[meta-xilinx] Ethernet PHY problems

[Mike Looijmans]

On 10-09-15 15:16, Alan Hughes wrote:
> The PHY is connected to Ethernet 0 (address e000b000).
>
> According to our board supplier the PHY address is 0, however I plan to try
> others just in case!

"0" is not a valid PHY address, it's the 'broadcast' address. Valid PHY 
addresses range from 1 to 31.

However, often a PHY address of '0' works, if it's the only one present. But 
you really should change it.


Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijmans at topicproducts.com
Website: www.topicproducts.com

Please consider the environment before printing this e-mail