[meta-ti] [PATCH 01/10] libgles-omap3: Remove X11 related build and packaging
Sundareson, Prabindh
prabu at ti.com
Tue May 14 19:48:13 PDT 2013
Denys,
Thanks for the review. I will resubmit the patch-set for review - with below comments implemented.
regards,
Prabu
-----Original Message-----
From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-bounces at yoctoproject.org] On Behalf Of Dmytriyenko, Denys
Sent: Tuesday, May 14, 2013 11:17 PM
To: Maupin, Chase
Cc: meta-ti at yoctoproject.org
Subject: Re: [meta-ti] [PATCH 01/10] libgles-omap3: Remove X11 related build and packaging
Prabu,
I don't think I have any more comments, than for 01, 06 and 08. Will you be re-submitting the entire set later? I'll go ahead and remove this set from my queue as it will be "superseded". Thanks!
--
Denys
On Tue, May 14, 2013 at 01:23:16PM -0400, Denys Dmytriyenko wrote:
> On Fri, May 10, 2013 at 01:27:09PM +0000, Maupin, Chase wrote:
> >
> > >-----Original Message-----
> > >From: Sundareson, Prabindh
> > >Sent: Friday, May 10, 2013 4:17 AM
> > >To: Maupin, Chase; meta-ti at yoctoproject.org
> > >Subject: RE: [meta-ti] [PATCH 01/10] libgles-omap3: Remove X11
> > >related build and packaging
> > >
> > >Chase, thanks for the review,
> > >
> > >1) Ok, I will add it. By "later recipe", you mean the separated
> > >x11 recipe, right ?
> >
> > Yes sir
> >
> > >
> > >2) Good point - I am ok to leave the old .inc and create a new one
> > >with the changes starting from 4.09 then. Is this ok ?
> >
> > I'm OK with the approach. Denys, any concern here?
>
> Sounds good - there are still some users of 4.08 out there...
>
>
> > >regards,
> > >Prabu
> > >
> > >
> > >-----Original Message-----
> > >From: Maupin, Chase
> > >Sent: Wednesday, May 08, 2013 6:48 PM
> > >To: Sundareson, Prabindh; meta-ti at yoctoproject.org
> > >Subject: RE: [meta-ti] [PATCH 01/10] libgles-omap3: Remove X11
> > >related build and packaging
> > >
> > >Prabu,
> > >
> > >Overall nice job. A couple of things I noticed.
> > >
> > >1. You removed the sample.desktop file but did not put it back in
> > >a later recipe.
> > >2. You modified the common .inc file and then added the X11 pieces
> > >back for 4.09.00.01. This would break people using the older
> > >recipes though. So would it perhaps be a good idea to leave the
> > >.inc alone and then create a new include file for newer recipe
> > >that do this split going forward? Or would it be simpler to
> > >provide the X11 package for the older versions as well? This is
> > >just a thought and I'm hoping others will chime in here.
> > >
> > >Thanks for the patches, it is really good to see this work being
> > >done :)
> > >
> > >> -----Original Message-----
> > >> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-
> > >> bounces at yoctoproject.org] On Behalf Of Sundareson, Prabindh
> > >> Sent: Thursday, May 02, 2013 8:39 AM
> > >> To: meta-ti at yoctoproject.org
> > >> Subject: [meta-ti] [PATCH 01/10] libgles-omap3: Remove X11
> > >related
> > >> build and packaging
> > >>
> > >> The SGX530 driver for X11 is only buildable and testable
> > >standalone
> > >> with the pre-built X11 package provided with the Graphics SDK.
> > >> This patch removes X11 build from the default recipe, to enable
> > >moving
> > >> X11 build to a separate recipe.
> > >>
> > >> This is part of a clean up of the Graphics recipe starting from
> > >> 4.09.00.01 version of the Graphics SDK.
