[meta-xilinx] microZed using meta-topic

[Oleg K Dzhimiev]

Alan,

http://wiki.elphel.com/index.php?title=Yocto_tests
>
Just tried from Step 1 - it worked.

I am not sure why their git fails using the git protocol
>
Basically, this command should just work from the terminal:

> git clone -b master-next git://github.com/Xilinx/u-boot-xlnx.gitu-boot-xlnx
>

My git version is 1.8.3.2 and Kubuntu is 13.10 (and 13.04). Yours?
The ezynq recipe overrides do_fetch() and runs exactly that line. Then it
switches to revision 54fee227ef141214141a226efd17ae0516deaf32.

If "git clone" worked then what log.do_fetch says?

So, I manually clone github.com/Xilinx/u-boot-xlnx inside the git directory
> for u-boot-ezynq, but that doesn't work and I get a failure. When it goes
> to
> configure, about the microzed, so my guess is the patches didn't succeed
> even
> though they told me they did from bitbake.
>

When doing manually you might have cloned "master" branch accidentally -
after patching the configure surely fails - makefiles conflict.

Regards,
Oleg


On 23 March 2014 20:07, Alan DuBoff <aland at softorchestra.com> wrote:

> On Sat, March 1, 2014 12:59 am, Cjw X wrote:
> > I'm hosting a design that uses ezynq and will build for the microzed
> right
> > now.
>
> I've followed the notes on the wiki:
>
> http://wiki.elphel.com/index.php?title=Yocto_tests
>
> But it doesn't build cleanly...the Xilinx u-boot-xlnx is always a problem
> for
> me on all recipes, I am not sure why their git fails using the git
> protocol,
> but succeeds with https. I've tried to change that in the recipe but it
> still
> doesn't like using https...
>
> So, I manually clone github.com/Xilinx/u-boot-xlnx inside the git
> directory
> for u-boot-ezynq, but that doesn't work and I get a failure. When it goes
> to
> configure, about the microzed, so my guess is the patches didn't succeed
> even
> though they told me they did from bitbake.
>
> I saw a comment on your blog, and I couldn't have said it better:
>
> "In this post I write about our current development, my first experience
> with
> Xilinx Zynq, and also try to summarize the 10+ years experience with Xilinx
> FPGA devices. It is a mixture of the admiration for their state of the art
> silicon devices and frustration caused by the software."
>
> I could not over emphasize that last sentence if I wanted to... :-/
>
> Anyone has any ideas as I continue to hack my way to a clean build using
> ezynq?
>
> If I can get this built, I will just dump the Xilinx tools and be happy.
> That
> is the root of all problems building zynq...
>
> --
> Cheers,
> Alan
>
> --
> _______________________________________________
> meta-xilinx mailing list
> meta-xilinx at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-xilinx
>



-- 
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20140324/22518e3c/attachment.html>