[meta-ti] meat-ti(master) kernel not working with meta-ivi

[Baptiste Durand]

Hi,

I already saw this issue (=> https://github.com/baillaw/meta-x10/issues) :
please  try to add
GCCVERSION="4.7%" in  your local.conf.

GCC 4.8 seems to build uncorrectly the kernel for pandaboard.



Baptiste



2013/11/6 Heroor, Siddharth <heroor at ti.com>

>  Hi Jithin,
>
>  Please comments below.
>
> --Sid
>
> On 06-Nov-2013, at 5:33 pm, "Jithin Raj" <jithin.raj at nestgroup.net> wrote:
>
>   Hi,
>
>
>
> I am trying to build the yocto based meta-ivi (5.0), meta-ti for
> Pandaboard.
>
> For building  I used the below procedure
>
>
>
> 1) git clone git://git.yoctoproject.org/poky
>
>    cd poky
>
>    git checkout dora
>
>    cd -
>
> 2) git clone git://git.yoctoproject.org/meta-ivi
>
>    cd meta-ivi
>
>    git checkout 5.0
>
>    cd -
>
> 3) git clone git://git.yoctoproject.org/meta-ti
>
>
>
> 4) source poky/oe-init-build-env
>
>
>
> 5) modified the bblayer.conf like this.
>
>     BBLAYERS ?= " \
>
>      /home/sfm/yocto/building/poky/meta \
>
>      /home/sfm/yocto/building/poky/meta-yocto \
>
>      /home/sfm/yocto/building/meta-ivi \
>
>      /home/sfm/yocto/building/meta-ti \
>
>
>
> 6) modified the local.config with
>
>                 MACHINE?=pandaboard
>
>
>
> 7) Add INCOMPATIBLE_LICENSE = "GPLv3" in COREBASE/build/conf/local.conf
> file.
>
>
>
> 8) Set DISTRO ?= "poky-ivi-systemd" in COREBASE/build/conf/local.conf file.
>
>
>
> 9) bitbake gemini-image
>
>
>
> Once all the generated files are copied to the SD card I switched on the
> pandaboard es.
>
> The pandaboard es is hanging while its loading the kernel. Please find log
> here:
>
>
>  Please also see if core-minimal and sato images are booting. There isn't
> much active work happening on panda board and so could you check if a
> kernel.org is booting fine?
>
>
>
>
> *U-Boot SPL 2011.12 (Nov 05 2013 - 14:12:29)*
>
> *Texas Instruments OMAP4460 ES1.1        *
>
> *OMAP SD/MMC: 0                          *
>
> *reading u-boot.img                      *
>
> *reading u-boot.img*
>
>
>
>
>
> *U-Boot 2011.12 (Nov 05 2013 - 14:12:29)*
>
>
>
> *CPU  : OMAP4460 ES1.1*
>
> *Board: OMAP4 Panda*
>
> *I2C:   ready*
>
> *DRAM:  1 GiB*
>
> *MMC:   OMAP SD/MMC: 0*
>
> *Using default environment*
>
>
>
> *In:    serial*
>
> *Out:   serial*
>
> *Err:   serial*
>
> *Hit any key to stop autoboot:  0 *
>
> *reading boot.scr*
>
>
>
> *338 bytes read*
>
> *Running bootscript from mmc0 ...*
>
> *## Executing script at 82000000*
>
> *reading uImage*
>
>
>
> *4333848 bytes read*
>
> *## Booting kernel from Legacy Image at 80000000 ...*
>
> *   Image Name:   Linux-3.4.11*
>
> *   Image Type:   ARM Linux Kernel Image (uncompressed)*
>
> *   Data Size:    4333784 Bytes = 4.1 MiB*
>
> *   Load Address: 80008000*
>
> *   Entry Point:  80008000*
>
> *   Verifying Checksum ... OK*
>
> *   Loading Kernel Image ... OK*
>
> *OK*
>
>
>
> *Starting kernel ...*
>
>
>
> *Uncompressing Linux... done, booting the kernel.*
>
>
>
> After this nothing is displayed.
>
>
>
> I have few doubts in this procedure.
>
>
>
> 1)      *which branch of meta-ti I have to use for dora branch*?
> (currently am using the master branch).
>
>
>  Master should be fine for Dora. Please also checkout the specific
> commits from poky as mentioned in meta-ivi.
>
>   2)      *Do the master branch will work with all the poky branches*(like dora, dylan?
>
>
>  There should be Dylan branch on meta-ti that you can checkout.
>
>           3)    *Do I need to do any other modification in any file to
> work with pandaboard*?.
>
>
>  I haven't tried panda recently but I could try it out early next week
> and respond.
>
>
>
> Thanks in advance.
>
>
>
> *Thanks & regards*
>
> *Jithin Raj*
>
>
>
> ***** Confidentiality Statement/Disclaimer *****
>
> This message and any attachments is intended for the sole use of the
> intended recipient. It may contain confidential information. Any
> unauthorized use, dissemination or modification is strictly prohibited. If
> you are not the intended recipient, please notify the sender immediately
> then delete it from all your systems, and do not copy, use or print.
> Internet communications are not secure and it is the responsibility of the
> recipient to make sure that it is virus/malicious code exempt.
> The company/sender cannot be responsible for any unauthorized alterations
> or modifications made to the contents. If you require any form of
> confirmation of the contents, please contact the company/sender. The
> company/sender is not liable for any errors or omissions in the content of
> this message.
>
>  _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
>
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
>


-- 
Baptiste DURAND
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20131106/0069a80d/attachment.html>