> > >>
> > >> Signed-off-by: Prabindh Sundareson <prabu at ti.com>
> > >> ---
> > >> recipes-graphics/libgles/libgles-omap3.inc | 168 ++++-
> > >-
> > >> --------------
> > >> .../libgles/libgles-omap3_4.09.00.01.bb | 43 +----
> > >-
> > >> 2 files changed, 30 insertions(+), 181 deletions(-)
> > >>
> > >> diff --git a/recipes-graphics/libgles/libgles-omap3.inc
> > >> b/recipes-graphics/libgles/libgles-omap3.inc
> > >> index 9a90c56..130dc49 100644
> > >> --- a/recipes-graphics/libgles/libgles-omap3.inc
> > >> +++ b/recipes-graphics/libgles/libgles-omap3.inc
> > >> @@ -7,10 +7,6 @@ PR = "r35"
> > >>
> > >> COMPATIBLE_MACHINE = "(omap3|ti814x|ti816x|ti33x)"
> > >>
> > >> -X11DEPENDS = "virtual/libx11 libxau libxdmcp libdrm"
> > >> -DEPENDS = "${@base_contains('DISTRO_FEATURES', 'x11',
> > >> '${X11DEPENDS}', '', d)}"
> > >> -
> > >> -export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES',
> > >> 'x11', '1', '0', d)}"
> > >> PVR_INIT ?= "pvrsrvinit"
> > >>
> > >> PROVIDES += "virtual/egl virtual/libgles1 virtual/libgles2"
> > >> @@ -22,7 +18,6 @@ RREPLACES_${PN}-dbg = "libegl-dbg"
> > >> SRC_URI = "http://software-
> > >>
> > >dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> > >> }/exports/${BINFILE} \
> > >> file://cputype \
> > >> file://rc.pvr \
> > >> - file://sample.desktop \
> > >> file://99-bufferclass.rules \
> > >> "
> > >>
> > >> @@ -79,87 +74,53 @@ do_compile() {
> > >> export PLAT_CPP="${CXX}"
> > >> export PLAR_AR="${AR}"
> > >>
> > >> - if [ ${SUPPORT_XORG} -eq 1 ] ; then
> > >> - export X11ROOT="${STAGING_DIR_HOST}/usr"
> > >> - mkdir -p ${S}/demos/x11
> > >> - mkdir -p ${S}/trainingcourses/x11
> > >> - fi
> > >> -
> > >> mkdir -p ${S}/demos/raw
> > >> mkdir -p ${S}/trainingcourses/raw
> > >>
> > >> # Rebuild demos
> > >> - for X11BUILD in 0 1 ; do
> > >> - # Don't rebuild demos with X11 support for a non X11
> > >> distro
> > >> - if [ ${SUPPORT_XORG} -eq 0 -a $X11BUILD -eq 1 ] ;
> > >> then
> > >> - continue
> > >> - fi
> > >> + for demo in ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ;
> > >> do
> > >> + cd $demo/OGLES/Build/LinuxGeneric
> > >> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
> > >> + rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
> > >> +
> > >> + install -m 0755
> > >> $demo/OGLES/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw ||
> > >true
> > >> + done
> > >> +
> > >> + for demo in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ;
> > >> do
> > >> + cd $demo/OGLES2/Build/LinuxGeneric
> > >> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
> > >> + rm -f $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
> > >>
> > >> - for demo in
> > >> ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ; do
> > >> - cd $demo/OGLES/Build/LinuxGeneric
