[meta-xilinx] Problem with Xilinx QEMU & Yocto Flow

[Alistair Francis]

On Mon, Nov 21, 2016 at 8:26 AM, SMITH Peter T <peter.t.smith at alstom.com> wrote:
> Hi,
>
>
>
> I am trying to run Xilinx’s QEMU (as built by meta-xilinx release 2016.3)
> and am receiving the following error
>
>
>
> qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS (try
> passing a device tree using -dtb)
>
>
>
> on running ../sources/meta-xilinx/scripts/runqemu qemuzynqmp as instructed
> here http://www.wiki.xilinx.com/QEMU+Yocto+Flow
>
>
>
> Any clues as to what is wrong?

Hello Peter,

That is a strange error. I haven't seen that before with the Yocto flow.

I'll see if I can reproduce it. Have you made any changes to the
default/standard flow?

Thanks,

Alistair

>
>
>
> Here is the log
>
> peter at peter-VirtualBox:/yocto/peter/CSP/build$
> ../sources/meta-xilinx/scripts/runqemu qemuzynqmp
>
>
>
> Continuing with the following parameters:
>
> KERNEL:
> [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6-xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin]
>
> ROOTFS:
> [/yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/petalinux-minimal-csprtguest-zynqmp-20161121130524.rootfs.ext3]
>
> FSTYPE: [ext3]
>
> Setting up tap interface under sudo
>
> Acquiring lockfile for tap0...
>
> -net nic -net nic -net nic -net nic -net
> user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M arm-generic-fdt
> -serial mon:stdio -device
> loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-trusted-firmware-aarch64.elf,cpu=0
> -hw-dtb
> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetrees/zcu102-arm-single.dtb
> -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp
> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp    -m 2048
>
> Running qemu-system-aarch64...
>
> /yocto/peter/CSP/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-xilinx/qemu-system-aarch64
> -kernel
> /yocto/peter/CSP/build/tmp/deploy/images/csprtguest-zynqmp/Image--4.6-xilinx+git0+0e4e407149-r0-csprtguest-zynqmp-20161121130524.bin
> -net nic -net nic -net nic -net nic -net
> user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.0.2.2 -M arm-generic-fdt
> -serial mon:stdio -device
> loader,file=/yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/arm-trusted-firmware-aarch64.elf,cpu=0
> -hw-dtb
> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp/qemu-hw-devicetrees/zcu102-arm-single.dtb
> -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -nographic -tftp
> /yocto/peter/CSP/build/tmp/deploy/images/qemuzynqmp -no-reboot -m 2048
> -serial null -append "mem= rootfstype=ext3 "
>
> --------------------------------------------------------------------
>
> Xilinx QEMU Nov 21 2016 16:09:08.
>
> --------------------------------------------------------------------
>
> qemu: RAM size must be less than 4GB to boot Linux kernel using ATAGS (try
> passing a device tree using -dtb)
>
> Set 'tap0' nonpersistent
>
> Releasing lockfile of preconfigured tap device 'tap0'
>
>
>
>
>
> Peter Smith
>
> Principal Engineer, Chief Engineering, Grid Solutions
>
>
>
> T +44 1785 786406
>
>
>
>
> ________________________________
> CONFIDENTIALITY : This e-mail and any attachments are confidential and may
> be privileged. If you are not a named recipient, please notify the sender
> immediately and do not disclose the contents to another person, use it for
> any purpose or store or copy the information in any medium.
>
> --
> _______________________________________________
> meta-xilinx mailing list
> meta-xilinx at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-xilinx
>