[meta-xilinx] MicroBlaze toolchain warping script

Tue Apr 2 21:42:00 PDT 2013

> -----Original Message-----
> From: Elvis Dowson [mailto:elvis.dowson at gmail.com]
> Sent: Wednesday, 3 April 2013 3:42 AM
> To: John Williams
> Cc: meta-xilinx Mailing List; John Williams
> Subject: Re: MicroBlaze toolchain warping script
> 
> Hi,
>        Explicitly specifying PREFERRED_PROVIDERS in my local.conf file allowed the
> build to proceed, but currently fails at trying to compile libtool-cross_2.4.2.bb
> 
> # Set the toolchain mode to external Xilinx toolchain pre-compiled binary.
> TCMODE = "external-csl"
> CSL_TARGET_SYS_microblazeel = "microblazeel-unknown-linux-gnu"
> EXTERNAL_TOOLCHAIN = "/tool/xilinx/gnu/microblazeel-unknown-linux-gnu"
> EXTERNAL_TOOLCHAIN_SYSROOT = "/tool/xilinx/gnu/microblazeel-unknown-
> linux-gnu/microblazeel-unknown-linux-gnu/libc"
> #NO32LIBS = "0"
> 
> PREFERRED_PROVIDER_linux-libc-headers = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_linux-libc-headers-dev = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc = "external-sourcery-
> toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-initial = "external-
> sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-intermediate = "external-
> sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}g++ = "external-sourcery-
> toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}binutils = "external-sourcery-
> toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "external-
> sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}compilerlibs = "external-
> sourcery-toolchain"
> PREFERRED_PROVIDER_libgcc = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_eglibc = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/libc = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/libintl = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/libiconv = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_glibc-thread-db = "external-sourcery-toolchain"
> PREFERRED_PROVIDER_virtual/linux-libc-headers = "external-sourcery-
> toolchain"
> PREFERRED_PROVIDER_virtual/linux-libc-headers-dev = "external-sourcery-
> toolchain"
> PREFERRED_PROVIDER_gdbserver = "external-sourcery-toolchain"
> #PREFERRED_PROVIDER_virtual/gettext = "gettext"
> 
> # No need to re-compile the locale files
> GLIBC_INTERNAL_USE_BINARY_LOCALE = "precompiled"
> ENABLE_BINARY_LOCALE_GENERATION = ""
> 
> The build output error is as follows:
> 
> Build Configuration:
> BB_VERSION        = "1.17.1"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Ubuntu-12.10"
> TARGET_SYS        = "microblazeel-poky-linux"
> MACHINE           = "spartan-6-sp601-microblazeel"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.3+snapshot-20130402"
> TUNE_FEATURES     = "little-endian fpu-hard"
> meta
> meta-yocto        = "master-xilinx-sp601-gcc-
> 4.8:89226d57107c8240b18dadfde537d12b345f2a30"
> meta-xilinx       = "master-xilinx-sp601-gcc-
> 4.8:bbe2cb495fdbfc31eea422021548c0c95401c11a"
> toolchain-layer   = "master-xilinx-sp601-gcc-
> 4.8:525306f575eaa9c85309efade27450214359a780"
> meta-sourcery     = "master:93b749af70aef5db225b9cd4ef56dc88ed25a42b"
> 
> NOTE: Resolving any missing task queue dependencies
> NOTE: multiple providers are available for runtime linux-libc-headers-dev (linux-
> libc-headers, linux-libc-headers-yocto)
> NOTE: consider defining a PREFERRED_PROVIDER entry to match linux-libc-
> headers-dev
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ERROR: Function failed: do_configure (see
> /tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libtool-cross/2.4.2-
> r6.1/temp/log.do_configure.28247 for further information)
> ERROR: Logfile of failure stored in:
> /tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libtool-cross/2.4.2-
> r6.1/temp/log.do_configure.28247
> Log data follows:
> | DEBUG: Executing python function sysroot_cleansstate
> | DEBUG: Python function sysroot_cleansstate finished
> | DEBUG: SITE files ['endian-little', 'bit-32', 'microblaze-common',
> | 'common-linux', 'common-glibc', 'microblazeel-linux', 'common']
> | DEBUG: Executing shell function autotools_preconfigure
> | DEBUG: Shell function autotools_preconfigure finished
> | DEBUG: Executing shell function do_configure automake (GNU automake)
> | 1.12.6 Copyright (C) 2012 Free Software Foundation, Inc.
