[meta-xilinx] Question on QEMU failure

[Alistair Francis]

On Tue, Oct 18, 2016 at 3:34 PM, Mong, Tab (GE Transportation)
<Tab.Mong at ge.com> wrote:
> Hello,
>
>
>
> Having trouble launching QEMU for the ZCU102 configuration.  Here is the
> output of the QEMU command.  What am I missing?
>
>
>
> I see it is picking the wrong MACHINE and CPU but can’t find the right
> combination of command line options/environment variables to get it to boot
> properly.
>
>
>
> BuildMachine:~/CleanRoom/poky/build$ runqemu qemuarm64

You are running the AArch64 virt machine,that won't work.

Try using the qemuzynqmp machine.

Thanks,

Alistair

> tmp/deploy/images/zcu102-zynqmp/Image-zcu102-zynqmp.bin
> tmp/deploy/images/zcu102-zynqmp/diskimage.ext4 qemuparams="-m 2048"
>
>
>
> Continuing with the following parameters:
>
> KERNEL: [tmp/deploy/images/zcu102-zynqmp/Image-zcu102-zynqmp.bin]
>
> ROOTFS:
> [/home/trmong/CleanRoom/poky/build/tmp/deploy/images/zcu102-zynqmp/diskimage.ext4]
>
> FSTYPE: [ext4]
>
> Acquiring lockfile for tap0...
>
> Using preconfigured tap device 'tap0'
>
> If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu
> skip tap0.
>
> -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -device
> virtio-net-device,netdev=net0  -machine virt -cpu cortex-a57 -drive
> id=disk0,file=/home/trmong/CleanRoom/poky/build/tmp/deploy/images/zcu102-zynqmp/diskimage.ext4,if=none,format=raw
> -device virtio-blk-device,drive=disk0 -nographic   -m 2048
>
> Running qemu-system-aarch64...
>
> /home/trmong/CleanRoom/poky/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64
> -kernel tmp/deploy/images/zcu102-zynqmp/Image-zcu102-zynqmp.bin -netdev
> tap,id=net0,ifname=tap0,script=no,downscript=no -device
> virtio-net-device,netdev=net0 -machine virt -cpu cortex-a57 -drive
> id=disk0,file=/home/trmong/CleanRoom/poky/build/tmp/deploy/images/zcu102-zynqmp/diskimage.ext4,if=none,format=raw
> -device virtio-blk-device,drive=disk0 -nographic -no-reboot -m 2048 -serial
> mon:stdio -m 2048 -device virtio-serial-device -chardev null,id=virtcon
> -device virtconsole,chardev=virtcon --append "root=/dev/vda rw
> console=ttyAMA0,38400 mem=2048M highres=off
> ip=192.168.7.2::192.168.7.1:255.255.255.0 rootfstype=ext4 "
>
> qemu: terminating on signal 15 from pid 14352
>
> Releasing lockfile of preconfigured tap device 'tap0'
>
> BuildMachine:~/CleanRoom/poky/build$
>
>
>
>
>
> Thanks.
>
>
>
> Tab
>
>
> --
> _______________________________________________
> meta-xilinx mailing list
> meta-xilinx at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-xilinx
>