[meta-xilinx] bitbaked u-boot on zedboard

[Philip Balister]

On 10/07/2013 01:36 AM, Mike Looijmans wrote:
> Here's a project that's doing it without the FSBL. I really like that
> approach:
> 
> http://sourceforge.net/p/elphel/ezynq/

This is really nice!

Thanks Mike

> 
> 
> On 10/05/2013 09:37 PM, Philip Balister wrote:
>> On 10/05/2013 03:31 PM, Matthias Dübon wrote:
>>> Hello everyone,
>>>
>>> I am just playing around with poky and the meta-xilinx layer for the
>>> zedboard. I was able to build (bitbake u-boot-xlnx) a u-boot version.
>>> Unfortunately this version is not runnable, I don't even see any
>>> output on
>>> the serial console. Up to now I didn't dive in deeper to the subject.
>>> But I
>>> am wondering, if what I want to do is principally doable. Is the
>>> meta-xilinxlayer (
>>> dylan branch) tested for the Zed board? Can I expect that the "bitbaked"
>>> toolchain is working for the Zynq?
>>>
>>> Does anyone already have any experience with the meta-xilinx layer on
>>> the
>>> zedboard?
>>
>> You need to make a boot.bin file from the output of the u-boot recipe.
>>
>> See:
>>
>> https://github.com/balister/meta-xilinx/commits/boot-bin-2
>>
>> The last two commits and support for building BOOT.BIN as part of the
>> u-boot recipe. Very useful. They include a fsbl.elf for the zedboard.
>>
> 
> 
> 
> Met vriendelijke groet / kind regards,
> 
> Mike Looijmans
> 
> TOPIC Embedded Systems
> Eindhovenseweg 32-C, NL-5683 KH Best
> Postbus 440, NL-5680 AK Best
> Telefoon: (+31) – (0)499 - 33.69.79
> Telefax: (+31) - (0)499 - 33.69.70
> E-mail: mike.looijmans at topic.nl
> Website: www.topic.nl
> 
> Dit e-mail bericht en de eventueel daarbij behorende bijlagen zijn
> uitsluitend bestemd voor de geadresseerde, zoals die blijkt uit het
> e-mail bericht en/of de bijlagen. Er kunnen gegevens met betrekking tot
> een derde instaan. Indien u als niet-geadresseerde dit bericht en de
> bijlagen ontvangt, terwijl u niet bevoegd of gemachtigd bent om dit
> bericht namens de geadresseerde te ontvangen, wordt u verzocht de
> afzender hierover direct te informeren en het e-mail bericht met de
> bijlagen te vernietigen. Ieder gebruik van de inhoud van het e-mail
> bericht, waaronder de daarbij behorende bijlagen, door een ander dan de
> geadresseerde is onrechtmatig jegens ons dan wel de eventueel in het
> e-mail bericht of de bijlagen voorkomende andere personen. TOPIC
> Embedded Systems is niet aansprakelijk voor enigerlei schade
> voortvloeiend uit het gebruik en/of acceptatie van dit e-mail bericht of
> de daarbij behorende bijlagen.
> 
> The contents of this message, as well as any enclosures, are addressed
> personally to, and thus solely intended for the addressee. They may
> contain information regarding a third party. A recipient who is neither
> the addressee, nor empowered to receive this message on behalf of the
> addressee, is kindly requested to immediately inform the sender of
> receipt, and to destroy the message and the enclosures. Any use of the
> contents of this message and/or the enclosures by any other person than
> the addressee or person who is empowered to receive this message, is
> illegal towards the sender and/or the aforementioned third party. TOPIC
> Embedded Systems is not  liable for any damage as a result of the use
> and/or acceptance of this message and as well as any enclosures.
> 
>