[meta-xilinx] [PATCH 5/7] zcu102-zynqmp: Default qemuboot to using Xilinx QEMU

[Nathan Rossi]

Currently the mainline QEMU is lacking full support for emulating the
ZCU102 board. So use the more functional Xilinx QEMU for this board.

Also reformat some of the appends to QB_* variables for clarity.

Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
---
 conf/machine/zcu102-zynqmp.conf | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/conf/machine/zcu102-zynqmp.conf b/conf/machine/zcu102-zynqmp.conf
index 10b8575425..3f38296c77 100644
--- a/conf/machine/zcu102-zynqmp.conf
+++ b/conf/machine/zcu102-zynqmp.conf
@@ -1,7 +1,6 @@
 #@TYPE: Machine
 #@NAME: zynqmp-zcu102
 #@DESCRIPTION: Machine support for ZCU102 Evaluation Board.
-#
 
 require conf/machine/include/tune-zynqmp.inc
 require conf/machine/include/machine-xilinx-default.inc
@@ -29,20 +28,21 @@ QB_MEM = "-m 2048"
 QB_OPT_APPEND = "-nographic -serial mon:stdio -serial null"
 QB_NETWORK_DEVICE = "-net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@"
 
-# Xilinx QEMU options
-QB_OPT_APPEND_append_qemuboot-xilinx = " -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/zcu102-arm.dtb "
+# Xilinx QEMU options, default to using Xilinx QEMU
+XILINX_QEMUBOOT = "1"
 
-# Reset and unhalt CPU0
-QB_OPT_APPEND_append_qemuboot-xilinx = " -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 "
-
-# Load the boot media
-QB_OPT_APPEND_append_qemuboot-xilinx = " -device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware-${MACHINE}.elf,cpu-num=0 \
+# Reset and unhalt CPU0, load the boot media.
+QB_OPT_APPEND_append_qemuboot-xilinx = " \
+		-hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/zcu102-arm.dtb \
+		-device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 \
+		-device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware-${MACHINE}.elf,cpu-num=0 \
 		-device loader,file=${DEPLOY_DIR_IMAGE}/u-boot.elf \
 		"
 
 # Load the kernel image so the user can run 'booti 0x80000 0x6000000 0x4000000' to boot the kernel
 QB_DEFAULT_FSTYPE_qemuboot-xilinx = "cpio.gz.u-boot"
 QB_ROOTFS_OPT_qemuboot-xilinx = " -device loader,addr=0x6000000,file=@ROOTFS@,force-raw=true"
-QB_OPT_APPEND_append_qemuboot-xilinx = " -device loader,addr=0x4000000,file=${DEPLOY_DIR_IMAGE}/${QB_DTB} \
+QB_OPT_APPEND_append_qemuboot-xilinx = " \
+		-device loader,addr=0x4000000,file=${DEPLOY_DIR_IMAGE}/${QB_DTB} \
 		-device loader,addr=0x80000,file=${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} \
 		"
-- 
2.11.0