[meta-ti] BBB + uboot 2014.07 - not booting

[Diego Sueiro]

Maciej,

On Tue, Aug 19, 2014 at 6:29 AM, Maciej Borzecki <
maciej.borzecki at open-rnd.pl> wrote:

> Hi all,
>
> There seems to be a problem booting BBB from SD card with uboot 2014.07
> from
> meta-ti, 2013.07 from yocto seems to work.
> The card is partitioned as follows:
>
> Device         Boot     Start       End Blocks  Id System
> /dev/mmcblk0p1 *         2048     22527 10240   c W95 FAT32 (LBA)
> /dev/mmcblk0p2          22528    227327 102400  83 Linux
>
> I've already tried different cards.
>
> This is all I get on the serial console:
>
> U-Boot SPL 2014.07 (Aug 19 2014 - 10:45:01)
> MMC: block number 0x100 exceeds max(0x0)
> MMC: block number 0x200 exceeds max(0x0)
> *** Error - No Valid Environment Area found
> Using default environment
>
> MMC: block number 0x1 exceeds max(0x0)
> ** Can't read partition table on 0:0 **
> ** Partition 1 not valid on device 0 **
> spl_register_fat_device: fat register err - -1
> ### ERROR ### Please RESET the board ###
>
> --
>

I don't have this issue on SD card, bug I'm facing with another error when
MLO is installed on eMMC. This is my error message:

U-Boot SPL 2014.07 (Aug 13 2014 - 08:23:53)
omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
spl: mmc init failed: err - -19
### ERROR ### Please RESET the board ###

Anyone have tested the MLO on eMMC?


Regards,

--
*dS
Diego Sueiro

Administrador do Embarcados
www.embarcados.com.br
<http://www.embarcados.com.br/?utm_source=assinatura_diego&utm_medium=e-mail&utm_campaign=Assinatura%20Email%20Diego>

/*long live rock 'n roll*/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20140819/ad5b6e49/attachment.html>