[meta-xilinx] meta-xilinx Digest, Vol 9, Issue 3

Tue Nov 19 06:28:41 PST 2013

Thanks Mike!

I have now created an ext4 partition where the complete rootfs is placed.
Replaced the devicetree.dtb with the one generated from bitbake  >>
.../uImage-zedboard-zynq7-mmcblk0p2.dtb

The uboot gives following error >> Error: Timeout waiting for FPGA to
config.
How should I apply the FPGA bit file?
Is there any way to boot the linux without configure the FPGA?

U-Boot 2013.01-dirty (Jun 14 2013 - 16:25:48)

DRAM:  512 MiB
WARNING: Caches not enabled
MMC:   zynq_sdhci: 0
SF: Detected S25FL129P_64K with page size 64 KiB, total 16 MiB
In:    serial
Out:   serial
Err:   serial
Net:   Gem.e000b000
Hit any key to stop autoboot:  0
Copying Linux from SD to RAM...
Device: zynq_sdhci
Manufacturer ID: 2
OEM: 544d
Name: SA04G
Tran Speed: 50000000
Rd Block Len: 512
SD version 2.0
High Capacity: Yes
Capacity: 3.6 GiB
Bus Width: 4-bit
Loading bitstream from SD/MMC/eMMC to RAM..
Device: zynq_sdhci
Manufacturer ID: 2
OEM: 544d
Name: SA04G
Tran Speed: 50000000
Rd Block Len: 512
SD version 2.0
High Capacity: Yes
Capacity: 3.6 GiB
Bus Width: 4-bit
reading system.bit.bin
2858832 bytes read in 394 ms (6.9 MiB/s)
Error: Timeout waiting for FPGA to config.
fpga - loadable FPGA image support

Usage:
fpga [operation type] [device number] [image address] [image size]
fpga operations:
  dump  [dev]                   Load device to memory buffer
  info  [dev]                   list known device information
  load  [dev] [address] [size]  Load device from memory buffer
  loadb [dev] [address] [size]  Load device from bitstream buffer (Xilinx
only)
  loadmk [dev] [address]        Load device generated with mkimage
        For loadmk operating on FIT format uImage address must include
        subimage unit name in the form of addr:<subimg_uname>
zynq-uboot>

Kind Regards
Anders Berndtsson

-----Original Message-----
From: meta-xilinx-bounces at yoctoproject.org
[mailto:meta-xilinx-bounces at yoctoproject.org] On Behalf Of
meta-xilinx-request at yoctoproject.org
Sent: den 14 november 2013 21:00
To: meta-xilinx at yoctoproject.org
Subject: meta-xilinx Digest, Vol 9, Issue 3

Send meta-xilinx mailing list submissions to
	meta-xilinx at yoctoproject.org

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.yoctoproject.org/listinfo/meta-xilinx
or, via email, send a message with subject or body 'help' to
	meta-xilinx-request at yoctoproject.org

You can reach the person managing the list at
	meta-xilinx-owner at yoctoproject.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of meta-xilinx digest..."

Today's Topics:

   1. Re: SD Card image and Function faild: do_packages_qa
      (Mike Looijmans)

----------------------------------------------------------------------

Message: 1
Date: Thu, 14 Nov 2013 11:54:25 +0100
From: Mike Looijmans <mike.looijmans at topic.nl>
To: <meta-xilinx at yoctoproject.org>
Subject: Re: [meta-xilinx] SD Card image and Function faild:
	do_packages_qa
Message-ID: <5284ABE1.8000308 at topic.nl>
Content-Type: text/plain; charset="utf-8"; format=flowed

?On 11/14/2013 11:15 AM, Anders Berndtsson wrote:
> Hi all,
>
> What controls the format of the output image files?

The IMAGE_FSTYPES variable in the recipes and/or config file.

For the zedboard SD card, just unpack the tars onto the card on your PC
(first partition must be FAT, I recommend using a second ext4 partition for
the rootfs).

Mike.

Met vriendelijke groet / kind regards,

Mike Looijmans

TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) ? (0)499 - 33.69.79
Telefax: (+31) - (0)499 - 33.69.70
E-mail: mike.looijmans at topic.nl
Website: www.topic.nl

Dit e-mail bericht en de eventueel daarbij behorende bijlagen zijn
uitsluitend bestemd voor de geadresseerde, zoals die blijkt uit het e-mail
bericht en/of de bijlagen. Er kunnen gegevens met betrekking tot een derde
instaan. Indien u als niet-geadresseerde dit bericht en de bijlagen
ontvangt, terwijl u niet bevoegd of gemachtigd bent om dit bericht namens de
geadresseerde te ontvangen, wordt u verzocht de afzender hierover direct te
informeren en het e-mail bericht met de bijlagen te vernietigen. Ieder
gebruik van de inhoud van het e-mail bericht, waaronder de daarbij behorende
bijlagen, door een ander dan de geadresseerde is onrechtmatig jegens ons dan
wel de eventueel in het e-mail bericht of de bijlagen voorkomende andere
personen. TOPIC Embedded Systems is niet aansprakelijk voor enigerlei schade
voortvloeiend uit het gebruik en/of acceptatie van dit e-mail bericht of de
daarbij behorende bijlagen.

The contents of this message, as well as any enclosures, are addressed
personally to, and thus solely intended for the addressee. They may contain
information regarding a third party. A recipient who is neither the
addressee, nor empowered to receive this message on behalf of the addressee,
is kindly requested to immediately inform the sender of receipt, and to
destroy the message and the enclosures. Any use of the contents of this
message and/or the enclosures by any other person than the addressee or
person who is empowered to receive this message, is illegal towards the
sender and/or the aforementioned third party. TOPIC Embedded Systems is not
liable for any damage as a result of the use and/or acceptance of this
message and as well as any enclosures.

------------------------------

_______________________________________________
meta-xilinx mailing list
meta-xilinx at yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx

End of meta-xilinx Digest, Vol 9, Issue 3
*****************************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: devicetree.dtb
Type: application/octet-stream
Size: 23080 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20131119/9e8f2289/attachment.obj>