[meta-ti] No USB on BeagleBone White

[Gary Thomas]

On 2015-04-08 09:33, Denys Dmytriyenko wrote:
> On Wed, Apr 08, 2015 at 09:25:25AM -0600, Gary Thomas wrote:
>> I need to resurrect my old BeagleBone White and I'm trying to
>> do it using Poky/Yocto + meta-ti.  I've managed to build and
>> boot my board, but it detects nothing when something is plugged
>> into the USB [not OTG/serial-port] port.
>>
>> Any ideas what I need to do to get this going?  The board is
>> pretty useless to me without the extra USB.
>
> Which kernel recipe do you use?
>

I used the default from meta-ti/master
   linux-ti-staging/3.14.35-r22e+gitrAUTOINC+b60f54ead7

I also had an old image left around from last June which was a 3.12.20
kernel which has the same behaviour.

I've tried this on both a BeagleBone Black and White (I have
one of each side-by-side on my desk) and USB does not work
on either.

Is there some configuration I'm missing or something?

Note: I'm building using the simple layer setup I have at
   https://github.com/GaryThomas/meta-bbb.git
Look at
   https://github.com/GaryThomas/meta-bbb/blob/using-meta-ti/NOTES

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------