[meta-xilinx] problems mounting rootfs

[Matthias Dübon]

Hi Philip,

thanks for your help, in the end, the problem was quite simple. In the
u-boot settings I configured a ramdisk to be loaded. After removing this,
everything is fine.

btw. what did you mean by "p1 fails to mount"? Is p1 the first partition in
/etc/fstab?

Matthias


Mit freundlichen Grüßen
Matthias Dübon

__________________________________________________
Ingenieurbüro Dübon
Vor dem Kreuzberg 28
D-72070 Tübingen

Tel  +49 (0) 7071.138 41 61
matthias.duebon at ing-duebon.de
www.ing-duebon.de


On Wed, Oct 9, 2013 at 3:00 PM, Philip Balister <philip at balister.org> wrote:

> On 10/09/2013 08:55 AM, Matthias Dübon wrote:
> > Hello,
> >
> > I used poky and the meta-xilinx toolchain to build
> > - u-boot
> > - uImage
> > - rootfs
> >
> > for a zedboard.
> >
> > The kernel command line is:
> > console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4
> > rootwait devtmpfs.mount=1
> >
> > The problem is, the rootfs on /dev/mmcblk0p2 is not mounted. But the same
> > setup was running when using the linux-digilent kernel.
>
> The messages suggest it is mounted, but there may be some funny entries
> in /etc/fstab. It looks like p1 fails to mount.
>
> Philip
>
> >
> > Please find the boot messages in log.txt.
> >
> > thanks for any help,
> > Matthias
> >
> >
> >
> > _______________________________________________
> > meta-xilinx mailing list
> > meta-xilinx at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-xilinx
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20131011/6600ed8b/attachment.html>