[meta-xilinx] Error launching ZCU102 minimal image on QEMU

[Pello Heriz]

Hi,

I'm trying to test my ZCU102 minimal image on QEMU emulator (I'm using
Morty branch).

I have got to compile the image, but when I execute 'runqemu zcu102-zynqmp'
command, everything looks to go OK until the execution arrives to this
point and get stack.

pello at pello-VirtualBox:/opt/yocto/poky/2.2/new_zcu102/build$ runqemu
zcu102-zynqmp
runqemu - INFO - Assuming MACHINE = zcu102-zynqmp
runqemu - INFO - Running MACHINE=zcu102-zynqmp bitbake -e...
runqemu - INFO - MACHINE: zcu102-zynqmp
runqemu - INFO - DEPLOY_DIR_IMAGE: /opt/yocto/poky/2.2/new_zcu102
/build/tmp/deploy/images/zcu102-zynqmp
runqemu - INFO - Running ls -t /opt/yocto/poky/2.2/new_zcu102
/build/tmp/deploy/images/zcu102-zynqmp/*.qemuboot.conf...
runqemu - INFO - CONFFILE: /opt/yocto/poky/2.2/new_zcu102
/build/tmp/deploy/images/zcu102-zynqmp/core-image-
minimal-zcu102-zynqmp-20170203125134.qemuboot.conf
runqemu - INFO - Continuing with the following parameters:

KERNEL: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/Image]
DTB: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb]
MACHINE: [zcu102-zynqmp]
FSTYPE: [cpio]
ROOTFS: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio]
CONFFILE: [/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.qemuboot.conf]

runqemu - INFO - Running /sbin/ip link...
runqemu - INFO - Setting up tap interface under sudo
[sudo] password for pello:
Lo sentimos, vuelva a intentarlo.
[sudo] password for pello:
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock...
runqemu - INFO - Created tap: tap0
runqemu - INFO - Running ldd /opt/yocto/poky/2.2/new_zcu102
/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64...
runqemu - INFO - Running /opt/yocto/poky/2.2/new_zcu102
/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64 -netdev
tap,id=net0,ifname=tap0,script=no,downscript=no -net nic -net nic -net nic
-net nic,netdev=net0,macaddr=52:54:00:12:34:02  -machine xlnx-zcu102  -m
2048 -initrd /opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170203125134.rootfs.cpio
-nographic -serial mon:stdio -serial null -kernel
/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/zcu102-zynqmp/Image
-append 'root=/dev/ram0 rw debugshell  mem=2048M ip=192.168.7.2::192.168.7.1
:255.255.255.0 console=ttyPS0,115200 earlyprintk' -dtb
/opt/yocto/poky/2.2/new_zcu102/build/tmp/deploy/images/
zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb
Warning: vlan 0 is not connected to host network

As you can see, the program get stack in this line and I don´t know why.

I would be very pleased if you answer to me as soon as possible.
Looking forward to your answer,
Best regards,
Pello
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170207/6a600186/attachment.html>