[meta-ti] [PATCH] dra7xx-evm.conf: removing am57xx SOCS from PDK
Denys Dmytriyenko
denys at ti.com
Thu Jan 25 11:15:23 PST 2018
Jake?
On Wed, Jan 24, 2018 at 08:16:51AM -0500, Molfetta, Stephen wrote:
> Yes, please merge into morty.
>
> Agreed on where PDK SOCs ought to be set, but I'm not sure whether this
> will break am57xx builds right now and will let Jake comment further.
>
> Thanks,
> Stephen
>
> -----Original Message-----
> From: Dmytriyenko, Denys
> Sent: Tuesday, January 23, 2018 4:16 PM
> To: Molfetta, Stephen; Stiffler, Jacob
> Cc: meta-ti at yoctoproject.org
> Subject: Re: [meta-ti] [PATCH] dra7xx-evm.conf: removing am57xx SOCS from
> PDK
>
> I assume, you want this merged into morty too, correct?
>
> This change is fine with me, but I'd go even further and move setting
> initial TI_PDK_LIMIT_SOCS from omap-a15.inc into am57xx-evm.conf
>
> Jake,
>
> Do you have any comments?
>
> On Mon, Jan 22, 2018 at 02:15:48PM -0600, Stephen Molfetta wrote:
> > opencl-monitor does not distinguish between dra7xx and am57xx devices,
> > treating both as the same and attempting to build for am57xx regardless.
> > However, this is dependent on common-csl-ip-rtos, a component of PDK,
> > which in general does handle these devices differently. The definition
> > of am57xx SOCs in the PDK list from omap-15.conf gets inherited by
> > dra7xx-evm.conf, thereby creating a rule that all dra7xx PDK recipes
> > must build am57xx libraries. This results in a dra7xx image which is
> > much larger than necessary, and more severely, creates an artifical
> > dependency link between these two devices and introduces build failures
> > for various PDK recipes.
> >
> > Instead, we now override the PDK SOC definition in dra7xx-evm.conf, and
> > only in the CSL RTOS recipe do we append the am57xx SOCS for dra7xx-evm
> > machine build. This allows for opencl-monitor to build successfully for
> > dra7xx while preventing any other PDK recipes from attempting to build
> > libraries for am57xx devices.
> >
> > This is a workaround that must stay in place until opencl build can
> > properly comprehend am57xx and dra7xx independently, and/or omap-a15
> > is not implied to be synonymous with am57xx in various recipes.
> >
> > Signed-off-by: Stephen Molfetta <sjmolfetta at ti.com>
> > ---
> > conf/machine/dra7xx-evm.conf | 2 +-
> > recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb | 5 ++++-
> > 2 files changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/conf/machine/dra7xx-evm.conf b/conf/machine/dra7xx-evm.conf
> > index 91afd85..7db9ff6 100644
> > --- a/conf/machine/dra7xx-evm.conf
> > +++ b/conf/machine/dra7xx-evm.conf
> > @@ -40,4 +40,4 @@ UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
> >
> > # Set the list of device targets for ti-pdk class recipes
> > TI_PDK_LIMIT_BOARDS = "evmDRA72x evmDRA75x evmDRA78x"
> > -TI_PDK_LIMIT_SOCS_append = " dra72x dra75x dra78x"
> > +TI_PDK_LIMIT_SOCS = "dra72x dra75x dra78x"
> > diff --git a/recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb
> b/recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb
> > index f4496b9..100d2f4 100644
> > --- a/recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb
> > +++ b/recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb
> > @@ -1,5 +1,5 @@
> > require common-csl-ip.inc
> > -PR = "${INC_PR}.5"
> > +PR = "${INC_PR}.6"
> >
> > PACKAGE_ARCH = "${MACHINE_ARCH}"
> > COMPATIBLE_MACHINE_append = "|c66x"
> > @@ -16,3 +16,6 @@ export DEST_ROOT="${S}"
> >
> > # HTML doc link params
> > PDK_COMP_LINK_TEXT = "CSL-Chip Support Library"
> > +
> > +# Workaround: dra7xx build requires am57xx CSL libraries for
> opencl-monitor
> > +TI_PDK_LIMIT_SOCS_append_dra7xx = " am571x am572x"
> > --
> > 2.7.4
> >
> > --
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
More information about the meta-ti
mailing list