> > >> - oe_runmake Common=1 PLATFORM=${PLATFORM}
> > >> X11BUILD=$X11BUILD
> > >> - rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
> > >> -
> > >> - if [ $X11BUILD -eq 1 ] ; then
> > >> - install -m 0755
> > >> $demo/OGLES/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 ||
> > >true
> > >> - sed -e s:NAME:$(basename $demo): \
> > >> - -e
> > >> s:EXEC:${bindir}/SGX/demos/X11/$(basename
> > >> $demo/OGLES/Build/${PLATFORM}/ReleaseX11/*): \
> > >> - ${WORKDIR}/sample.desktop >
> > >> ${WORKDIR}/$(basename $demo).desktop
> > >> - else
> > >> - install -m 0755
> > >> $demo/OGLES/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw ||
> > >true
> > >> - fi
> > >> - done
> > >> -
> > >> - for demo in
> > >> ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ; do
> > >> - cd $demo/OGLES2/Build/LinuxGeneric
> > >> - oe_runmake Common=1 PLATFORM=${PLATFORM}
> > >> X11BUILD=$X11BUILD
> > >> - rm -f
> > >> $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
> > >> -
> > >> - if [ $X11BUILD -eq 1 ] ; then
> > >> - install -m 0755
> > >> $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 ||
> > >true
> > >> - sed -e s:NAME:$(basename $demo): \
> > >> - -e
> > >> s:EXEC:${bindir}/SGX/demos/X11/$(basename
> > >> $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/*): \
> > >> - ${WORKDIR}/sample.desktop >
> > >> ${WORKDIR}/$(basename $demo).desktop
> > >> - else
> > >> - install -m 0755
> > >> $demo/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw ||
> > >true
> > >> - fi
> > >> - done
> > >> + install -m 0755
> > >> $demo/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw ||
> > >true
> > >> done
> > >>
> > >> find ${S} -name "*_org" -delete
> > >>
> > >> # Build OGLES2 Trainingcourses
> > >> - for X11BUILD in 0 1 ; do
> > >> - # Don't rebuild training courses with X11 support for
> > >> a non X11 distro
> > >> - if [ ${SUPPORT_XORG} -eq 0 -a $X11BUILD -eq 1 ] ;
> > >> then
> > >> - continue
> > >> + for training in
> > >> ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
> > >> + if [ -e $training/OGLES2/Build/LinuxGeneric/Makefile
> > >> ] ; then
> > >> + cd $training/OGLES2/Build/LinuxGeneric
> > >> fi
> > >>
> > >> - for training in
> > >> ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
> > >> - if [ -e
> > >> $training/OGLES2/Build/LinuxGeneric/Makefile ] ; then
> > >> - cd $training/OGLES2/Build/LinuxGeneric
> > >> - fi
> > >> -
> > >> - if [ -e
> > >> $training/OGLES2/Build/${PLATFORM}/Makefile ] ; then
> > >> - cd $training/OGLES2/Build/${PLATFORM}
> > >> - fi
> > >> + if [ -e $training/OGLES2/Build/${PLATFORM}/Makefile ]
> > >> ; then
> > >> + cd $training/OGLES2/Build/${PLATFORM}
> > >> + fi
> > >>
> > >> - oe_runmake Common=1 PLATFORM=${PLATFORM}
> > >> X11BUILD=$X11BUILD
