[meta-ti] Fido doesn't boot on OMAP5 EVM, and HDMI errors for BB X15

[Robert Nelson]

On Thu, Dec 17, 2015 at 7:19 PM, Aymeric Dumaz <aymeric.dumaz at gmail.com> wrote:
> Hello,
>
> I tried to build a Fido core-image-minimal for the OMAP5 EVM and BB X15.
>
> On the OMAP5432 uEVM, nothing happens after "Starting kernel", there
> is no log and the HDMI screen doesn't show the Arago prompt.
> Adding the earlyprintk option doesn't change anything, but the board
> was booting correctly with a Daisy image.
>
> On the Beagleboard X15, I see some errors regarding the HDMI during
> the boot process; "modprobe omapdrm_pvr" works but "pvrsrvinit"
> doesn't.
> There are also errors about firmwares not loaded (dra7-ipu1-fw.xem4,
> dra7-dsp1-fw.xe66), I presume they come from the ipumm-fw recipe but
> I'm not sure if it is related.
> Also, my board is a rev. A1a, I had to patch u-boot to get the UART,
> so I won't be surprised if my board is not supported anymore.
> Here is the log: http://pastebin.com/E6WyA64P

The A1a is not supported anymore, that's why HDMI doesn't work (ldo
was moved due to power demand..).  Talk to who ever gave you the board
and get an A2..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/