[meta-ti] mis-definition of SLEWCTRL_FAST in dt-bindings amxxxx header

[Peter A. Bigot]

Depends what "upstream" means.  It's not in 3.17 released 05 Oct, nor in 
any other non-TI repository I can find.  (Might be hidden in a TI 
repository somewhere that I'm not looking.)

Peter

On 10/07/2014 03:58 PM, Denys Dmytriyenko wrote:
> Wasn't this already fixed upstream?
>
> On Wed, Sep 17, 2014 at 07:17:03AM -0500, Peter A. Bigot wrote:
>> Any comment on this?  I have a patch, but figured it'd be better for
>> TI to provide an official solution.  Or is there another forum it
>> should be raised in?
>>
>> It's really misleading for the self-documenting device tree
>> specifications to lie about what sort of slew is being configured.
>>
>> Peter
>>
>> On 09/06/2014 06:17 PM, Peter A. Bigot wrote:
>>> While converting some old DTS bindings, I noticed that the Linux
>>> include/dt-bindings/pinctrl/am33xx.h and am43xx.h headers both
>>> define SLEWCTRL_FAST constants:
>>>
>>> include/dt-bindings/pinctrl/am33xx.h:#define SLEWCTRL_FAST
>>> (1 << 6)
>>> include/dt-bindings/pinctrl/am43xx.h:#define SLEWCTRL_FAST
>>> (1 << 19)
>>>
>>> According to the TRM for these processors, the effect of setting
>>> that bit is to select slow slew; fast would be selected by leaving
>>> it cleared.  The constants should therefore be named
>>> SLEWCTRL_SLOW.
>>>
>>> This is consistent with the value for the I2C binding constants
>>> I'm converting:
>>>
>>> beagleboard/3.14:arch/arm/boot/dts/am335x-bone-common-pinmux.dtsi:
>>> 0x158 0x72      /* spi0_d1.i2c1_sda, SLEWCTRL_SLOW | INPUT_PULLUP
>>> | MODE2 */
>>> beagleboard/3.14:arch/arm/boot/dts/am335x-bone-common-pinmux.dtsi:
>>> 0x15c 0x72      /* spi0_cs0.i2c1_scl, SLEWCTRL_SLOW | INPUT_PULLUP
>>> | MODE2 */
>>>
>>> except that in the official files we have something like:
>>>
>>> stable/linux-3.14.y:arch/arm/boot/dts/am43x-epos-evm.dts: 0x188
>>> (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /*
>>> i2c0_sda.i2c0_sda */
>>> stable/linux-3.14.y:arch/arm/boot/dts/am43x-epos-evm.dts: 0x18c
>>> (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /*
>>> i2c0_scl.i2c0_scl */
>>>
>>> which is either wrong or misleading.
>>>
>>> Peter
>> -- 
>> _______________________________________________
>> meta-ti mailing list
>> meta-ti at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-ti
>>