[meta-xilinx] Address location for binaries...

[Alan DuBoff]

On Wed, February 19, 2014 1:17 am, Elvis Dowson wrote:
> I think you have to create your own ramdisk. I haven’t attempted to get the
> ramdisk
> built automatically using yocto yet.

There is a initramfs-boot package, but it doesn't put anything in the
deploy/images directory, as best I can tell...

> Here are the commands that I’ve used in the past, to manually create a ramdisk
> for zynq-7.

That is super helpful. I will do this tomorrow, it's getting late here, I'm in
the U.S.

I see this in my work directory for the linux-xlnx directory. Path is below,
on dora 10.0.1.

[aland at eagle boot]$ ls -l
total 12596
-rw-r--r-- 2 aland aland   66212 Feb 17 03:37 config-3.8.11-xilinx
-rw-r--r-- 2 aland aland   23080 Feb 17 03:37
devicetree-uImage-zedboard-zynq7-mmcblk0p2.dtb
-rw-r--r-- 2 aland aland   23072 Feb 17 03:37
devicetree-uImage-zedboard-zynq7-ram.dtb
-rw-r--r-- 2 aland aland  273829 Feb 17 03:37 Module.symvers-3.8.11-xilinx
-rw-r--r-- 2 aland aland 1426345 Feb 17 03:37 System.map-3.8.11-xilinx
-rw-r--r-- 2 aland aland 2858848 Feb 17 03:37 uImage-3.8.11-xilinx
-rw-r--r-- 2 aland aland 8213467 Feb 17 03:37 vmlinux-3.8.11-xilinx

[aland at eagle boot]$ pwd
/home/aland/src/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/3.8-xilinx+gitf4ff79d44a966ebea6229213816d17eb472b303e-r1/package/boot

[aland at eagle boot]$ file uImage-3.8.11-xilinx
uImage-3.8.11-xilinx: u-boot legacy uImage, Linux-3.8.11-xilinx, Linux/ARM, OS
Kernel Image (Not compressed), 2858784 bytes, Sun Feb 16 02:04:34 2014, Load
Address: 0x00008000, Entry Point: 0x00008000, Header CRC: 0x1CC0A989, Data
CRC: 0x7FFDE464

[aland at eagle boot]$ file vmlinux-3.8.11-xilinx
vmlinux-3.8.11-xilinx: ELF 32-bit LSB executable, ARM, version 1 (SYSV),
statically linked, BuildID[sha1]=0x33802cbe6477e8bc94e4612b588dfe2fced3fbc2,
not stripped

-- 
Cheers,
Alan