> | License GPLv2+: GNU GPL version 2 or later
> | <http://gnu.org/licenses/gpl-2.0.html>
> | This is free software: you are free to change and redistribute it.
> | There is NO WARRANTY, to the extent permitted by law.
> |
> | Written by Tom Tromey <tromey at redhat.com>
> |        and Alexandre Duret-Lutz <adl at gnu.org>.
> | AUTOV is 1.12
> | NOTE: Executing ACLOCAL="aclocal
> | --system-acdir=/tool/yocto/poky/build/tmp/work/microblazeel-poky-linux
> | /libtool-cross/2.4.2-r6.1/build/aclocal-copy/
> | --automake-acdir=/tool/yocto/poky/build/tmp/sysroots/x86_64-linux/usr/
> | share/aclocal-1.12" autoreconf --verbose --install --force
> | --exclude=libtoolize -I
> | /tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libtool-cross/
> | 2.4.2-r6.1/libtool-2.4.2/tests/
> | autoreconf: Entering directory `.'
> | autoreconf: configure.ac: not using Gettext
> | autoreconf: running: aclocal
> | --system-acdir=/tool/yocto/poky/build/tmp/work/microblazeel-poky-linux
> | /libtool-cross/2.4.2-r6.1/build/aclocal-copy/
> | --automake-acdir=/tool/yocto/poky/build/tmp/sysroots/x86_64-linux/usr/
> | share/aclocal-1.12 -I
> | /tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libtool-cross/
> | 2.4.2-r6.1/libtool-2.4.2/tests/ -I
> | /tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libtool-cross/
> | 2.4.2-r6.1/libtool-2.4.2/tests/ --force -I libltdl/m4
> | autoreconf: configure.ac: tracing
> | autoreconf: running:
> | /tool/yocto/poky/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> | --include=/tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libt
> | ool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
> | autoreconf: running:
> | /tool/yocto/poky/build/tmp/sysroots/x86_64-linux/usr/bin/autoheader
> | --include=/tool/yocto/poky/build/tmp/work/microblazeel-poky-linux/libt
> | ool-cross/2.4.2-r6.1/libtool-2.4.2/tests/ --force
> | autoreconf: running: automake --foreign --add-missing --copy
> | --force-missing
> | autoreconf: running: gnu-configize
> | autoreconf: Leaving directory `.'
> | NOTE: Running /tool/yocto/poky/build/tmp/work/microblazeel-poky-
> linux/libtool-cross/2.4.2-r6.1/libtool-2.4.2/configure  --build=x86_64-linux    --
> host=microblazeel-poky-linux    --target=microblazeel-poky-linux    --prefix=/usr
> --exec_prefix=/usr    --bindir=/usr/bin    --sbindir=/usr/sbin    --
> libexecdir=/usr/lib/libtool    --
> datadir=/tool/yocto/poky/build/tmp/sysroots/spartan-6-sp601-
> microblazeel/usr/share    --sysconfdir=/etc    --sharedstatedir=/com    --
> localstatedir=/var    --libdir=/usr/lib    --includedir=/usr/include    --
> oldincludedir=/usr/include    --
> infodir=/tool/yocto/poky/build/tmp/sysroots/spartan-6-sp601-
> microblazeel/usr/share/info    --
> mandir=/tool/yocto/poky/build/tmp/sysroots/spartan-6-sp601-
> microblazeel/usr/share/man    --disable-silent-rules    --disable-dependency-
> tracking    --with-libtool-sysroot=/tool/yocto/poky/build/tmp/sysroots/spartan-
> 6-sp601-microblazeel --with-sysroot
> | configure: WARNING: unrecognized options: --disable-silent-rules,
> | --with-sysroot
> | configure: loading site script
> | /tool/yocto/poky/meta/site/endian-little
> | configure: loading site script /tool/yocto/poky/meta/site/common-linux
> | configure: loading site script /tool/yocto/poky/meta/site/common-glibc
> | configure: loading site script /tool/yocto/poky/meta/site/common
> | configure: loading site script
> | /tool/yocto/meta-xilinx/site/microblaze-common
> | ## ------------------------- ##
> | ## Configuring libtool 2.4.2 ##
> | ## ------------------------- ##
> |
> | checking for a BSD-compatible install... /usr/bin/install -c checking
> | whether build environment is sane... yes checking for
> | microblazeel-poky-linux-strip... microblazeel-unknown-linux-gnu-strip
> | checking for a thread-safe mkdir -p... /bin/mkdir -p checking for
> | gawk... gawk checking whether make sets $(MAKE)... yes checking build
> | system type... x86_64-pc-linux-gnu checking host system type...
> | Invalid configuration `microblazeel-poky-linux': machine
> | `microblazeel-poky' not recognized

Looks like libtool needs  a config.sub update maybe?

Our focus for now is against Danny, so we have a stable target to base from.  We've not done any builds against yocto master.

Rgds,

John