> > >> - rm -f
> > >> $training/OGLES2/Build/${PLATFORM}/Release*/*.o
> > >> + oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
> > >> + rm -f $training/OGLES2/Build/${PLATFORM}/Release*/*.o
> > >>
> > >> - if [ $X11BUILD -eq 1 ] ; then
> > >> - install -m 0755
> > >> $training/OGLES2/Build/${PLATFORM}/ReleaseX11/*
> > >> ${S}/trainingcourses/x11 || true
> > >> - else
> > >> - install -m 0755
> > >> $training/OGLES2/Build/${PLATFORM}/ReleaseRaw/*
> > >> ${S}/trainingcourses/raw || true
> > >> - fi
> > >> - done
> > >> + install -m 0755
> > >> $training/OGLES2/Build/${PLATFORM}/ReleaseRaw/*
> > >> ${S}/trainingcourses/raw || true
> > >> done
> > >>
> > >> +
> > >> }
> > >>
> > >> do_install () {
> > >> install -d ${D}${libdir}
> > >> cp -pPR ${BINLOCATION}/*.so* ${D}${libdir}
> > >> + rm ${D}${libdir}/libpvrPVR2D_DRIWSEGL.so*
> > >> + rm ${D}${libdir}/libsrv_um_dri.so*
> > >> + rm ${D}${libdir}/pvr_drv.so*
> > >> install -m 0644 ${BINLOCATION}/*.a ${D}${libdir}
> > >>
> > >> install -d ${D}${bindir}/
> > >> @@ -169,12 +130,6 @@ do_install () {
> > >> install -m 0755 ${BINLOCATION}/gl* ${D}${bindir}/
> > >> install -m 0755 ${BINLOCATION}/${PVR_INIT} ${D}${bindir}/
> > >>
> > >> - if [ ${SUPPORT_XORG} -eq 1 ] ; then
> > >> - install -m 0755 ${BINLOCATION}/xgles1test1
> > >> ${D}${bindir}/
> > >> - install -m 0755
> > >> ${BINLOCATION}/freedesktop/kdrive/usr/X11R6_SGX/bin/Xsgx
> > >> ${D}${bindir}/|| true
> > >> - cp -pPR
> > >>
> > >${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/${PLATFORM}/li
> > >> b/*X11WS* ${D}${libdir} || true
> > >> - fi
> > >> -
> > >> install -d ${D}${includedir}
> > >> cp -pPR ${S}/GFX_Linux_KM/include4 ${D}${includedir}/
> > >> cp -pPR ${S}/GFX_Linux_KM/services4 ${D}${includedir}/ @@ -
> > >211,13
> > >> +166,12 @@ do_install () {
> > >>
> > >> shared_prog="eglinfo pvr2d_test ${PVR_INIT} services_test
> > >> sgx_blit_test sgx_clipblit_test sgx_flip_test sgx_init_test
> > >> sgx_render_flip_test"
> > >> raw_prog="gles1test1 gles2test1 ovg_unit_test"
> > >> - x11_prog="eglinfo_x xgles1test1 xgles2test1 xmultiegltest
> > >> xovg_unit_test"
> > >>
> > >> for esrev in 2 3 5 6 8 ; do
> > >> ESLOCATION=$(eval echo $(echo
> > >> \$\{ES${esrev}LOCATION\}))
> > >> if [ -e ${ESLOCATION} ] ; then
> > >> cp -pPR ${ESLOCATION}/lib*${IMGPV}
> > >${ESLOCATION}/pvr_drv.so
> > >> ${ESLOCATION}/*.a ${D}${libdir}/ES${esrev}.0/
> > >> - for esprog in $shared_prog $raw_prog
> > >> ${@base_contains('DISTRO_FEATURES', 'x11',"$x11_prog","",d)} ;
> > >do
> > >> + for esprog in $shared_prog $raw_prog ; do
> > >> install -m 0755 ${ESLOCATION}/$esprog
> > >${D}${bindir}/ES${esrev}.0/
> > >> 2>/dev/null || true
> > >> done
> > >> fi
> > >> @@ -225,17 +179,6 @@ do_install () {
> > >>
