[meta-xilinx] QEMU produced no output

[Peter Smith]

Hi,

I have built core-image-minimal from Morty branches of poky and
meta-xilinx, build completes withoiut issue (providing I remove ATF from
image extra dependsdue to the binutils issue). I then do a runqemu
zcu102-zynqmp whuich produces the following output and no more. I can get
back to the QEMU console no qemu is still running OK. I have read in other
places that this problem has been seen before when booting without u-boot,
is this the same or a new problem?


​peter at peter-VirtualBox:/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build$
runqemu zcu102-zynqmp
runqemu - INFO - Assuming MACHINE = zcu102-zynqmp
runqemu - INFO - Running MACHINE=zcu102-zynqmp bitbake -e...
runqemu - INFO - MACHINE: zcu102-zynqmp
runqemu - INFO - DEPLOY_DIR_IMAGE:
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp
runqemu - INFO - Running ls -t
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/*.qemuboot.conf...
runqemu - INFO - CONFFILE:
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114175046.qemuboot.conf
runqemu - INFO - Continuing with the following parameters:

KERNEL:
[/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image]
DTB:
[/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb]
MACHINE: [zcu102-zynqmp]
FSTYPE: [cpio]
ROOTFS:
[/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114201401.rootfs.cpio]
CONFFILE:
[/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114175046.qemuboot.conf]

runqemu - INFO - Running /sbin/ip link...
runqemu - INFO - Setting up tap interface under sudo
[sudo] password for peter:
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock...
runqemu - INFO - Created tap: tap0
runqemu - INFO - Running ldd
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64...
runqemu - INFO - Running
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-aarch64
-netdev tap,id=net0,ifname=tap0,script=no,downscript=no -net nic -net nic
-net nic -net nic,netdev=net0,macaddr=52:54:00:12:34:02  -machine
xlnx-zcu102  -m 2048 -initrd
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/core-image-minimal-zcu102-zynqmp-20170114201401.rootfs.cpio
-nographic -serial mon:stdio -serial null -kernel
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image
-append 'root=/dev/ram0 rw debugshell  mem=2048M ip=192.168.7.2:
:192.168.7.1:255.255.255.0 console=ttyPS0,115200 earlyprintk' -dtb
/media/peter/47b5785c-f3af-4568-b073-30b79b3bd537/peter/Morty/build/tmp/deploy/images/zcu102-zynqmp/Image-zynqmp-zcu102-revB.dtb
Warning: vlan 0 is not connected to host network
​



-- 
Best Regards
Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170115/f91655b8/attachment.html>