[meta-xilinx] Rocko with meta-xilinx doesn't boot on ZynqMP zynqmp_clk_get_periphial_rate
Manjukumar Harthikote Matha
MANJUKUM at xilinx.com
Mon Dec 4 17:37:04 PST 2017
> -----Original Message-----
> From: meta-xilinx-bounces at yoctoproject.org [mailto:meta-xilinx-
> bounces at yoctoproject.org] On Behalf Of Alistair Francis
> Sent: Monday, December 04, 2017 9:20 AM
> To: Forstmayr, Franz <Franz.Forstmayr at rosenberger.com>
> Cc: meta-xilinx at yoctoproject.org
> Subject: Re: [meta-xilinx] Rocko with meta-xilinx doesn't boot on ZynqMP
> zynqmp_clk_get_periphial_rate
>
> On Mon, Dec 4, 2017 at 6:34 AM, Forstmayr, Franz
> <Franz.Forstmayr at rosenberger.com <mailto:Franz.Forstmayr at rosenberger.com> >
> wrote:
>
>
> Hey,
>
>
>
> I just cloned the rocko branch of yocto and the master branch of meta-xilinx
> and wanted to build a core-image-minimal first.
>
>
>
> Parsing recipes: 100%
> |###################################################################
> ####################################################################
> #################################| Time: 0:00:33
>
> Parsing of 841 .bb files complete (0 cached, 841 parsed). 2154 targets, 226
> skipped, 0 masked, 0 errors.
>
> NOTE: Resolving any missing task queue dependencies
>
>
>
> Build Configuration:
>
> BB_VERSION = "1.36.0"
>
> BUILD_SYS = "x86_64-linux"
>
> NATIVELSBSTRING = "ubuntu-16.04"
>
> TARGET_SYS = "aarch64-poky-linux"
>
> MACHINE = "zcu102-zynqmp"
>
> DISTRO = "poky"
>
> DISTRO_VERSION = "2.4"
>
> TUNE_FEATURES = "aarch64"
>
> TARGET_FPU = ""
>
> meta
>
> meta-poky
>
> meta-yocto-bsp = "rocko:f7b90ab3eaf832bd81f3efc1dab4dcf6863ac284"
>
> meta-xilinx = "master:82ac762e83e37e45db3fbe38ad1e21114a3426b6"
>
>
>
> Initialising tasks: 100%
> |###################################################################
> ####################################################################
> ##############################| Time: 0:00:03
>
> NOTE: Executing SetScene Tasks
>
> NOTE: Executing RunQueue Tasks
>
> WARNING: core-image-minimal-1.0-r0 do_rootfs: [log_check] core-image-
> minimal: found 1 warning message in the logfile:
>
> [log_check] warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp)
> scriptlet failed, exit status 1
>
>
>
> NOTE: Tasks Summary: Attempted 2792 tasks of which 6 didn't need to be
> rerun and all succeeded.
>
>
>
> Summary: There was 1 WARNING message shown.
>
>
>
> After copying the relevant files to my sd, I get following output.
>
>
>
> U-Boot SPL 2017.01 (Dec 04 2017 - 14:49:28)
> EL Level: EL3
> Trying to boot from MMC1
> reading u-boot.bin
> reading atf-uboot.ub
> reading atf-uboot.ub
> NOTICE: ATF running on XCZU9EG/silicon v4/RTL5.1 at 0xfffea000, with
> PMU firmware
> NOTICE: BL31: Secure code at 0x0
> NOTICE: BL31: Non secure code at 0x8000000
> NOTICE: BL31: v1.3(release):f9b244b
> NOTICE: BL31: Built : 13:59:16, Dec 4 2017
> PMUFW: v0.3
> zynqmp_clk_get_peripheral_rate mio read fail
> failed to get rate
> zynqmp_clk_get_peripheral_rate mio read fail
> failed to get rate
>
>
>
> Is there something wrong with my setup? I have no modifications so far.
>
>
> It looks like the PMU FW config data hasn't been loaded. I'm not too sure how to do
> that from SPL though.
>
>
Yes this is not documented and I am not sure how it works through SPL either. Any inputs?
Is there a manual step to get PMU firmware in SPL boot.bin?
Thanks,
Manju
> Thanks,
> Alistair
>
>
>
>
>
>
>
> Mit freundlichen Grüßen
>
> Kind Regards
>
>
>
> Franz Forstmayr
>
> Research & Development
>
> Electronic Circuits and Systems
>
>
>
>
>
> Rosenberger Hochfrequenztechnik GmbH & Co. KG
>
> Hauptstraße 1, 83413 Fridolfing, Germany
>
> Phone
>
> +49 8684 18-0
>
> Fax
>
>
> franz.forstmayr at rosenberger.com <mailto:franz.forstmayr at rosenberger.com>
>
> www.rosenberger.com <http://www.rosenberger.com>
>
>
>
>
>
>
> The information contained in this message is confidential.
> Data security advice: Please be aware, that data exchange via Internet or E-
> Mail is not 100% safe. Therefore, please handle sensitive or confidential (bank) data
> with care. Please take note, that Rosenberger is not asking you for bank data or
> providing you such data via E-Mail, in principle. In case of deviations or questions
> please contact us immediately.
>
>
>
> **
>
> Rosenberger Hochfrequenztechnik GmbH & Co. KG, Registergericht:
> Amtsgericht Traunstein, HRA 5566
>
> persönlich haftender Gesellschafter:
> Rosenberger Hochfrequenztechnik GmbH, Registergericht: Amtsgericht
> Traunstein, HRB 4405
>
> Geschäftsführer: Dipl.-Kfm. Hans Rosenberger, Dipl.-Ing. Bernhard
> Rosenberger, Dipl.-Ing. Peter Rosenberger, Dr. rer. nat. Tosja Zywietz
>
> Disclaimer http://www.rosenberger.com/Disclaimer/disclaimer.html
> <http://www.rosenberger.com/Disclaimer/disclaimer.html>
>
>
> --
> _______________________________________________
> meta-xilinx mailing list
> meta-xilinx at yoctoproject.org <mailto:meta-xilinx at yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/meta-xilinx
> <https://lists.yoctoproject.org/listinfo/meta-xilinx>
>
>
>
More information about the meta-xilinx
mailing list