> > >> rm ${D}${bindir}/ES*/*.h ${D}${bindir}/ES*/pdsasm
> > >> ${D}${bindir}/pdsasm -f || true
> > >>
> > >> - install -d ${D}${prefix}/share/applications
> > >> - cp ${WORKDIR}/*.desktop ${D}${prefix}/share/applications
> > >> - rm ${D}${prefix}/share/applications/sample.desktop
> > >> -
> > >> - if [ ${SUPPORT_XORG} -eq 1 ] ; then
> > >> - install -d ${D}${bindir}/SGX/demos/X11/
> > >> - install -m 0755 ${S}/demos/x11/*
> > >> ${D}${bindir}/SGX/demos/X11/
> > >> - install -d ${D}${bindir}/SGX/trainingcourses/X11
> > >> 2>/dev/null || true
> > >> - install -m 0755 ${S}/trainingcourses/x11/*
> > >> ${D}${bindir}/SGX/trainingcourses/X11/ 2>/dev/null || true
> > >> - fi
> > >> -
> > >> install -d ${D}${bindir}/SGX/demos/Raw/
> > >> install -m 0755 ${S}/demos/raw/*
> > >> ${D}${bindir}/SGX/demos/Raw/
> > >> install -d ${D}${bindir}/SGX/trainingcourses/Raw
> > >> 2>/dev/null || true
> > >> @@ -251,8 +194,7 @@ do_install () {
> > >>
> > >> }
> > >>
> > >> -PACKAGES =+ "${@base_contains('DISTRO_FEATURES', 'x11',"${PN}-
> > >> x11demos ${PN}-x11trainingcourses xserver-kdrive-powervrsgx"
> > >,"", d)}
> > >> \
> > >> - ${PN}-rawdemos ${PN}-rawtrainingcourses ${PN}-
> > >> tests"
> > >> +PACKAGES =+ "${PN}-rawdemos ${PN}-rawtrainingcourses ${PN}-
> > >> tests"
> > >> # Package the base libraries per silicon revision PACKAGES =+
> > >> "${PN}-es2 ${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8"
> > >> RRECOMMENDS_${PN} += "${PN}-es2 ${PN}-es3 ${PN}-es5 ${PN}-es6
> > >> ${PN}-es8"
> > >> @@ -271,18 +213,14 @@ PRIVATE_LIBS_${PN}-es8 = "libGLESv2.so
> > >> libIMGegl.so libsrv_um.so libOpenVG.so li
> > >>
> > >>
> > >> PACKAGES =+ "${PN}-blitwsegl ${PN}-flipwsegl ${PN}-frontwsegl
> > >> ${PN}-linuxfbwsegl"
> > >> -PACKAGES =+ "${@base_contains('DISTRO_FEATURES', 'x11',"${PN}-
> > >> x11wsegl ${PN}-driwsegl" ,"", d)}"
> > >> +
> > >> FILES_${PN}-blitwsegl = "${libdir}/libpvrPVR2D_BLITWSEGL.so.*"
> > >> FILES_${PN}-flipwsegl = "${libdir}/libpvrPVR2D_FLIPWSEGL.so.*"
> > >> FILES_${PN}-frontwsegl =
> > >"${libdir}/libpvrPVR2D_FRONTWSEGL.so.*"
> > >> FILES_${PN}-linuxfbwsegl =
> > >> "${libdir}/libpvrPVR2D_LINUXFBWSEGL.so.*"
> > >> -FILES_${PN}-x11wsegl = "${libdir}/libpvrPVR2D_X11WSEGL.so*
> > >> ${bindir}/x* ${bindir}/*x"
> > >> -FILES_${PN}-driwsegl = "${libdir}/libpvrPVR2D_DRIWSEGL.so*
> > >> ${libdir}/libsrv_um_dri*"
> > >>
> > >> PACKAGES =+ "${PN}-blitwsegl-es2 ${PN}-blitwsegl-es3 ${PN}-
> > >> blitwsegl-es5 ${PN}-blitwsegl-es6 ${PN}-blitwsegl-es8 ${PN}-
> > >> flipwsegl-es2 ${PN}-flipwsegl-es3 ${PN}-flipwsegl-es5 ${PN}-
> > >> flipwsegl-es6 ${PN}-flipwsegl-es8 ${PN}-frontwsegl-es2 ${PN}-
> > >> frontwsegl-es3 ${PN}-frontwsegl-es5 ${PN}-frontwsegl-es6 ${PN}-
> > >> frontwsegl-es8 ${PN}-linuxfbwsegl-es2 ${PN}-linuxfbwsegl-es3
