. :) As this is the mailing list for meta-ti,
>>>>>>> which is the official Texas Instruments BSP layer for OpenEmbedded-Core and
>>>>>>> the Yocto Project, and AM3517 is currently one of the supported platforms in
>>>>>>> meta-ti.
>>>>>>>
>>>>>> Wonderful.  Can someone point me to information so that I can build
>>>>>> a system using the Yocto project and program an SD card with the
>>>>>> necessary files to boot my board into Linux?
>>>>>>
>>>>>>    With all of the S7 DIP switches in the off position (which the
>>>>>> AM3517 Development Kits User Manual indicates is the default boot
>>>>> >from NAND) I don't get any output from the serial UART so my guess
>>>>>> is that I've hosed the NAND.
>>>>>>
>>>>>>    For debugging support I have a TI Stellaris LM3S8962 board which
>>>>>> has the ability to act as a JTAG debugger to external hardware.  For
>>>>>> software I have OpenOCD 0.6.1
>>>>> I would assume you already checked this Hardware Setup page:
>>>>> http://processors.wiki.ti.com/index.php/GSG:_AM35x_EVM_Hardware_Setup
>>>>>
>>>>> Then you would need to check the Boot from SD/MMC page:
>>>>> http://processors.wiki.ti.com/index.php/AM35x_EVM_Boot_from_SD/MMC_card
>>>>>
>>>>> As of the software load, you can build a minimal rootfs image (e.g.
>>>>> core-image-minimal) with all the BSP components and setup an SD card as
>>>>> described above. You'll get the MLO, u-boot, uImage and rootfs as the
>>>>> output of the build, that you need to load on to the card.
>>>> To what should I have MACHINE set?  Using beagleboard didn't work.
>>> There is "am3517-evm" machine in meta-ti:
>>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/conf/machine
>>>
>> What is the proper way to include the above file in my build
>> environment or is there a URL describing it that I've missed?
> You need to add meta-ti layer to your configuration. It can be as easy as
> git-cloning it into your sources location, along with other "meta" layers and
> adding it to your bblayers.conf file. You'd need to also add BBMASK to your
> local.conf, as described in meta-ti README file. After that you can build for
> MACHINE=am3517-evm
>

I did something wrong or missed a step.  I got:

grunzasr at stm32dbg:/home/yocto/poky-danny-8.0/build$ bitbake 
core-image-sato-sdk
Pseudo is not present but is required, building this first before the 
main build
Parsing recipes: 100% 
|#####################################################################################################| 
Time: 00:02:17
Parsing of 899 .bb files complete (0 cached, 899 parsed). 1205 targets, 
67 skipped, 7 masked, 0 errors.
ERROR: No recipes available for:
/home/yocto/poky-danny-8.0/meta-ti/recipes-graphics/mesa/mesa-dri_9.0.2.bbappend
ERROR: Command execution failed: Exited with 1

I put the meta-ti (via a git clone) into /home/yocto/poky-danny-8.0

grunzasr at stm32dbg:/home/yocto/poky-danny-8.0/build$ ls -l 
/home/yocto/poky-danny-8.0
total 72
drwxrwxr-x  6 grunzasr grunzasr  4096 Oct 22 19:03 bitbake
drwxrwxr-x  6 grunzasr grunzasr  4096 Mar 20 14:11 build
drwxrwxr-x 11 grunzasr grunzasr  4096 Oct 22 19:03 documentation
-rw-rw-r--  1 grunzasr grunzasr   545 Oct 22 19:03 LICENSE
drwxrwxr-x 21 grunzasr grunzasr  4096 Oct 22 19:03 meta
drwxrwxr-x  4 grunzasr grunzasr  4096 Oct 22 19:03 meta-hob
drwxrwxr-x  5 grunzasr grunzasr  4096 Oct 22 19:03 meta-skeleton
drwxr-xr-x 12 grunzasr grunzasr  4096 Mar 20 14:04 meta-ti
drwxrwxr-x  6 grunzasr grunzasr  4096 Oct 22 19:03 meta-yocto
drwxrwxr-x  9 grunzasr grunzasr  4096 Oct 22 19:03 meta-yocto-bsp
-rwxrwxr-x  1 grunzasr grunzasr  1531 Oct 22 19:03 oe-init-build-env
-rw-rw-r--  1 grunzasr grunzasr  2038 Oct 22 19:03 README
-rw-rw-r--  1 grunzasr grunzasr 17245 Oct 22 19:03 README.hardware
drwxrwxr-x  8 grunzasr grunzasr  4096 Oct 22 19:03 scripts

Is there another meta package I need?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20130320/0fa87049/attachment.html>