[meta-ti] Problem to write core-image-minimal of AM437x-evm on SD card

[winiston at futuraautomation.com]

Dear,

Sorry...I am new to yocto project.I could not get "wic". How do I setup wic 
and "dd" it into sd card. I did not get angstrom script also. where can I 
get angstrom script ?  can you give the detailed procedure? Is there any 
related documentation available in yocto website?
Now I used "fdisk" command to format sdcard. I am able to copy MLO & 
u-image.img to BOOT partition. I extracted rootfs to secondary partition 
using"Ark" software.  But in the secondary partition, the files are not 
visible. In properties window, it shows the number of files and size of the 
files. I used that sd card to boot my am437x evm kit. It is not booting. 
What could be the error? Kindly give me the detailed procedure to copy the 
image. What are the files I need to copy for core-image-minimal kernel?
Note: I am using core-image-minimal

Regards,
Winiston.P
Futura Automation Pvt Ltd.

Ph :91-80-28375290 / 28375295
Fax :91-80-28375291
-----Original Message----- 
From: Khem Raj
Sent: Monday, February 01, 2016 10:52 AM
To: winiston at futuraautomation.com
Cc: yocto texas
Subject: Re: [meta-ti] Problem to write core-image-minimal of AM437x-evm on 
SD card

On Sun, Jan 31, 2016 at 8:19 PM,  <winiston at futuraautomation.com> wrote:
> Dear,
>
> I have successfully built core-minimal image of AM437x-evm using poky. The
> following files have been created under /tmp/deploy/images/am437x-evm
> directory.
>
> core-image-minimal-am437x-evm.tar.bz2
> core-image-minimal-am437x-evm.tar.gz
> core-image-minimal-am437x-evm-20160127052452.rootfs.tar.gz
> MLO
> MLO-am437x-evm
> u-boot.img
> u-boot-am437x-evm.img
> zImage
> zImage--4.1.15+git0+b7b07f10f6-r3f-am43x-epos-evm-20160127052452.dtb
>
> and many more files have been created. I wanted to write it on the sd 
> card.
> How do I copy the images to sd card? I did not find any command to write 
> the
> image. Kindly help me out to write the image on sd card. I could not go
> further to develop my project. I would be very thankful if you give me
> detail procedure to solve this issue.

you can use wic to generate sdcard image and then dd it into SD card
secondly you can use angstrom sdcard scripts to create your SD card 
partitions
and then copy MLO, uboot to boot partition and untar rootfs into
second partion manually

>
> Awaiting your valuable reply. Thanking you.
>
>
> Regards,
> Winiston.P
> Futura Automation Pvt Ltd.
>
> Ph :91-80-28375290 / 28375295
> Fax :91-80-28375291
>
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>