> > >> ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6 ${PN}-
> > >linuxfbwsegl- es8"
> > >>
> > >> -X11_SEGL = " ${PN}-x11wsegl-es2 ${PN}-x11wsegl-es3 ${PN}-
> > >> x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-x11wsegl-es8 ${PN}-
> > >> driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-
> > >> driwsegl-es6 ${PN}-driwsegl-es8 "
> > >> -PACKAGES =+ "${@base_contains('DISTRO_FEATURES',
> > >> 'x11',"${X11_SEGL}" ,"", d)}"
> > >> FILES_${PN}-blitwsegl-es2 =
> > >> "${libdir}/ES2*/libpvrPVR2D_BLITWSEGL.so.*"
> > >> FILES_${PN}-blitwsegl-es3 =
> > >> "${libdir}/ES3*/libpvrPVR2D_BLITWSEGL.so.*"
> > >> FILES_${PN}-blitwsegl-es5 =
> > >> "${libdir}/ES5*/libpvrPVR2D_BLITWSEGL.so.*"
> > >> @@ -311,25 +249,10 @@ FILES_${PN}-linuxfbwsegl-es6 =
> > >> "${libdir}/ES6*/libpvrPVR2D_LINUXFBWSEGL.so.*"
> > >> FILES_${PN}-linuxfbwsegl-es8 =
> > >> "${libdir}/ES8*/libpvrPVR2D_LINUXFBWSEGL.so.*"
> > >> RRECOMMENDS_${PN}-linuxfbwsegl = " ${PN}-linuxfbwsegl-es2
> > >${PN}-
> > >> linuxfbwsegl-es3 ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6
> > >> ${PN}-linuxfbwsegl-es8"
> > >>
> > >> -FILES_${PN}-x11wsegl-es2 =
> > >> "${libdir}/ES2*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES2*/x*
> > >> ${bindir}/ES2*/*x"
> > >> -FILES_${PN}-x11wsegl-es3 =
> > >> "${libdir}/ES3*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES3*/x*
> > >> ${bindir}/ES3*/*x"
> > >> -FILES_${PN}-x11wsegl-es5 =
> > >> "${libdir}/ES5*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES5*/x*
> > >> ${bindir}/ES5*/*x"
> > >> -FILES_${PN}-x11wsegl-es6 =
> > >> "${libdir}/ES6*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES6*/x*
> > >> ${bindir}/ES6*/*x"
> > >> -FILES_${PN}-x11wsegl-es8 =
> > >> "${libdir}/ES8*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES8*/x*
> > >> ${bindir}/ES8*/*x"
> > >> -RRECOMMENDS_${PN}-x11wsegl = " ${PN}-x11wsegl-es2 ${PN}-
> > >> x11wsegl-es3 ${PN}-x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-
> > >> x11wsegl-es8"
> > >> -
> > >> -FILES_${PN}-driwsegl-es2 =
> > >> "${libdir}/ES2*/libpvrPVR2D_DRIWSEGL.so.*
> > >> ${libdir}/ES2*/libsrv_um_dri*"
> > >> -FILES_${PN}-driwsegl-es3 =
> > >> "${libdir}/ES3*/libpvrPVR2D_DRIWSEGL.so.*
> > >> ${libdir}/ES3*/libsrv_um_dri*"
> > >> -FILES_${PN}-driwsegl-es5 =
> > >> "${libdir}/ES5*/libpvrPVR2D_DRIWSEGL.so.*
> > >> ${libdir}/ES5*/libsrv_um_dri*"
> > >> -FILES_${PN}-driwsegl-es6 =
> > >> "${libdir}/ES6*/libpvrPVR2D_DRIWSEGL.so.*
> > >> ${libdir}/ES6*/libsrv_um_dri*"
> > >> -FILES_${PN}-driwsegl-es8 =
> > >> "${libdir}/ES8*/libpvrPVR2D_DRIWSEGL.so.*
> > >> ${libdir}/ES8*/libsrv_um_dri*"
> > >> -RRECOMMENDS_${PN}-driwsegl = " ${PN}-driwsegl-es2 ${PN}-
> > >> driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-driwsegl-es6 ${PN}-
> > >> driwsegl-es8"
> > >> -
