[meta-xilinx] [PATCH 3/9] README.*: Fix up bullet point nesting

[Alistair Francis]

On Thu, Apr 20, 2017 at 3:35 AM, Nathan Rossi <nathan at nathanrossi.com> wrote:
> Fix up the indent for nested bullet lists.
>
> Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>

Reviewed-by: Alistair Francis <alistair.francis at xilinx.com>

Thanks,

Alistair

> ---
>  README.booting.md | 29 +++++++++++++++++------------
>  README.md         | 12 +++++++-----
>  2 files changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/README.booting.md b/README.booting.md
> index a22ddb7bd3..f1ff39d550 100644
> --- a/README.booting.md
> +++ b/README.booting.md
> @@ -3,7 +3,8 @@ Booting meta-xilinx boards
>
>  Contents
>  --------
> - * [Loading via JTAG](#loading-via-jtag)
> +
> +* [Loading via JTAG](#loading-via-jtag)
>    * [XSDB](#xsdb)
>    * [Load Bitstream](#load-bitstream)
>    * [Load U-Boot (MicroBlaze)](#load-u-boot-microblaze)
> @@ -11,14 +12,14 @@ Contents
>    * [U-Boot Console](#u-boot-console)
>    * [Kernel, Root Filesystem and Device Tree](#kernel-root-filesystem-and-device-tree)
>    * [Booting via U-Boot](#booting-via-u-boot)
> - * [Loading via SD](#loading-via-sd)
> +* [Loading via SD](#loading-via-sd)
>    * [Preparing SD/MMC](#preparing-sdmmc)
>    * [Installing U-Boot](#installing-u-boot)
>    * [Installing Kernel and Device Tree](#installing-kernel-and-device-tree)
>    * [Installing Root Filesystem](#installing-root-filesystem)
>    * [U-Boot Configuration File](#u-boot-configuration-file)
>    * [Booting](#booting)
> - * [Loading via TFTP](#loading-via-tftp)
> +* [Loading via TFTP](#loading-via-tftp)
>    * [Kernel, Root Filesystem and Device Tree](#kernel-root-filesystem-and-device-tree-1)
>    * [Booting via U-Boot](#booting-via-u-boot-1)
>
> @@ -143,19 +144,22 @@ how large the ramdisk is.
>
>  ### Installing U-Boot
>  Add the following files to the first partition:
> - * `boot.bin`
> - * `u-boot.img` (if using u-boot-xlnx)
> - * `u-boot-dtb.img` (if using u-boot)
> +
> +* `boot.bin`
> +* `u-boot.img` (if using u-boot-xlnx)
> +* `u-boot-dtb.img` (if using u-boot)
>
>  ### Installing Kernel and Device Tree
>  Add the following files to the first partition:
> - * `uImage`
> - * `<machine name>.dtb`
> +
> +* `uImage`
> +* `<machine name>.dtb`
>
>  ### Installing Root Filesystem
>  If using a ramdisk also add the `.cpio.gz.u-boot` type of root filesystem image
>  to the first partition.
> - * `core-image-minimal-<machine name>.cpio.gz.u-boot`
> +
> +* `core-image-minimal-<machine name>.cpio.gz.u-boot`
>
>  If using the SD card as the root filesystem, populate the second partition with
>  the content of the root filesystem. To install the root filesystem extract the
> @@ -198,9 +202,10 @@ Boot your system into U-Boot, using one of boot methods (e.g. JTAG, SD, QSPI).
>
>  ### Kernel, Root Filesystem and Device Tree
>  Place the following images into the root of the TFTP server directory:
> - * `core-image-minimal-<machine name>.cpio.gz.u-boot`
> - * `uImage` (Zynq) or `linux.bin.ub` (MicroBlaze)
> - * `<machine name>.dtb`
> +
> +* `core-image-minimal-<machine name>.cpio.gz.u-boot`
> +* `uImage` (Zynq) or `linux.bin.ub` (MicroBlaze)
> +* `<machine name>.dtb`
>
>  ### Booting via U-Boot
>  The serial console of the target board will display the U-Boot console.
> diff --git a/README.md b/README.md
> index c3fc60682e..eef021428f 100644
> --- a/README.md
> +++ b/README.md
> @@ -4,18 +4,20 @@ meta-xilinx
>  This layer provides support for MicroBlaze, Zynq and ZynqMP.
>
>  Additional documentation:
> - * [Building](README.building.md)
> - * [Booting](README.booting.md)
> +
> +* [Building](README.building.md)
> +* [Booting](README.booting.md)
>
>  Supported Boards/Machines
>  =========================
>
>  Boards/Machines supported by this layer:
> - * MicroBlaze:
> +
> +* MicroBlaze:
>    * [Xilinx ML605 (QEMU)](conf/machine/ml605-qemu-microblazeel.conf) - `ml605-qemu-microblazeel` (QEMU support)
>    * [Xilinx S3A DSP 1800 (QEMU)](conf/machine/s3adsp1800-qemu-microblazeeb.conf) - `s3adsp1800-qemu-microblazeeb` (QEMU support)
>    * [Xilinx KC705](conf/machine/kc705-microblazeel.conf) - `kc705-microblazeel`
> - * Zynq:
> +* Zynq:
>    * [Zynq (QEMU)](conf/machine/qemu-zynq7.conf) - `qemu-zynq7` (QEMU Support)
>    * [Xilinx ZC702](conf/machine/zc702-zynq7.conf) - `zc702-zynq7`
>    * [Xilinx ZC706](conf/machine/zc706-zynq7.conf) - `zc706-zynq7`
> @@ -24,7 +26,7 @@ Boards/Machines supported by this layer:
>    * [Avnet/Digilent ZedBoard](conf/machine/zedboard-zynq7.conf) - `zedboard-zynq7`
>    * [Digilent Zybo](conf/machine/zybo-zynq7.conf) - `zybo-zynq7`
>    * [Digilent Zybo Linux BD](conf/machine/zybo-linux-bd-zynq7.conf) - `zybo-linux-bd-zynq7`
> - * ZynqMP:
> +* ZynqMP:
>    * [Xilinx EP108](conf/machine/ep108-zynqmp.conf) - `ep108-zynqmp` (QEMU support)
>    * [Xilinx ZCU102](conf/machine/zcu102-zynqmp.conf) - `zcu102-zynqmp` (QEMU support)
>
> --
> 2.11.0
>
> --
> _______________________________________________
> meta-xilinx mailing list
> meta-xilinx at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-xilinx