[meta-ti] [EXTERNAL] [PATCH v3 1/7] pm-lld-rtos: Adding rtos recipe for pm-lld

[Jacob Stiffler]

On 8/30/2017 6:42 PM, Mahesh Radhakrishnan wrote:
> Upstreaming TI RTOS low level driver for Power Management module (PM)
> Signed-off-by: Mahesh Radhakrishnan <m-radhakrishnan2 at ti.com>
> ---
>
>   v3 - Removed the intermediate tar-untar for install
>   v2 - Added summary & merged in to a single recipe
>
>   recipes-bsp/pm-lld/pm-lld-rtos_git.bb | 89 +++++++++++++++++++++++++++++++++++
>   1 file changed, 89 insertions(+)
>   create mode 100644 recipes-bsp/pm-lld/pm-lld-rtos_git.bb
>
> diff --git a/recipes-bsp/pm-lld/pm-lld-rtos_git.bb b/recipes-bsp/pm-lld/pm-lld-rtos_git.bb
> new file mode 100644
> index 0000000..72166b0
> --- /dev/null
> +++ b/recipes-bsp/pm-lld/pm-lld-rtos_git.bb
> @@ -0,0 +1,89 @@
> +SUMMARY = "TI RTOS driver for Power Management module (PM)"
> +
> +require recipes-ti/includes/ti-paths.inc
> +
> +LICENSE = "BSD-3-Clause"
> +LIC_FILES_CHKSUM = "file://Power.h;beginline=1;endline=31;md5=527b91fdcd26cd19ac07a754f45dedbe"
> +
> +COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g"
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
> +
> +
> +PM_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/pm-lld.git"
> +PM_LLD_GIT_PROTOCOL = "git"
> +PM_LLD_GIT_BRANCH = "int_pm_am335x"
> +PM_LLD_GIT_BRANCH_dra7xx-evm = "master"
> +PM_LLD_GIT_DESTSUFFIX = "git/ti/drv/pm"
> +
> +# Below commit ID corresponds to "DEV.PM_LLD.01.04.00.01"
> +PM_LLD_SRCREV = "c4908f94b3e655e6298aa9bfe9bbffbbc5d16111"
> +
> +# Below commit ID corresponds to "REL.PDK.TDA.01.07.00.06"
> +PM_LLD_SRCREV_dra7xx-evm = "46ea13503d2991f636197edb206a9f62cea398d4"
> +
> +BRANCH = "${PM_LLD_GIT_BRANCH}"
> +SRC_URI = "${PM_LLD_GIT_URI};destsuffix=${PM_LLD_GIT_DESTSUFFIX};protocol=${PM_LLD_GIT_PROTOCOL};branch=${BRANCH}"
> +
> +SRCREV = "${PM_LLD_SRCREV}"
> +PV = "01.04.00.01"
> +PR = "r0"
> +
> +S = "${WORKDIR}/${PM_LLD_GIT_DESTSUFFIX}"
> +
> +DEPENDS = " ti-sysbios \
> +            gcc-arm-none-eabi-native \
> +            osal-rtos \
> +            ca-certificates-native \
> +"
> +DEPENDS_append_omap-a15 = " ti-cgt-arm-native \
> +                            ti-cgt6x-native \
> +                            common-csl-ip-rtos \
> +"
> +DEPENDS_append_ti33x = " starterware-rtos \
> +"
> +DEPENDS_append_ti43x = " starterware-rtos \
> +"
> +DEPENDS_append_k2g = " common-csl-ip-rtos \
> +                       ti-cgt6x-native \
> +"
> +
> +# Fetch task cannot be completed until after ca-certificates-native populates sysroot with the SSL certificates
> +do_fetch[depends] = "ca-certificates-native:do_populate_sysroot"

I dont think this is needed.

> +
> +export TOOLCHAIN_PATH_A15 = "${GCC_ARM_NONE_TOOLCHAIN}"
> +export TOOLCHAIN_PATH_A8 = "${GCC_ARM_NONE_TOOLCHAIN}"
> +export TOOLCHAIN_PATH_A9 = "${GCC_ARM_NONE_TOOLCHAIN}"
> +export FPULIB_PATH = "${GCC_ARM_NONE_TOOLCHAIN}/lib/gcc/arm-none-eabi/4.9.3/fpu/"
> +export TOOLCHAIN_PATH_M4 = "${M4_TOOLCHAIN_INSTALL_DIR}"
> +export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
> +export PDK_INSTALL_PATH = "${PDK_INSTALL_DIR}/packages"
> +export BIOS_INSTALL_PATH = "${SYSBIOS_INSTALL_DIR}"
> +export XDC_INSTALL_PATH = "${XDC_INSTALL_DIR}"
> +
> +export PDK_PM_ROOT_PATH = "${WORKDIR}/git"
> +
> +# Used by DEST_ROOT to redirect binary and obj files away from sysroot PDK tree
> +OBJ_DIR = "${WORKDIR}/git/ti/binary"
> +
> +do_compile() {
> +    make clean lib xdc_meta doxygen LIMIT_SOCS="${TI_PDK_LIMIT_SOCS}" LIMIT_BOARDS="${TI_PDK_LIMIT_BOARDS}" DEST_ROOT=${OBJ_DIR}

Could you use oe_runmake instead of directly calling make? And also pass 
LIMIT_SOCS, LIMIT_BOARDS, and DEST_ROOT in EXTRA_OEMAKE.

Without this there could be an issue in the do_configure stage when 
there is an attempt to clean the sources.

> +
> +    # Remove unnecessary files from packaging
> +    rm -rf patches/
> +
> +    # Cleanup docs
> +    rm -rf docs/ReleaseNotes_PM_LLD.doc
> +    rm -rf internal/
> +
> +    #  Clean up .tar files from the package
> +    find -name "*.tar" -exec rm -f {} \;
> +}
> +
> +do_install() {
> +    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/pm
> +    cp -r ${S}/*  ${D}${PDK_INSTALL_DIR_RECIPE}/packages/ti/drv/pm
> +}
> +
> +FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"
> +
> +INSANE_SKIP_${PN} = "arch staticdev"