> > >> CONFFILES_${PN} = "${sysconfdir}/powervr.ini"
> > >>
> > >> FILES_${PN} = "${sysconfdir} ${libdir}/*.so*
> > >${bindir}/${PVR_INIT}
> > >> ${bindir}/cputype ${bindir}/*"
> > >>
> > >> -FILES_xserver-kdrive-powervrsgx = "${bindir}/Xsgx"
> > >> FILES_${PN}-tests = "${bindir}/*test*"
> > >> FILES_${PN}-dbg = "${libdir}/.debug/* ${bindir}/.debug/* \
> > >> ${libdir}/ES*/.debug ${bindir}/*/.debug\ @@
> > >> -338,12 +261,8 @@ FILES_${PN}-dbg = "${libdir}/.debug/*
> > >> ${bindir}/.debug/* \
> > >> "
> > >>
> > >> FILES_${PN}-rawdemos = "${bindir}/SGX/demos/Raw/*"
> > >> -FILES_${PN}-x11demos = "${bindir}/SGX/demos/X11/*
> > >> ${prefix}/share/applications "
> > >> -RRECOMMENDS_${PN}-x11demos = "${PN}-x11wsegl"
> > >>
> > >> FILES_${PN}-rawtrainingcourses =
> > >> "${bindir}/SGX/trainingcourses/Raw/*"
> > >> -FILES_${PN}-x11trainingcourses =
> > >> "${bindir}/SGX/trainingcourses/X11/*"
> > >> -RRECOMMENDS_${PN}-x11trainingcourses = "${PN}-x11wsegl"
> > >>
> > >> # The libs need the kernel-modules
> > >> RRECOMMENDS_${PN} += "omap3-sgx-modules"
> > >> @@ -358,7 +277,6 @@ INSANE_SKIP_${PN}-es5 = "ldflags dev-so
> > >staticdev"
> > >> INSANE_SKIP_${PN}-es6 = "ldflags dev-so staticdev"
> > >> INSANE_SKIP_${PN}-es8 = "ldflags dev-so staticdev"
> > >> INSANE_SKIP_${PN}-rawdemos = "ldflags dev-so useless-rpaths"
> > >> -INSANE_SKIP_${PN}-x11demos = "ldflags dev-so useless-rpaths"
> > >> INSANE_SKIP_${PN}-blitwsegl = "ldflags"
> > >> INSANE_SKIP_${PN}-blitwsegl-es3 = "ldflags"
> > >> INSANE_SKIP_${PN}-blitwsegl-es5 = "ldflags"
> > >> @@ -379,18 +297,7 @@ INSANE_SKIP_${PN}-linuxfbwsegl-es3 =
> > >"ldflags"
> > >> INSANE_SKIP_${PN}-linuxfbwsegl-es5 = "ldflags"
> > >> INSANE_SKIP_${PN}-linuxfbwsegl-es6 = "ldflags"
> > >> INSANE_SKIP_${PN}-linuxfbwsegl-es8 = "ldflags"
> > >> -INSANE_SKIP_${PN}-x11wsegl = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-x11wsegl-es3 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-x11wsegl-es5 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-x11wsegl-es6 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-x11wsegl-es8 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-driwsegl = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-driwsegl-es3 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-driwsegl-es5 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-driwsegl-es6 = "ldflags dev-so"
> > >> -INSANE_SKIP_${PN}-driwsegl-es8 = "ldflags dev-so"
> > >> INSANE_SKIP_${PN}-tests = "ldflags"
> > >> -INSANE_SKIP_xserver-kdrive-powervrsgx = "ldflags"
> > >>
> > >> # Quality control is really poor on these SDKs, so hack around
> > >the
> > >> latest madness:
> > >> FILES_${PN} += "${libdir}/*.so "
> > >> @@ -404,12 +311,6 @@ INITSCRIPT_PARAMS = "start 30 5 2 . stop 40
> > >> 0 1 6 ."
