[meta-xilinx] [PATCH 05/20] Add basic Xilinx HDF support
Jason Wu
jason.wu.misc at gmail.com
Tue Apr 12 05:36:49 PDT 2016
On 12/04/2016 7:02 PM, Nathan Rossi wrote:
> On Mon, Apr 11, 2016 at 11:23 PM, Jason Wu <jason.wu.misc at gmail.com> wrote:
>> This allows user to create bb to extract the bitstream and ps7_init_gpl.[h|c]
>> file from hdf file.
>
> This looks good, but I think it would be more useful as a bbclass
> instead of an include.
I can do it as bbclas and will do in v2
>
>>
>> Signed-off-by: Jason Wu <jason.wu.misc at gmail.com>
>> ---
>> recipes-bsp/hardware-definition-file/hdf.inc | 46 ++++++++++++++++++++++++++++
>> 1 file changed, 46 insertions(+)
>> create mode 100644 recipes-bsp/hardware-definition-file/hdf.inc
>>
>> diff --git a/recipes-bsp/hardware-definition-file/hdf.inc b/recipes-bsp/hardware-definition-file/hdf.inc
>> new file mode 100644
>> index 0000000..ba2e45c
>> --- /dev/null
>> +++ b/recipes-bsp/hardware-definition-file/hdf.inc
>> @@ -0,0 +1,46 @@
>> +SECTION = "bsp"
>> +DEPENDS += "unzip"
>> +
>> +S ?= "${WORKDIR}/${MACHINE}"
>> +
>> +PROVIDES = "virtual/hdf virtual/bitstream virtual/zynq7-platform-init"
>> +
>> +FILESEXTRAPATHS_prepend := "${THISDIR}/bsps:"
>
> This shouldn't be there by default, in case "bsps" has different
> content than expected.
I think this should be removed. This was a old code I had for testing
the local hdf.
>
>> +
>> +PLATFORM_INIT ?= "ps7_init_gpl.c \
>> + ps7_init_gpl.h"
>> +
>> +FILES_${PN} += " \
>> + ${PLATFORM_INIT_DIR}/ps7_init_gpl.c \
>> + ${PLATFORM_INIT_DIR}/ps7_init_gpl.h \
>> + download.bit \
>
> This can be split into two packages, ${PN}-platform-init and
> ${PN}-bitstream. So that it is easy to install either to the rootfs if
> that is desired.
sure, will do it v2. The v2 will have something like the followings:
+FILES_${PN}-platform-init += " \
+ ${PLATFORM_INIT_DIR}/ps7_init_gpl.c \
+ ${PLATFORM_INIT_DIR}/ps7_init_gpl.h \
+FILES_${PN}-bitstream += " \
+ download.bit \
Just to be sure this is what you after.
>
>> + "
>> +
>> +BITSTREAM ?= "bitstream-${PV}-${PR}.bit"
>> +
>> +INHIBIT_DEFAULT_DEPS = "1"
>> +PACKAGE_ARCH = "${MACHINE_ARCH}"
>> +
>> +inherit zynq7-platform-paths
>> +
>> +do_install() {
>> + fn=$(unzip -l ${S}/${HDF} | awk '{print $NF}' | grep ".bit$")
>> + unzip -o ${S}/${HDF} ${fn} -d ${D}
>> + [ "${fn}" == "download.bit"] || mv ${D}/${fn} ${D}/download.bit
>> +
>> + install -d ${PLATFORM_INIT_STAGE_DIR}
>> + for fn in ${PLATFORM_INIT}; do
>> + unzip -o ${S}/${HDF} ${fn} -d ${PLATFORM_INIT_STAGE_DIR}
>> + done
>
> I will have to double check, but I think this might not work correctly
> due to sysroot staging. Which is why the zynq7-platform-init.inc uses
> the sysroot stage task
> (http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/tree/recipes-bsp/platform-init/zynq7-platform-init.inc#n17)
This was tested. So It may not work. I will have a look check with you
later.
Regards,
Jason
>
> Regards,
> Nathan
>
>> +}
>> +
>> +do_deploy () {
>> + if [ -e ${D}/download.bit ]; then
>> + install -d ${DEPLOY_DIR_IMAGE}
>> + install -m 0644 ${D}/download.bit ${DEPLOY_DIR_IMAGE}/${BITSTREAM}
>> + ln -sf ${BITSTREAM} ${DEPLOY_DIR_IMAGE}/download.bit
>> + # for u-boot 2016.3 with spl load bitstream patch
>> + ln -sf ${BITSTREAM} ${DEPLOY_DIR_IMAGE}/bitstream
>> + fi
>> +}
>> +addtask deploy before do_build after do_install
>> --
>> 1.9.1
>>
>> --
>> _______________________________________________
>> meta-xilinx mailing list
>> meta-xilinx at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-xilinx
More information about the meta-xilinx
mailing list