[meta-xilinx] Rocko with meta-xilinx doesn't boot on ZynqMP zynqmp_clk_get_periphial_rate

[Forstmayr, Franz]

Hey,

I just cloned the rocko branch of yocto and the master branch of meta-xilinx and wanted to build a core-image-minimal first.

Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:33
Parsing of 841 .bb files complete (0 cached, 841 parsed). 2154 targets, 226 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.36.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "ubuntu-16.04"
TARGET_SYS        = "aarch64-poky-linux"
MACHINE           = "zcu102-zynqmp"
DISTRO            = "poky"
DISTRO_VERSION    = "2.4"
TUNE_FEATURES     = "aarch64"
TARGET_FPU        = ""
meta
meta-poky
meta-yocto-bsp    = "rocko:f7b90ab3eaf832bd81f3efc1dab4dcf6863ac284"
meta-xilinx       = "master:82ac762e83e37e45db3fbe38ad1e21114a3426b6"

Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: core-image-minimal-1.0-r0 do_rootfs: [log_check] core-image-minimal: found 1 warning message in the logfile:
[log_check] warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed, exit status 1

NOTE: Tasks Summary: Attempted 2792 tasks of which 6 didn't need to be rerun and all succeeded.

Summary: There was 1 WARNING message shown.

After copying the relevant files to my sd, I get following output.


U-Boot SPL 2017.01 (Dec 04 2017 - 14:49:28)

EL Level:       EL3

Trying to boot from MMC1

reading u-boot.bin

reading atf-uboot.ub

reading atf-uboot.ub

NOTICE:  ATF running on XCZU9EG/silicon v4/RTL5.1 at 0xfffea000, with PMU firmware

NOTICE:  BL31: Secure code at 0x0

NOTICE:  BL31: Non secure code at 0x8000000

NOTICE:  BL31: v1.3(release):f9b244b

NOTICE:  BL31: Built : 13:59:16, Dec  4 2017

PMUFW:  v0.3

zynqmp_clk_get_peripheral_rate mio read fail

failed to get rate

zynqmp_clk_get_peripheral_rate mio read fail

failed to get rate

Is there something wrong with my setup? I have no modifications so far.

Mit freundlichen Grüßen
Kind Regards

Franz Forstmayr
Research & Development
Electronic Circuits and Systems

[cid:image003.png at 01D36D15.6A51C180]
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Hauptstraße 1, 83413 Fridolfing, Germany
Phone

+49 8684 18-0

Fax

franz.forstmayr at rosenberger.com<mailto:franz.forstmayr at rosenberger.com>

www.rosenberger.com<http://www.rosenberger.com>



The information contained in this message is confidential.
Data security advice: Please be aware, that data exchange via Internet or E-Mail is not 100% safe. Therefore, please handle sensitive or confidential (bank) data with care. Please take note, that Rosenberger is not asking you for bank data or providing you such data via E-Mail, in principle. In case of deviations or questions please contact us immediately.



**

Rosenberger Hochfrequenztechnik GmbH & Co. KG, Registergericht: Amtsgericht Traunstein, HRA 5566

persönlich haftender Gesellschafter:
Rosenberger Hochfrequenztechnik GmbH, Registergericht: Amtsgericht Traunstein, HRB 4405

Geschäftsführer: Dipl.-Kfm. Hans Rosenberger, Dipl.-Ing. Bernhard Rosenberger, Dipl.-Ing. Peter Rosenberger, Dr. rer. nat. Tosja Zywietz

Disclaimer http://www.rosenberger.com/Disclaimer/disclaimer.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20171204/e46174d0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 4330 bytes
Desc: image003.png
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20171204/e46174d0/attachment.png>