> > >> # Append to update-rc.d postinst
> > >> pkg_postinst_${PN}_append() {
> > >> rm -f $D${sysconfdir}/powervr-esrev
> > >> -
> > >> -if [ ${SUPPORT_XORG} -eq 1 ] ; then
> > >> - ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
> > >> - ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
> > >> -fi
> > >> -
> > >> }
> > >>
> > >> pkg_postinst_${PN}-blitwsegl() {
> > >> @@ -427,14 +328,3 @@ pkg_postinst_${PN}-linuxfbwsegl() { rm -f
> > >> $D${sysconfdir}/powervr-esrev }
> > >>
> > >> -pkg_postinst_${PN}-x11wsegl() {
> > >> -rm -f $D${sysconfdir}/powervr-esrev
> > >> -
> > >> -echo "[default]" > $D${sysconfdir}/powervr.ini -echo
> > >> "WindowSystem=libpvrPVR2D_X11WSEGL.so.1" >>
> > >> $D${sysconfdir}/powervr.ini -}
> > >> -
> > >> -pkg_postinst_${PN}-driwsegl() {
> > >> -rm -f $D${sysconfdir}/powervr-esrev
> > >> -}
> > >> -
> > >> diff --git a/recipes-graphics/libgles/libgles-
> > >omap3_4.09.00.01.bb
> > >> b/recipes-graphics/libgles/libgles-omap3_4.09.00.01.bb
> > >> index 7c6f231..165a406 100644
> > >> --- a/recipes-graphics/libgles/libgles-omap3_4.09.00.01.bb
> > >> +++ b/recipes-graphics/libgles/libgles-omap3_4.09.00.01.bb
> > >> @@ -23,8 +23,6 @@ TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
> > >> SRC_URI = "http://software-
> > >>
> > >dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV
> > >> }/exports/${BINFILE} \
> > >> file://cputype \
> > >> file://rc.pvr \
> > >> - file://rc_dri.pvr \
> > >> - file://sample.desktop \
> > >> file://99-bufferclass.rules \ "
> > >> SRC_URI[md5sum] = "bd35e9d8843aff3a2aca9d41e7db1c7d"
> > >> @@ -32,44 +30,5 @@ SRC_URI[sha256sum] =
> > >> "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249
> > >>
> > >> S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
> > >>
> > >> -LIBGLESWINDOWSYSTEM ?= "${@base_contains('DISTRO_FEATURES',
> > >> 'x11',"libpvrPVR2D_DRIWSEGL.so" ,"libpvrPVR2D_FRONTWSEGL.so.1",
> > >d)}"
> > >> +LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"
> > >>
> > >> -do_configure_append() {
> > >> -
> > >> - # Change PVR server's user mode library to point to DRI
> > >> - for drifile in $(find ${S} -name "libsrv_um_dri.so"); do
> > >> - if [ "$drifile" != "" ]
> > >> - then
> > >> - dir=$(dirname ${drifile})
> > >> - if [ "$SUPPORT_XORG" = "1" ]
> > >> - then
> > >> - mv ${dir}/libsrv_um_dri.so ${dir}/libsrv_um.so
> > >> - else
> > >> - rm -rf ${dir}/libsrv_um_dri.so
> > >> - fi
> > >> - fi
> > >> -
> > >> - done
> > >> -}
> > >> -
> > >> -do_install_append() {
> > >> -
> > >> - # In this version of the graphics SDK the following
> > >> directories do not exist:
> > >> - #
> > >> /GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/pvr2d.h
> > >> (doesn't exist)
> > >> - #
> > >>
> > >/GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/GLES/egltype
> > >> s.h (doesn't exist)
> > >> - # Therefore, need to copy these files manually at the only
> > >> location that they do exist
> > >> - cp -pPr ${S}/include/pvr2d/*.h ${D}${includedir}
> > >> - cp -pPr ${S}/include/OGLES/GLES ${D}${includedir}/
> > >> -
> > >> - rm ${D}${sysconfdir}/init.d/pvr-init
> > >> -
> > >> - if [ "$SUPPORT_XORG" = "1" ]; then
> > >> - cp -pP ${WORKDIR}/rc_dri.pvr
> > >> ${D}${sysconfdir}/init.d/pvr-init
> > >> - else
> > >> - cp -pP ${WORKDIR}/rc.pvr ${D}${sysconfdir}/init.d/pvr-
> > >> init
> > >> - fi
> > >> -
> > >> -}
> > >> -
> > >> -RRECOMMENDS_${PN}-x11demos = "${PN}-driwsegl"
> > >> -RRECOMMENDS_${PN}-x11trainingcourses = "${PN}-driwsegl"
> > >> --
> > >> 1.7.1
> > >>
> > >> _______________________________________________
> > >> meta-ti mailing list
> > >> meta-ti at yoctoproject.org
> > >> https://lists.yoctoproject.org/listinfo/meta-ti
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
> >
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
_______________________________________________
meta-ti mailing list
meta-ti at yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-ti
More information about the meta-ti
mailing list